FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Caspers Electronics 102159 - Caspers Electronics Manual Coolant Fan Controller

Caspers Electronics 102159 - Caspers Electronics Manual Coolant Fan Controller

Caspers Electronics#182-102159

Manual Coolant Fan Controller
  • GM Corvette
  • 2005-2013
  • C6 Corvette, Z06, ZR1

    Caspers Electronics 102159 - Caspers Electronics Manual Coolant Fan Controller Details

    Finally, a manual fan controller for the C6! New design Plug And Play module installs easily to the PWM-controlled coolant fan found on the C6 Corvette. The factory coolant fan is powerful and incorporates a solid-state controller instead of relays (as in previous years and models). This module interfaces with the factory controller and permits manual coolant fan control. This module simply plugs into the fan connector and includes a round rocker switch that matches similar design control switches found in the console. Using this switch allows the vehicle operator to manually override the ECU control of the coolant fan, to force-cool the engine, even when the car is unattended and not running. Ideal for off-road racing and competition use. Control Module is designed to plug in-between the sealed fan connector and its mate. Harness can be run thru the driver side door jamb, under the weatherstrip and into the passenger compartment without the need to drill thru the firewall.

    Caspers Electronics 102159 - Caspers Electronics Manual Coolant Fan Controller

    This ''Plug-And-Play'' module is designed to allow the driver of the vehicle to manually override the factory coolant fan control using a miniature 3-way toggle switch. Use of this control permits manual high and low fan control resulting in a cooler operating engine. Cooler engine operation equates to more power and less heat-soak for maximum performance.

    The module attached to the wiring bulkhead on the passenger side fender well. Be sure to attach grounding ring to frame bolt on the inner fender strut near the module location. Control switch can be conveniently mounted in the passenger compartment for instant high and low control of the coolant fan. Switch requires 1/4'' mounting holes and must be fed through the firewall via detachable harness. Alternate installation can be achieved by routing wiring harness through door the door jam into passenger compartment center switch position is ''Normal''. notched position is ''High'' and switch opposite of high speed is ''low'' speed override.

    Grime Boss A541S30X - Grime Boss Hand Wipes
    Only $9.99

    Grime Boss A544R10X - Grime Boss Hand Wipes
    Only $4.69