12 Days of Christmas
1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Shop By Vehicle
Shop By
Category
All Categories

Rebates
Gift Certificates
My Account
E-Mail Signup
Catalog Request
Help

Brodix 3180000

B1 BA Series Cylinder Head 195cc Intake Ports

Brodix 3180000

158-3180000

jegs shipping
FREE Shipping
Ships 12/20/16 if Ordered Today
Brodix 3180000 B1 BA Series Cylinder Head 195cc Intake Ports $805.08
B1 BA Series Cylinder Head
  • 195cc Intake Ports
  • 65cc Combustion Chambers
  • 2.080'' Intake / 1.600'' Exhaust Valve Sizes
  • Bare, 1/pkg.

  • Brodix 3180000 Details

    B1 BA Series Cylinder Heads

  • 195cc Intake Port Volume
  • Unassembled, Bare Head
  • This head is sold as an unassembled bare casting. It is finished machined and includes valve guides and valve seats installed. This head does NOT include rocker studs, valves, springs, retainers or locks.

    Cylinder Head Specifications
  • Intake Port Volume: 195cc
  • Combustion Chamber Volume: 65cc
  • Valve Sizes: 2.080'' Intake / 1.600'' Exhaust ( 11/32'' Stem Diameter )

    Facts and Related Components
  • Torque Heads: 70 ft-lb. with 7/16'' Studs; 100 ft-lb. with 1/2'' Studs
  • Torque Rocker Studs: 30 ft-lb.
  • Intake Gasket: Fel-Pro 1213 (p/n 375-1213)
  • Head Gasket: Fel-Pro 1008 (p/n 375-1008)
  • Exhaust Gasket: Fel-Pro 1413 (p/n 375-1413)
  • Head Studs: ARP 144-4204 (p/n 070-144-4204)
  • Spark Plug Specs: 14mm Thread, .750'' (3/4'') Reach, Gasket Seat
  • Valve Angle: 18° Intake and Exhaust
  • Valve Centerline: B1 BA Series - Standard; B1 BA MC Series - 60/100
  • Angle Milling: N/A
  • Flat Milling: .0055'' per cc
  • Pushrod Slots: Standard
  • Pushrods: Special Length
  • Rocker Arms: B1 BA Series - If using an ''R'' Block that oils through the pushrods, small block Chevrolet rockers may be used. Special guide plates may have to be fabricated to use the Chevrolet rockers. If using a standard Chrysler 340ci or 360ci block, standard adjustable Chrysler rocker arms may be used with special B1 stands. B1 BA Shaft System that can be used, if desired, T&D 8019, Jesel KPS 11663
    B1 BA MC Series requires a shaft mounted rocker system, T&D 8017, Jesel KPS 23998
  • Lifters: Standard
  • Pistons: Standard Closed Chamber (B1 BA); Special 18° (B1 BA MC)
  • Spring Pockets: May not be cut any larger or deeper than 1.550''
  • Accessory Bolt Holes are NOT Drilled
  • Recommended Intake Manifold: Standard Small Block Chrysler on B1 BA Series; W-5 or W-7 Chrysler Manifold on B1 BA MC Series

  • Specifications:

    Manufacturer's Part Number:
    3180000

    Powerhouse Small Block Mopar Heads!
    18° Intake & Exhaust Valve Angles

    The Brodix small block B1 BA Series is usable for many applications such as Pro Street, oval track, and drag racing. Standard exhaust headers, intake manifolds, and valve covers may be used. A relocated spark plug, along with improved port and combustion chamber design, provides excellent performance gains over any other Mopar compatible heads. If using an ''R-Block'' that oils through the pushrods, small block Chevrolet rockers may be used. Special guide plates may have to be fabricated to use the Chevrolet rockers. If using a standard Chrysler 340/360ci block, standard adjustable Chrysler rocker arms may be used with special B1 stands. Some stock manifolds may require milling.
    The B1 BA MC Series has a moved valve centerline and unmachined pushrod slots. This moved centerline requires a shaft mounted rocker system, and uses an intake manifold that works with W-5 or W-7 cylinder heads. The exhaust face is also left blank so that a W-5, W-7, or stock exhaust pattern can be drilled.
    Every casting is poured from A-356 virgin aluminum and tested before Brodix utilizes their in-house processes such as finish machining and heat treating to assure that you receive the best products for your hard-earned money. Other features include a thick deck surface that is compatible with nitrous, drilled and tapped holes on the ends for standard drive accessories, phosphorous bronze valve guides and ductile iron valve seats installed. Sold Individually, 1/pkg. Made in the USA!

      VALVE SPRING   Specs
      1.550'' Diameter Valve Spring for Mechanical Roller Lifter Cam
  • Spring Pressure Open: 550 lbs.
  • Spring Pressure Closed: 240 lbs.
  • Installed Height: 1.950''
  • Max Lift: .700''
  • Items You Need