FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Edelbrock 7101K - Edelbrock Performer RPM Manifolds & Kits for Chevrolet

Edelbrock 7101K - Edelbrock Performer RPM Manifolds & Kits for Chevrolet

Edelbrock#350-7101K

Performer RPM Intake Manifold w/Installation Kit
  • SB-Chevy 262-400ci 1955-86
  • 4-bbl Square-Bore Carb Flange (non-EGR)
  • 1500-6500 rpm

    Edelbrock 7101K - Edelbrock Performer RPM Manifolds & Kits for Chevrolet Details

    Chevy 262-400ci Small Block V8

    This is a great value! These kits ensure that you'll get the job done right. Each kit includes an Edelbrock intake manifold, quality intake bolts, intake gaskets, carb gaskets, a tube of blue gasket sealer and we also throw in a set of carburetor studs.

    Designed for 1955-86 262-400ci Chevrolet V8s. Designed for maximum horsepower along with a broad torque curve for high-performance street/marine. Provides power like a single-plane and throttle response like a dual-plane. Has provisions to add oil fill tube. No provisions for exhaust heated or stock-style choke. Accepts late-model waterneck, air-conditioning, alternator and H.E.I. Will fit cast iron Chevrolet Bowtie heads but will not fit 1987 and later cast-iron heads. Will not fit under stock Vette hood.

    Installation Notes:

  • Port exit dimensions: 1.16'' x 1.92''
  • Manifold height: (A) 4.20'' , (B) 5.25''; Carb pad height = 4.73'' (This intake is .700'' taller than Performer intake p/n 350-2101.) Click here to determine carburetor pad height.
  • Recommended intake gasket; JEGS 555-210002
  • Use JEGS intake manifold bolt kit 555-83200

    Carburetor Recommendations:
    Edelbrock Performer 750cfm Carburetor p/n 350-1407
    Edelbrock Performer 800cfm Carburetor p/n 350-1412
    Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1812.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • carb requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kit
  • carb has manual choke only.

    Edelbrock Performer 800cfm Carburetor p/n 350-1413
    Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1813.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • carb requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kit.

  • Edelbrock 7101K - Edelbrock Performer RPM Manifolds & Kits for Chevrolet

    1500-6500 RPM Power!

    For the ultimate in street performance bolt on an Edelbrock Performer RPM manifold. These dual plane, high-rise intakes make incredible horsepower to 6500 rpm along with streetable torque for great throttle response. This broad power band makes Performer RPM ideal for street or strip. Their larger plenums and runners match the free-flowing exhaust, high-lift cams and other modifications of a high output engine. They are intended for high-performance street or competition engines that run up to 6500 rpm. They are not for emissions-equipped engines. Performer RPM manifolds match Performer RPM camshaft and cylinder heads for outstanding performance.

    JEGS Performance Products 15840 - JEGS Carburetor Stud Kits
    Only $5.99

    JEGS Performance Products 15841 - JEGS Carburetor Stud Kits
    Only $6.99

    JEGS Performance Products 15842 - JEGS Carburetor Stud Kits
    Only $6.99

    JEGS Performance Products 15845 - JEGS Carburetor Stud Kits
    Only $9.99


    See All Items You Need