FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Edelbrock 2131 - Edelbrock Performer Manifolds for AMC

Edelbrock 2131 - Edelbrock Performer Manifolds for AMC

Edelbrock#350-2131

Performer AMC Intake Manifold
  • AMC 290-401ci 1970-91
  • 4-bbl Square-Bore Carb Flange (non-EGR)
  • Idle-5500 rpm

    Edelbrock 2131 - Edelbrock Performer Manifolds for AMC Details

    AMC 290-401ci V8

    Designed for 1970-91 street 290-304-343-360-390-401ci V8 engines without EGR. Will not accept stock Motorcraft spread-bore carburetor. This intake manifold is for 360-401ci V8s with OEM carb; 1970-72; except stock equipped EGR.

    Installation Notes:

  • Port exit dimensions: 1.03'' x 2.07''
  • Recommended intake gasket: Fel-Pro 375-MS96011 or Edelbrock 350-7213
  • Manifold height: (A) 4.20'' , (B) 5.50''
    Click here to determine carburetor pad height.
  • Manifold has two center bolt holes offset
  • Throttle cable adapter p/n 350-8034 required for 1979 and later vehicles.

    Carburetor Recommendations:
    OEM 4-bbl. square-bore carb

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister
  • carb acceptable to factory cruise control

    Edelbrock Performer 600cfm Carburetor p/n 350-1405.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • carb acceptable to factory cruise control
  • carb has manual choke only

    Edelbrock Performer 600cfm Carburetor p/n 350-1406.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • carb acceptable to factory cruise control.

    Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1805.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • carb acceptable to factory cruise control
  • carb has manual choke only

    Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1806

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister
  • carb acceptable to factory cruise control

  • Edelbrock 2131 - Edelbrock Performer Manifolds for AMC

    Idle-5500 RPM Power!

    Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and a patented runner design that delivers outstanding performance. This patented design greatly improves torque over a wide rpm range, especially off-idle through 5500 rpm. Provides crisp throttle response.

    Edelbrock 350-2131

    Engine Make/Size
    AMC 290-401
    RPM Range
    Idle -5500
    Number Of Carbs
    One
    Emission
    Without EGR
    Cylinder Head Type
    Standard
    Usage
    Street/Hi-Performance
    Position
    N/A
    Note:To insure proper manifold to cylinder head sealing, Edelbrock recommends using an embossed intake gasket like Fel-Pro's Printoseal or Mr.Gasket's Ultra Seal. Fel-Pro's Perma Torque Blue and other similar gaskets do not compress well when used with an aluminum intake manifold and may cause vacuum leaks.
    Edelbrock 8008 - Edelbrock Performer Carburetor Stud Kit
    Only $6.99

    Edelbrock 8024 - Edelbrock Performer Carburetor Stud Kit
    Only $11.99

    JEGS Performance Products 28030 - JEGS RTV Silicone Gasket Maker
    Only $6.99

    JEGS Performance Products 83200 - JEGS Intake Manifold Bolts
    Only $10.99


    See All Items You Need