- Steering & Suspension
- Chassis, Roll Cage, Frame Rail, Subframe & Front Suspension Kits
- Speedtech Performance Pro Touring Subframe for 1967-1969 Camaro/Firebird and 1968-1974 Nova
The Speedtech Pro Touring subframe is an affordable bolt-in replacement that is also designed to upgrade from your worn out old factory subframe and take your first generation GM F-Body or X-Body car to a new performance level. Speedtech Performance's Pro Touring subframe offers the benefits of: Rack and pinion rear mount steering, built in Guldstrand Mod (this gives additional negative camber), coil over shock compatible, adjustable transmission crossmember and more. You can reuse all your current aftermarket suspension components such as control arms and sway bar, brakes and wheels.
Show More
For maximum handling and performance, upgrade to Speedtech's High Clearance tubular control arm set to hold up to a P275 tire on a 10'' wheel. The subframe accepts small and big block Chevy engines using the stock oil pan as well as the popular GM LS series engines using most after market oil pan and motor mount adaptors.
Bare Subframe Features:- Strong Box type laser cut and jig welded construction, reduced weight over factory frame, only 125 lbs.
- Factory alignment holes offer ease in the installation and alignment of the subframe to the body and bumper.
- Guldstrand mod geometry already built-in, upper control arm mounts feature additional camber curve adjustability.
- Set up for true coil over shocks and rack and pinion type steering.
- Accepts Air Ride Shockwave systems.
- Directly bolt on any factory replacement tubular control arms that worked with your original frame
- Will also work with factory style spring set up
- Extra adjustments built into the frame to fine tune your suspension.
- Built-in tow/ tie down hooks eliminate strapping around painted frames.
- Can reuse your existing sway bar if using any factory replacement tubular control arms
- Motor stands accept small or big block engines with stock type oil pan.
- Accepts LSX engines with Speedtech fabricated oil pan and motor mounts.
- Increased header and exhaust clearances
- Fully adjustable rear cross member fits all GM transmissions as well as T-56 and TKO.
The Bare Subframe works with the following required/optional parts: - Unisteer Power Rack and Pinion System p/n 668-8010540-01 or Unisteer Manual Power Rack and Pinion System p/n 668-8000770-01 (required)
- QA1 Coil-Over shocks p/n 122-DS402 (or equivalent - optional)
- QA1 T-bar Kit for shocks p/n 122-BAR350K (required if QA1 shocks are used)
- Speedtech Sway Bar exclusively for use with Speedtech High Clearance Control Arms p/n 967-233505 (required only if Speedtech High Clearance Control Arms are used)
Complete Bare Subframe Packages also include: - Speedtech geometry correcting High Clearance upper and lower tubular control arms, powder coated gloss black and fully assembled. Speedtech High Clearance control arms have been tested to fit a 18'' x 10'' wheel with a 7'' back space
- Heat treated high clearance tubular 1 1/4" sway bar kit, powder coated gloss black.
- Power rack and pinion unit with steering arms for use with GM Camaro spindles or optional ATS AFX spindles.
- Viking Double adjustable coilover shocks, including thrust washers and adjusting wrench.
- Adjustable engine frame stands.
- Mounting hardware, instructions, and custom alignment specs.
Note: Custom Show Quality Powder Coated Frame and Components Shown for Illustration Purposes. Speedtech offers optional Subframe Powder coating in Flat Black, Semi-Gloss Black and Gloss Black for an additional $500.00 charge or in Gunmetal Grey and Silver for an additional $550.00 charge.
Which Speedtech Performance Pro Touring Subframe Is Best?
JEGS offers four subframe options from Speedtech. The Bare Pro Touring Subframe is a great option for those looking to enhance the handling of their car while keeping their budget in check.
When upgrading to a big block, the 68 Camaro Pro Touring Subframe Package is the way to go. The kit includes upper and lower control arms, double adjustable coil-overs, and more.
How Much Does a Speedtech Performance Pro Touring Subframe Cost?
Prices start at just under $3,000 and go to $5,500 for a complete kit. No matter which kit you choose, you are sure to get a quality product that enhances the overall performance of your classic muscle car.
At JEGS, you'll find top name brands like Speedtech at affordable prices, backed by customer service that's second to none.
Replace your old and worn-out Camaro subframe with a new one from Speedtech. Each square inch was engineered to be far superior in terms of reliability and durability. Planning to drop a big block Chevy engine in your Camaro, Firebird, or Nova? No problem, the subframe is designed to accept BBC and LS engines using the stock oil pan.
Not only does the subframe look great, but it adds increased rigidity and strength to your unibody while reducing overall weight. It comes in at just 125 lb, which is considerably less than the stock subframe.
What Are Common Pros and Cons?
The Pro Touring 1968 Camaro subframe from Speedtech is a great option for anyone looking to upgrade their car. It offers increased rigidity, durability, and strength while reducing overall weight. It is also designed to accept bigger crate engines.
However, there are a few things to keep in mind before purchasing this subframe. First, note that the subframe does not include a front sway bar. Second, the price is considerably higher when compared to stock subframes. But overall, the Speedtech Performance Pro Touring Subframe for the 1967-1969 Camaro/Firebird and the 1968-1974 Nova is a great option for anyone looking to upgrade the handling.