ATK Engines DFN1 Remanufactured Crate Engine for 1994-1996 Ford F-Series Truck & E-Series Van with 302ci/5.0L V8
059-DFN1
Product Q&A
View Now
Gasoline V8
ATK Core Return Process
JEGS and ATK appreciate your business and want to ensure that your core return is as smooth as possible.
Please CLICK HERE for ATK Core Return Process
Notes:
- VIN N
- Head Cast #: E5TE, E7TE
- Block Cast #: E7TE, F1SE
- EFI
- Roller cam
- Knock sensor hole in block
- SMOG holes in rear of heads
- Windsor firing order
Engine Break-In Procedure
Use conventional or break-in oil (non-synthetic) for the first 600 miles of operation. Do not drive for long periods at any single speed, always vary your speed. Do not tow a trailer or put other heavy loads on the vehicle. Check the engine oil and coolant levels daily.
At 600 Miles change the engine oil and filter using conventional (non-synthetic) oil. Check fuel and ignition settings; adjust valves (where applicable).
After the first 5,000 of service synthetic engine oil may be used. Follow your vehicle owner’s manual for service intervals.
Specifications:
Can you put carb on this motor
Does the block come with rockerarms?lifters, pushrods?
Will this engine comply with California smog rules?
Will I have to reprogram my PCM to accommodate this cam….or is it the same as the stock cam?? Must pass smog. CA.
Can this be ordered with a double roller timing chain Ser?
1. Can this be ordered with a different cam? 2. Can this be ordered with ported/gasket matched/polished GT40 heads with springs to match the cam?
Any idea of how many HP this engine is making if installed will stock MAF intake, computer, etc?
Can I use this in a 72 mustang with a FMX trans?
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.