- Power Adders
- Turbo
- Turbo Accessories
- TiAL Sport GT30 Lightweight Stainless Steel Turbine Housings
TiAL GT30 V-band Turbine Housings are physically smaller than traditional cast turbo housings and offer nearly a 33% weight reduction. TiAL Turbine Housings are designed to mate with Garrett GT Series Turbocharger's and are offered in a variety of A/R sizes. Typically a smaller A/R will offer quicker spooling for better response at lower RPM's. The downside to choosing a lower A/R is that you sacrifice peak power at high RPM's due to the higher exhaust back pressure. Typically higher A/R housings are chosen for racing applications and lower A/R's are chosen for street applications.
Show More
Features:
- Fits Garrett GT/X 30 series turbochargers
- Inlet Flange: 2.125'' O.D., Outlet Flange: 3.00'' O.D.
- Compatible with the 84 trim 60mm turbine wheel
- Housing weight 5.8 lbs. (largest A/R)
- 33% Turbocharger weight reduction vs. iron housing
- Investment cast stainless steel for a beautiful, smooth interior and exterior
- V-band inlet and outlet gets rid of gaskets and bolts, no leaks and no broken bolts
- Overall physical size is smaller than standard housing, allowing it to fit in tight engine bays
- Better heat retention than cast iron
- Inconel bolts provided for vibration and stretching resistance in extreme applications
- Locking tabs included for high vibration applications
- Pivoting of the turbo 360° possible
- NOTE: These housings will not work with the 700177-23 GT3071R CHRA, the heat shield is different, you must use the 700177-22 CHRA
- Turbine Housing
- Three Moon Tabs
- Six Inconel Bolts
- Three Locking Tabs