12 Days of Christmas
1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Shop By Vehicle
Shop By
Category
All Categories

Rebates
Gift Certificates
My Account
E-Mail Signup
Catalog Request
Help

Hellwig 2520

LP-25 Progressive Rate Load Leveler Helper Springs

Hellwig 2520

207-2520

made in usa
jegs shipping
FREE Shipping
Ships
Hellwig 2520 LP-25 Progressive Rate Load Leveler Helper Springs $169.99
  • Fits Many Applications
  • 2500 lbs. Capacity
  • 3 Leaf Stack

    See "Fitment" Tab for more info

  • Hellwig 2520 Details

    LP-25 Progressive Rate Load Levelers

  • Mounting Kit Sold Separately
  • Adds New Life To Old Springs
  • Reduces Body Roll
  • Simple Bolt On Installation
  • Variable Rate Leaves Do Not Effect Ride When Unloaded
  • High Quality Spring Steel Leaves
  • Raised Height/Spring Rate Vary On The Adjustment Of Outer Upbolts
  • Limited Lifetime Warranty

  • Specifications:

    Manufacturer's Part Number:
    2520

    The Original Load Levelers

    The Hellwig Load Pro Series LP-25 and LP-35 Helper Spring Kits set the standard for all other aftermarket helper springs and are the true workhorse of the Hellwig Spring line. Manufactured with heat treated ASTM 5160 alloy spring steel these units increase your vehicles level load carrying capacity up to the manufacturer's GVWR (Gross Vehicle Weight Rating). Always operate your vehicle safely and never exceed the recommended GVWR, even when using helper springs. They feature a simple "Set it and forget it " bolt-on design using common hand tools, providing both ease of installation and hassle free use. Made in the USA.

    The Hellwig Load Pro Series Helper Spring Kits are available in both Progressive Spring Rate and Constant Spring Rate designs. The Progressive Rate design requires the truck to be loaded and it's spring compressed to activate the helper spring, therefore as the vehicles load increases the helper spring progressively increases its resistance to the load. The Constant Rate design allows the helper spring to immediately react to the vehicles load, therefore compressing very little as load is applied to the vehicle.

    Designed to be installed on full size pick-up trucks and vans, the Hellwig Load Pro Series LP-25 and LP-35 Helper Spring Kits require mounting hardware to accommodate 2 1/2" or 3" wide leaf springs. When ordering be sure to measure the width of your leaf springs and identify the Load Pro Spring kit to determine the appropriate mounting hardware kit to complete the installation.

    LP-25 Features:
  • Heavy Loads - 3-Leaf Stack
  • 2500 lbs. Level Load Capacity
  • Available in Progressive or Constant Rate
  • Design can handle the load 24/7
  • Mounting kit sold separately

    LP-35 Features:
  • Heaviest Loads - 4-Leaf and Up Stack
  • 3500 lbs. Level Load Capacity
  • Available in Progressive or Constant Rate
  • Offers the Maximum in Carrying Capacity
  • Recommended for 3/4 Ton and 1 Ton Applications
  • Mounting kit sold separately

    Note: Please use the "Filter By Vehicle" selection on the left below to find Hellwig Load Pro Series products for your vehicle.

  • Does Hellwig 2520 fit your vehicle?

    Narrow Results

    1980-1982 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: CUSTOM
    • EngineType: ALL

    1995-1998 DODGE RAM 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1980-1981 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: RANGER
    • EngineType: ALL

    1982 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: XLT LARIAT
    • EngineType: ALL

    1997 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.6
    • SubModel: BASE
    • CUI: 281
    • EngineType: V8 ( 4.6 L / 281 )

    1997-2001 DODGE RAM 1500

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • EngineType: ALL
    • SubModel: LARAMIE

    1983-1986 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.8
    • SubModel: BASE
    • CUI: 351
    • EngineType: V8 ( 5.8 L / 351 )

    1979 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 7.5
    • SubModel: RANGER LARIAT
    • CUI: 460
    • EngineType: V8 ( 7.5 L / 460 )

    2004 FORD F-250 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • SubModel: LARIAT
    • EngineType: ALL

    1992 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 7.5
    • SubModel: CUSTOM
    • CUI: 460
    • EngineType: V8 ( 7.5 L / 460 )

    1983 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: XLT
    • EngineType: ALL

    2006-2007 FORD F-350 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: HARLEY-DAVIDSON EDITION
    • EngineType: ALL

    1994 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: XLT
    • EngineType: ALL

    1979 FORD F-250

    • CC: 4917
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.9
    • SubModel: RANGER
    • CUI: 300
    • EngineType: L6 ( 4.9 L / 300 )

    1999 DODGE RAM 1500

    • CC: 5211
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.2
    • SubModel: ST
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1987-1990 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: XL
    • EngineType: ALL

    2005 FORD F-250 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: HARLEY-DAVIDSON EDITION
    • EngineType: ALL

    1992-1994 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: XL
    • EngineType: ALL

    1978 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1995-1996 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: SPECIAL
    • EngineType: ALL

    2004 FORD F-250 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • SubModel: KING RANCH
    • EngineType: ALL

    1995-1996 FORD F-350

    • CC: 4917
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.9
    • SubModel: XL
    • CUI: 300
    • EngineType: L6 ( 4.9 L / 300 )

    1978 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: RANGER
    • EngineType: ALL

    1995-1996 FORD F-250

    • CC: 4917
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.9
    • SubModel: XLT
    • CUI: 300
    • EngineType: L6 ( 4.9 L / 300 )

    2003-2004 FORD F-350 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • SubModel: KING RANCH
    • EngineType: ALL

    1982 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: XLT LARIAT
    • EngineType: ALL

    1997 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.6
    • SubModel: LARIAT
    • CUI: 281
    • EngineType: V8 ( 4.6 L / 281 )

    1991 FORD F-350

    • CC: 4917
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.9
    • SubModel: XL
    • CUI: 300
    • EngineType: L6 ( 4.9 L / 300 )

    1999 DODGE RAM 1500

    • CC: 3906
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 3.9
    • SubModel: ST
    • CUI: 239
    • EngineType: V6 ( 3.9 L / 239 )

    1987-1994 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: XL
    • EngineType: ALL

    1997 DODGE RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.9
    • Aspiration: T
    • SubModel: BASE
    • Engine Vin: D
    • CUI: 359
    • EngineType: L6 ( 5.9 L / 359 )

    1994-2002 DODGE RAM 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 359
    • EngineType: L6 ( 5.9 L / 359 )

    1997 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.6
    • SubModel: XL
    • CUI: 281
    • EngineType: V8 ( 4.6 L / 281 )

    1995-1997 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 7.5
    • SubModel: XLT
    • CUI: 460
    • EngineType: V8 ( 7.5 L / 460 )

    2004 FORD F-250 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • SubModel: HARLEY-DAVIDSON EDITION
    • EngineType: ALL

    1993-1994 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: XLT
    • EngineType: ALL

    1997 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.4
    • SubModel: LARIAT
    • CUI: 330
    • EngineType: V8 ( 5.4 L / 330 )

    1984 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: ALL
    • EngineType: ALL

    1997 FORD F-250 HD

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: ALL
    • EngineType: ALL

    1982-1986 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: XL
    • EngineType: ALL

    1991 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.8
    • SubModel: XL
    • CUI: 351
    • EngineType: V8 ( 5.8 L / 351 )

    1995-1997 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 7.3
    • SubModel: XL
    • CUI: 445
    • EngineType: V8 ( 7.3 L / 445 )

    1991 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.8
    • SubModel: XLT LARIAT
    • CUI: 351
    • EngineType: V8 ( 5.8 L / 351 )

    2004 FORD F-150 HERITAGE

    • EngineType: ALL
    • SubModel: ALL

    1999 FORD F-250

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 5.4
    • SubModel: XL
    • CUI: 330
    • EngineType: V8 ( 5.4 L / 330 )

    2005 FORD F-350 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: HARLEY-DAVIDSON EDITION
    • EngineType: ALL

    1997-1998 DODGE RAM 1500

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • EngineType: ALL
    • SubModel: ST

    1995-1996 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.0
    • Aspiration: N
    • SubModel: XLT
    • Engine Vin: N
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1995-1998 DODGE RAM 2500

    • CC: 7990
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 8.0
    • SubModel: BASE
    • CUI: 488
    • EngineType: V10 ( 8.0 L / 488 )

    2005-2007 FORD F-250 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: KING RANCH
    • EngineType: ALL

    1995-1996 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 7.3
    • SubModel: XL
    • CUI: 445
    • EngineType: V8 ( 7.3 L / 445 )

    1995-1997 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 7.5
    • SubModel: XL
    • CUI: 460
    • EngineType: V8 ( 7.5 L / 460 )

    1999 DODGE RAM 1500

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.9
    • SubModel: ST
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1995-1996 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.0
    • Aspiration: N
    • SubModel: XL
    • Engine Vin: N
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1985-1986 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: BASE
    • EngineType: ALL

    1997 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.4
    • SubModel: XL
    • CUI: 330
    • EngineType: V8 ( 5.4 L / 330 )

    1997 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.4
    • SubModel: BASE
    • CUI: 330
    • EngineType: V8 ( 5.4 L / 330 )

    1993 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 7.5
    • SubModel: XLT
    • CUI: 460
    • EngineType: V8 ( 7.5 L / 460 )

    1982-1983 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: XL
    • EngineType: ALL

    1994-2002 DODGE RAM 3500

    • CC: 7990
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 8.0
    • SubModel: BASE
    • CUI: 488
    • EngineType: V10 ( 8.0 L / 488 )

    1993 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.0
    • SubModel: XLT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    2005-2007 FORD F-350 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: LARIAT
    • EngineType: ALL

    1997 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 7.3
    • SubModel: BASE
    • CUI: 445
    • EngineType: V8 ( 7.3 L / 445 )

    2004 FORD F-350 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • SubModel: HARLEY-DAVIDSON EDITION
    • EngineType: ALL

    1979 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.8
    • SubModel: RANGER XLT
    • CUI: 351
    • EngineType: V8 ( 5.8 L / 351 )

    1980-1981 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: RANGER LARIAT
    • EngineType: ALL

    1998 DODGE RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 359
    • EngineType: L6 ( 5.9 L / 359 )

    1987-1991 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: CUSTOM
    • EngineType: ALL

    1980-1981 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: RANGER XLT
    • EngineType: ALL

    1999 FORD F-250

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 4.6
    • Aspiration: N
    • SubModel: XLT
    • Engine Vin: 6
    • CUI: 281
    • EngineType: V8 ( 4.6 L / 281 )

    2005-2007 FORD F-250 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: LARIAT
    • EngineType: ALL

    1982-1983 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: XLS
    • EngineType: ALL

    1991 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 7.3
    • SubModel: XL
    • CUI: 445
    • EngineType: V8 ( 7.3 L / 445 )

    1983-1984 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: XLT
    • EngineType: ALL

    1993 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 7.3
    • SubModel: XLT
    • CUI: 445
    • EngineType: V8 ( 7.3 L / 445 )

    1979 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 6.6
    • SubModel: RANGER XLT
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    2005-2007 FORD F-350 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: XLT
    • EngineType: ALL

    1978 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: CUSTOM
    • EngineType: ALL

    1987-1990 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: XLT LARIAT
    • EngineType: ALL

    1979 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 7.5
    • SubModel: RANGER XLT
    • CUI: 460
    • EngineType: V8 ( 7.5 L / 460 )

    1993 FORD F-250

    • CC: 4917
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 4.9
    • SubModel: XLT
    • CUI: 300
    • EngineType: L6 ( 4.9 L / 300 )

    2002-2003 FORD F-350 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 7.3
    • SubModel: XL
    • CUI: 445
    • EngineType: V8 ( 7.3 L / 445 )

    1987-1992 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: CUSTOM
    • EngineType: ALL

    1985-1986 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: XLT LARIAT
    • EngineType: ALL

    1992 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.8
    • SubModel: CUSTOM
    • CUI: 351
    • EngineType: V8 ( 5.8 L / 351 )

    1999 FORD F-250

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 5.4
    • SubModel: XLT
    • CUI: 330
    • EngineType: V8 ( 5.4 L / 330 )

    1994 DODGE RAM 3500

    • CC: 5900
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.9
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: 5
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    2001-2003 FORD F-150

    • Liter: 4.6
    • SubModel: XL
    • CUI: 281
    • EngineType: V8 ( 4.6 L / 281 )

    2000-2002 DODGE RAM 1500

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • EngineType: ALL
    • SubModel: ST

    2003-2004 FORD F-350 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 6.0
    • SubModel: XL
    • CUI: 363
    • EngineType: V8 ( 6.0 L / 363 )

    2000-2002 DODGE RAM 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1995 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: EDDIE BAUER
    • EngineType: ALL

    1979 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.8
    • SubModel: RANGER
    • CUI: 351
    • EngineType: V8 ( 5.8 L / 351 )

    1982-1983 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: XLS
    • EngineType: ALL

    2002 DODGE RAM 1500

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • EngineType: ALL
    • SubModel: SLT

    1979 FORD F-250

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 6.6
    • SubModel: CUSTOM
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1980-1981 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: RANGER XLT
    • EngineType: ALL

    2005-2007 FORD F-250 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • SubModel: XL
    • EngineType: ALL

    1997 FORD F-350

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.8
    • SubModel: BASE
    • CUI: 351
    • EngineType: V8 ( 5.8 L / 351 )

    1995-1996 DODGE RAM 2500

    • CC: 5211
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • Liter: 5.2
    • SubModel: BASE
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )
    2520 - Hellwig Load Pro Series Load Leveling Kits is rated 5.0 out of 5 by 1.
    • 2016-12-08T08:42CST
    • bvseo_cps, prod_bvrr, vn_cps_3.4.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_US, sid_10001_10001_1925993, PRD, sort_relevancy
    • clientName_jegs
    Rated 5 out of 5 by from Awsome Product!! I install these springs on my customers trucks and vans and they all love how they perform!!
    Date published: 2016-09-12
    • 2016-12-08T08:42CST
    • bvseo_cps, prod_bvrr, vn_cps_3.4.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_US, sid_10001_10001_1925993, PRD, sort_relevancy
    • clientName_jegs
    Items You Need