Advance Adapters 50-9102 Features:
- The 700R automatic transmission adapter to the Jeep New Process 231 is 1.50 in.� in length. The adapter material is 356 T6 heat treated aluminum alloy and has a provision for a transmission mount. The adapter kit includes an adapter housing, new 23 spline 700R4 output shaft, bearing, snap rings, o-ring, seal, gasket, fastening hardware and adapter instructions.
- Transfer Case
- The adapter assembly will fit the Jeep NP231 transfer case with a 23 spline input shaft. Introduced in 1988, the Jeep NP231 is a part-time transfer case became the standard for XJ and YJ models. It was also used in six cylinder ZJ models through 1995. Chain driven with a 2.72:1 low range, it's reliable even with more than stock horsepower applied.
- The kit is designed to fit Jeep New Process 231, 242, 247, 249, and 2410 Rock-Trac transfer cases.
- Transmission
- This kit is designed for exclusive use with the 700R-4 / 4L60 / 4L60E. The overall case length of the transmission is 23.375 in.�, has non-removable bell housing, and a 4 bolt square rear case. Late model 4L60E automatics will have removable bell housing and a 6 bolt hex pattern rear case.
- GM AUTO TRANSMISSION O RING / 716511
- GASKET-N.P.208 TRANSFER CASE / 716517
- SEAL CR#19466 / 716729
- ADAPTER- TH350 TO JEEP NEW PROCESS / 51-6800
- SHAFT- 700R4 OUTPUT TO JEEP 23 SPLINE / 52-9101
- GM 700R/4L60E NYLON BUSHING / 716082
- STUD BOLT 3/8 -16 X 2 LG B7 / 723711
- BOLT 3/8 -16 X 1.25 in. SHCS ZNC / 723730
- 10mm-1.5THR X 40mm S.H.C.S. black oxide / 720046
- NUT 3/8 -16 PLATED GRD 5 / 723701
- LOCK WASHER 3/8 ZINC / 723704
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.