1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Shop By Vehicle
Shop By
Category
All Categories

Rebates
Gift Certificates
My Account
E-Mail Signup
Catalog Request
Help

COMP Cams 623-100

Machined Steel Race Valve Locks GM Gen III LS1/LS2/LS6

COMP Cams 623-100

249-623-100

jegs shipping
FREE Shipping
Ships 12/05/16 if Ordered Today
COMP Cams 623-100 Machined Steel Race Valve Locks GM Gen III LS1/LS2/LS6 $189.99
Machined Steel Race Valve Locks
  • GM Gen III LS1/LS2/LS6
  • Angle: 7°
  • Valve Stem: 8mm
  • Single Groove
  • 100/pkg

  • COMP Cams 623-100 Details

    Race Valve Locks

  • 7° lock angle

  • Wider Angle
  • Precision Machined
  • Super Tough
  • Inside Tang
  • 1 Year Limited Warranty

  • Specifications:

    Lock Angle
    7 Deg.
    Lock Groove Quantity
    1-groove
    Lock Material
    Hardened steel
    Lock Style
    7 degree
    Manufacturing Process
    Machined
    Quantity
    Sold as a set of 200
    Recessed for Lash Cap
    No
    Valve Stem Diameter (mm)
    8
    Manufacturer's Part Number:
    623-100

    Most people believe that the tang inside a valve lock is what holds the valve spring retainer and spring in place while the engine is running, however tangs are not strong enough to withstand today's open spring loads of 1000+ pounds. The tang's sole purpose is to temporarily locate the lock, retainer, and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates the "collet effect" that binds the two together; the more spring force exerted on the retainer as the valve opens, the more force applied by the collet effect to keep the retainer and lock in place.

    With the emergence of valve sizes other than 5/16", 11/32", and 3/8", it is important to make sure valve locks match valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves are in contact without a gap, the valve locks are for a bigger stem. If the locks fit tight to the stem and leave a gap between the middle of the lock and the stem's outer diameter, the locks are too small for the valves. All locks should be checked before final installation to ensure they're the correct size.

    Comp Cams 7° Street Valve Locks are made from stamped, hardened steel. Designed for stock engine rebuilds and only recommended for street use with lighter spring loads. The 7° Race Valve Locks are available in Machined Steel or Titanium. They offer the same valve spring location accuracy as the 10° Super Locks, without the need to change to 10° retainers. Comp Cams 10° Super Locks handle higher spring pressures by distributing load over a larger area. This reduces the chance of a "pull-through" failure. Recommended for all race applications.

    Does COMP Cams 623-100 fit your vehicle?

    Narrow Results
    Filter By
    Year
    Filter By
    Make
    Filter By
    Model
    Filter By
    SubModel
    Filter By
    EngineType
    Filter By
    Liter
    Filter By
    Aspiration

    1998 CHEVROLET CORVETTE

    • EngineType: ALL
    • SubModel: INDIANAPOLIS 500 PACE CAR

    2001-2002 CHEVROLET CORVETTE

    • EngineType: ALL
    • SubModel: Z06

    1999-2002 CHEVROLET CAMARO

    • Liter: 5.7
    • Aspiration: N
    • SubModel: Z28
    • Engine Vin: G
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    2002 PONTIAC FIREBIRD

    • Liter: 5.7
    • SubModel: TRANS AM
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1998-2001 PONTIAC FIREBIRD

    • Liter: 5.7
    • Aspiration: N
    • SubModel: TRANS AM
    • Engine Vin: G
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1997-2002 CHEVROLET CORVETTE

    • Liter: 5.7
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: G
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1998-2002 CHEVROLET CAMARO

    • Liter: 5.7
    • SubModel: Z28 SS
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1998 CHEVROLET CAMARO

    • Liter: 5.7
    • SubModel: Z28
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1998-2002 PONTIAC FIREBIRD

    • Liter: 5.7
    • SubModel: FORMULA
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )
    Items You Need