FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Be Cool Radiators 62187 - Be Cool Ford/Mercury Direct-Fit Aluminum Radiators

Be Cool Radiators 62187 - Be Cool Ford/Mercury Direct-Fit Aluminum Radiators

Be Cool Radiators#134-62187

Aluminum Radiator
  • 1967-70 Mustang/Cougar
  • 33''W x 18''H
  • Crossflow Conversion
  • Auto Trans
  • Natural Finish

    Be Cool Radiators 62187 - Be Cool Ford/Mercury Direct-Fit Aluminum Radiators Details

    Automatic Transmission Applications

  • Natural Finish

    Inlet Location & Size: Passenger Side / 1-1/2''
    Outlet Location & Size: Driver Side / 1-3/4''
    Core Type: Dual
    Radiator Height: 17-1/2''
    Radiator Width: 32-1/2''
    Radiator Thickness: 3''
    Radiator Core Height: 17''
    Radiator Core Width: 27''
    Radiator Core Thickness: 2''
    Notes:
  • Modification of top mounting plate for crossflow conversion may be required.
  • Modification to upper and lower radiator hoses (and transmission lines, if equipped) required for crossflow upgrade.
  • With driver side water pump outlet
  • Drilling required for some pin, foot, or flange mounted radiators.
  • Top radiator mounting plate modification, may be required.
  • Battery relocation required.
  • Be Cool Radiators 62187 - Be Cool Ford/Mercury Direct-Fit Aluminum Radiators

    Direct Replacement, All Aluminum Radiators

    O.E.M. radiators are just that, Original Equipment. They are designed to cool stock applications and overheating can take the fun out of cruising your hot rod or muscle car quickly. Be Cool designs their radiators in the same ''Crossflow'' / ''Downflow'' configuration as the original radiator to avoid any installation issues but that is where the similarities stop! Crossflow radiators are constructed with their tanks on the sides, while a Downflow radiator has its tanks on the top and bottom of the core. A commonly asked question is: Which is better, a Crossflow or Downflow radiator? The answer: Both will cool the same as long as the core surface of the radiator is the same in square inches.
    Cooling monster motors, especially when faced with common problems like tight spaces and small grille openings can be a challenge. Be Cool's cooling technology produces radiators that are 40% lighter than conventional O.E.M. units, yet have greater cooling power. These aluminum radiators feature a dual 1'' tube core, .080'' thick aluminum tanks. They are manufactured with OEM-sized inlets and outlets in the correct OEM locations. Additionally, they come with a billet filler neck and a brass petcock. Each radiator is 100% pressure tested before being shipped in expanding foam packaging. Their epoxy-free construction provides better heat dissipation, too, while allowing complete repairability. They are available in a natural aluminum or a mirror-polished finish that is real show stopper!
    All Be Cool radiators are compatible with all coolants and 100% Made In The USA! They are Guaranteed to lower your coolant temperature a minimum of 20-degrees, or your money back! In fact most customers report even greater coolant temperature drops. If you have a stock vehicle think O.E.M., but if you have a performance vehicle you should consider Be Cool! Made In The USA.

    Features:
  • All Aluminum Construction
  • Dual 1'' Tube Core
  • Single Pass Design
  • Billet Filler Neck with High Capacity Over Flow Tube
  • Form-Folded Straight Tanks
  • OE Inlet/Outlet Sizes and Location
  • Custom Fit for Direct Replacement Mounting
  • Automatic Transmission Radiators feature a Built-In Heavy Duty Cooler
  • 100% Pressure Tested
  • Durable Packaging
  • Made In The USA

  • JEGS Performance Products 15264 - JEGS Aluminum AN & NPT Weld Fittings
    Only $5.99

    JEGS Performance Products 80760 - JEGS Radiator Fin Comb
    Only $11.99

    JEGS Performance Products 51156 - JEGS Inline Radiator Hose Drain
    Only $24.99

    JEGS Performance Products 15265 - JEGS Aluminum AN & NPT Weld Fittings
    Only $6.99


    See All Items You Need