COMP Cams 181701 - Comp Cams FastLapSim5 Simulators
JEGS Part Number: 249-181701FastLapSim5 Track/Vehicle Simulator
COMP Cams 181701 Details
Brake hard into a turn...then nail the throttle and send the engine through its power curve until it reaches peak engine rpm...once again slam on the brakes and dive into the next turn...now, repeat this one hundred times! Evaluating suspension, tires, gear ratios, camshafts, headers, and the hundreds other components that make up a competitive road-course vehicle is an expensive and never-ending job. FastLapSim5 lets you accurately simulate vehicle components, try unique combinations, and test the entire race car before you twist a single wrench. And it's fun, too!
FastLapSim5 includes a Track Window that provides an "overhead" view of real-time vehicle movement (you'll see understeer, oversteer, and all driver corrections!). Watch as your test vehicle traverses every straightaway and turn and remains fully synchronized with comprehensive telemetry displayed on the results graphs. Zoom-in and out on both Track and Telemetry to uncover every nuance of vehicle performance. FastLapSim5 provides a real-time G-G Diagram that graphically indicates the sum of all forces acting on the vehicle. Each dot on the G-G Diagram indicates the equivalent force on the vehicle at each 0.001-second throughout the timed lap. A quick glance reveals whether vehicle was able to maintain its maximum G "envelope" throughout the course. Use this data, and the extensive chassis-tuning information provided in the over 160-page, color, Users Manual, to build the ultimate vehicle for any asphalt, closed-course track.
Software Overview: FastLapSim5 accurately simulates the unimaginably complex interaction of forces, speeds, and accelerations generated by stock, high-performance, or all-out race vehicles. A comprehensive step-by-step analysis of the interrelated physics is performed during every increment of vehicle motion (full analysis is completed 1000 times per second!). FastLapSim5 derives an optimum driving path, braking points and forces, aerodynamics, throttle positions, transmission gears, shift-up and shift-down points, steering input, driver error, and more! Further analysis determines the best possible elapsed time for any track. Change any component in seconds and run back-to-back tests to "home in" on the ultimate setup for any vehicle and track. Accurate, easy-to-use, state-of-the-art and great fun; FastlapSim is an awesome simulation that, we are sure, will become the most valuable addition to your racer's toolkit.
User Interface And Features: FastLapSim5 incorporates ProRacing Sim Software's new user interface built from the ground-up for Windows95/98/Me and WindowsSim/XP and Vista. Our easy-to-use interface boasts QuickAccess buttons and DirectClick menus that let you change parts simply by clicking on any component. Nothing could be easier! Analyze vehicle speed, lateral or longitudinal G's, rpms, damper forces, suspension movement, tire loads, and much more. View race results in full-color graphics. All data and graphs can be printed (and previewed) in color on any Windows printer. Even model several vehicles at once; just click on a Vehicle Selection Tab to focus on any vehicle you choose.
The Track Editor: You can run any vehicle you design on any of the 40+ built-in tracks (includes many of the World's best-known race courses). Or design any track you can dream up using a fully-graphic Track Editor! This powerful "application" built into FastlapSim5 lets you construct any track with any number of turns, turn radii, straightaway lengths, track widths, and more. Simply place corner points and the Track Editor draws the interconnecting track. Set the corner radii, fine tune the track points, and take your test vehicle for a "spin." Build any track from a parking-lot autocross to a multi-mile twister! Build an imaginary track, or precisely construct a real-world track for methodical testing. Either way, the Track Editor expands the modeling capabilities of FastlapSim5 to limits of your imagination!
Keep It Simple: But the incredible modeling power in FastLapSim5 is only the beginning. ProRacing Sim Software carefully designed this simulation so that it shows you exactly the level of detail you would like to see. Start out with an easy-to-read, Pop-Up Lap-Time Slip that offers an instant summary of the performance potential of any vehicle. Or open the SimData window for a more in-depth view of vehicle data. Move the reticule on the data display, and the SimData window shows the exact numerical values for over 60 vehicle measurements, including speed, lat and lon Gs, rpm, hp, torque, yaw, pitch, roll, yaw rate, body drag, body lift, front and rear wing lift and drag, throttle, brake, steering input, trans gear, suspension compliance, spring forces, damper velocities, slip angles, and much more! Dig even deeper and zoom in on the data display analyze vehicle movement in minute detail. It's all up to you.
Compatibility: Since FastLapSim5 accepts DynoSim5 and DeskTop Dyno5 engine test files (you can also manually enter any engine power curves), it is possible to test various engine components and measure their on-track effects. Imagine changing a camshaft then running a track analysis of the new power curve in just minutes! In the time it takes for you to dream up a new combination, you can perform an "on track" test and analyze the results!
ProTools: Professional racers and serious enthusiasts need all the modeling power they can get. The ProTools included in FastLapSim5 extend the functionality of many program features. For example, the Real-Time Data Display lets you view the simulation actually calculating the best speeds, braking points, etc. DataZones extend the most graphing and data analysis possible in the DeskTop program version. ProData displays extended vehicle performance data, including individual wheel telemetry, Track Segments that analyze performance through individual sections of the course, a Spring/Damper Calculator that helps you pick the optimum shocks and gear ratios. ProPrinting delivers a comprehensive test reports that includes your name, address, company logo, glossaries, and all ProData values. If you're serious about road racing analysis, consider FastLapSim5.
Users Manual: FastLapSim5 is supplied with a full-color, 160-page, on-disk Users Manual (directly accessible from within FastLapSim5) that details the features of this comprehensive simulation.
Requirements: FastLapSim5 runs on any IBM-compatible PC computer using Windows98/Me/2000/XP/Vista & Win7. FastLapSim5 is computationally intensive; so a faster system processor will speed up simulation results. A basic VGA video system is required (minimum 640 x 480; 1024 x 768 or greater is recommended). A Windows-compatible printer required for test reports. A CD-ROM is also required. A complete FastLapSim5 install requires approximately 120MBytes of disk space.
What You Can Do With FastLapSim5:
Tune These Key Elements:
Comp Cams FastLapSim5 Simulators
COMP Cams FastLapSim5 simulators accurately simulate the unimaginably complex interaction of forces, speeds, and accelerations generated by stock, high performance, or all-out race vehicles. A comprehensive step-by-step analysis of the interrelated physics is performed during every increment of vehicle motion (full analysis is completed 1,000 times per second!). The COMP Cams FastLapSim5 simulators derive an optimum driving path, braking points and forces, aerodynamics, throttle positions, transmission gears, shift-up and shift-down points, steering input, driver error, and more! Further analysis determines the best possible elapsed time for any track. Change any component in seconds and run back-to-back tests to "home in" on the ultimate setup for any vehicle and track.