Free Shipping on Auto Parts Orders Over $75.                           Order by 11 PM EST for Same Day Shipping!

COMP Cams 32-237-4 - Comp Cams 'Magnum' Mechanical Flat Tappet Camshafts



COMP Cams 32-237-4 - Comp Cams 'Magnum' Mechanical Flat Tappet Camshafts
COMP Cams 32-237-4 - Comp Cams 'Magnum' Mechanical Flat Tappet Camshafts

JEGS Part Number: 249-32-237-4

Magnum 270S Mechanical Flat Tappet Camshaft
Lift: .540"/.540"
Duration: 270°/270°
Lobe Separation Angle: 110°
RPM Range: 1800-5800
  • Fits Applications:
  • 1970-1982
    FORD
    1977-1979
    LINCOLN
    1970-1979
    MERCURY
  • Click to see All

COMP Cams 32-237-4 Details

Ford 351C, 351M-400M 8 cyl. 1970-1982

  • Cams Are Very Aggressive
  • Designed For Performance Oriented Vehicles
  • Deliver More Power Than Standard Camshafts
  • 1 Year Limited Warranty

  • Comp Cams 'Magnum' Mechanical Flat Tappet Camshafts

    Magnum camshafts are very aggressive and specifically designed for the street enthusiast looking for more power with that Pro Street sound. Intended for performance oriented vehicles that will see little street use. The idle characteristics of your engine will change due to the increased duration and overlap of the Magnum Cam Series. You will notice a racey idle with the 282-grind while the 294 and 306-grinds will produce a rough or ''rumbly'' idle. Stock components are generally incompatible. Changes are needed in rear end gear ratios, headers and the torque converter. Comp Cams Magnum Cams will affect your power accessories to a certain extent. The 280 and 292-grinds are the biggest cams that should be used with power assisted brakes, air conditioning, etc. You should remember that the bigger the engine is, the less the cam will affect the vacuum which affects your power accessories. The smaller your engine is, the more the Magnum Camshaft will affect your power accessories. Most late model vehicles have a vacuum canister. If your vehicle does not have a vacuum canister, it may be necessary to add one.

    Features:
  • Great high RPM power
  • Easy on valve train parts
  • Can be used with mild ratio rocker arms and traditional performance valve springs
  • Best with aftermarket converter and 9.5:1+ compression

    270S Series
    The 270S Solid Magnum Cam is the perfect cam for small to medium cubic inch engines. The 270S delivers good low speed torque with a moderate noticeable idle. This cam is an excellent alternative to the 268H.

    282S Series
    The 282S Solid Magnum Cam is great for street machines because it can be driven daily and raced on weekends. This cam features a broad power curve and torque range with a mild rough idle.

    294S Series
    The 294S Solid Magnum Cam is a maximum performance cam. This cam should be used in high compression 4-speed cars. The 294S makes great top-end power and works well with ported heads.

    306S Series
    The 306S Solid Magnum Cam is an excellent grind for large cubic inch Pro-Street type engines. This cam has tremendous high RPM power and needs to be used with headers, intake and higher compression. This cam does not have the advance made into it and will need to be degreed in.

    Camshaft & Lifter Kits are indicated by a CL in their part number and include Camshaft, Lifters, Assembly Lube, Decals, and Instructions.

    Complete Kits are indicated by a K in their part number and include Camshaft, Lifters, Timing Chain & Gears, Valve Springs, Retainers, Locks, Assembly Lube, Decals, and Instructions.

    Small Kits are indicated by a SK in their part number and include Camshaft, Lifters, Timing Chain Set, Assembly Lube, Decals, and Instructions.

  • COMP Cams 32-237-4

    Exhaust Valve Lift (in.)
    0.54
    Intake Valve Lift (in.)
    0.540
    RPM Range
    1800-5800
    Exh. Duration @ .050 in. (Deg)
    224
    Int. Duration @ .050 in. (Deg)
    224
    Exh. Duration Advertised (Deg)
    270
    Int. Duration Advertised (Deg)
    270
    Engine Make/Size
    Ford 351C
    Lifter Type
    Mechanical Flat Tappet
    Engine Make/Size
    Ford 351M-400
    Usage
    Street/Strip
    Advertised Duration
    270 int./270 exh.
    Advertised Exhaust Duration
    270
    Advertised Intake Duration
    270
    Basic Operating RPM Range
    1,800-5,800
    Cam Style
    Mechanical flat tappet
    Computer-Controlled Compatible
    No
    Duration at 050 inch Lift
    224 int./224 exh.
    Exhaust Duration at 050 inch Lift
    224
    Exhaust Valve Lash (in.)
    0.022
    Exhaust Valve Lift with Factory Rocker Arm Ratio (
    0.54
    Grind Number
    FC 270S-10
    Intake Duration at 050 inch Lift
    224
    Intake Valve Lash (in.)
    0.022
    Intake Valve Lift with Factory Rocker Arm Ratio (i
    0.54
    Quantity
    Sold individually
    Valve Lift with Factory Rocker Arm Ratio
    0.540 int./0.540 exh.
    Valve Springs Required
    Yes
    Lobe Separation (Deg)
    110
    Manufacturer's Part Number:
    32-237-4
    COMP Cams 159 - COMP Cams Engine Break-In Oil Additive
    Only $13.99

    COMP Cams 611-16 - Comp Cams Valve Stem Locks
    Only $24.99

    JEGS Performance Products 80521 - JEGS Premium Stud Mount Valve Spring Compressor Tool
    Only $44.99

    JEGS Performance Products 80523 - JEGS Valvetrain Checking Springs
    Only $10.99


    See All Items You Need