Jegs Cyber Week Specials
1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Shop By Vehicle
Shop By
Category
All Categories

Rebates
Gift Certificates
My Account
E-Mail Signup
Catalog Request
Help

Hellwig 2527

LP-25 Progressive Rate Load Leveler Helper Springs

Hellwig 2527

207-2527

made in usa
jegs shipping
FREE Shipping
Ships
Hellwig 2527 LP-25 Progressive Rate Load Leveler Helper Springs $254.99
  • Fits Many Applications
  • 2500 lbs. Capacity
  • 3 Leaf Stack

    See "Fitment" Tab for more info

  • Hellwig 2527 Details

    LP-25 Progressive Rate Load Levelers

  • Mounting Kit Sold Separately
  • Adds New Life To Old Springs
  • Reduces Body Roll
  • Simple Bolt On Installation
  • Variable Rate Leaves Do Not Effect Ride When Unloaded
  • High Quality Spring Steel Leaves
  • Raised Height/Spring Rate Vary On The Adjustment Of Outer Upbolts
  • Limited Lifetime Warranty

  • Specifications:

    Manufacturer's Part Number:
    2527

    The Original Load Levelers

    The Hellwig Load Pro Series LP-25 and LP-35 Helper Spring Kits set the standard for all other aftermarket helper springs and are the true workhorse of the Hellwig Spring line. Manufactured with heat treated ASTM 5160 alloy spring steel these units increase your vehicles level load carrying capacity up to the manufacturer's GVWR (Gross Vehicle Weight Rating). Always operate your vehicle safely and never exceed the recommended GVWR, even when using helper springs. They feature a simple "Set it and forget it " bolt-on design using common hand tools, providing both ease of installation and hassle free use. Made in the USA.

    The Hellwig Load Pro Series Helper Spring Kits are available in both Progressive Spring Rate and Constant Spring Rate designs. The Progressive Rate design requires the truck to be loaded and it's spring compressed to activate the helper spring, therefore as the vehicles load increases the helper spring progressively increases its resistance to the load. The Constant Rate design allows the helper spring to immediately react to the vehicles load, therefore compressing very little as load is applied to the vehicle.

    Designed to be installed on full size pick-up trucks and vans, the Hellwig Load Pro Series LP-25 and LP-35 Helper Spring Kits require mounting hardware to accommodate 2 1/2" or 3" wide leaf springs. When ordering be sure to measure the width of your leaf springs and identify the Load Pro Spring kit to determine the appropriate mounting hardware kit to complete the installation.

    LP-25 Features:
  • Heavy Loads - 3-Leaf Stack
  • 2500 lbs. Level Load Capacity
  • Available in Progressive or Constant Rate
  • Design can handle the load 24/7
  • Mounting kit sold separately

    LP-35 Features:
  • Heaviest Loads - 4-Leaf and Up Stack
  • 3500 lbs. Level Load Capacity
  • Available in Progressive or Constant Rate
  • Offers the Maximum in Carrying Capacity
  • Recommended for 3/4 Ton and 1 Ton Applications
  • Mounting kit sold separately

    Note: Please use the "Filter By Vehicle" selection on the left below to find Hellwig Load Pro Series products for your vehicle.

  • Does Hellwig 2527 fit your vehicle?

    Narrow Results

    2007 GMC SIERRA 2500 HD CLASSIC

    • Fitment_Note: Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: CLASSIC SLE

    2014 RAM 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Springs Or Use 9705 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • SubModel: ST
    • EngineType: ALL

    2011-2012 RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: LARAMIE LONGHORN

    2013 RAM 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: LARAMIE LONGHORN

    2011-2013 RAM 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: ST

    2012 RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 5.7
    • Aspiration: N
    • SubModel: POWER WAGON
    • Engine Vin: T
    • CUI: 345
    • EngineType: V8 ( 5.7 L / 345 )

    2015-2016 RAM 3500

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9705 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: TRADESMAN

    2002 CHEVROLET SILVERADO 1500 HD

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 6.0
    • SubModel: LT
    • CUI: 364
    • EngineType: V8 ( 6.0 L / 364 )

    2015 RAM 3500

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9705 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: BIG HORN

    2015 RAM 3500

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9705 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: LARAMIE LIMITED

    2008 DODGE RAM 1500

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 5.7
    • Aspiration: N
    • SubModel: LARAMIE
    • Engine Vin: 2
    • CUI: 345
    • EngineType: V8 ( 5.7 L / 345 )

    2009-2010 DODGE RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: LARAMIE

    2003 CHEVROLET SILVERADO 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: ALL

    2006-2007 DODGE RAM 1500

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: SPORT

    2006 DODGE RAM 1500

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 5.7
    • Aspiration: N
    • SubModel: LARAMIE
    • Engine Vin: 2
    • CUI: 345
    • EngineType: V8 ( 5.7 L / 345 )

    2003 CHEVROLET SILVERADO 1500 HD

    • CC: 5967
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 6.0
    • SubModel: LT
    • CUI: 364
    • EngineType: V8 ( 6.0 L / 364 )

    2003-2004 DODGE RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 5.9
    • SubModel: ST
    • CUI: 359
    • EngineType: L6 ( 5.9 L / 359 )

    2001 GMC SIERRA 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement
    • EngineType: ALL
    • SubModel: SL

    2001-2002 CHEVROLET SILVERADO 2500

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • EngineType: ALL
    • SubModel: LT

    2003-2004 CHEVROLET SILVERADO 2500

    • Fitment_Note: Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: LT

    2004-2005 CHEVROLET SILVERADO 3500

    • CC: 8128
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 8.1
    • SubModel: BASE
    • CUI: 496
    • EngineType: V8 ( 8.1 L / 496 )

    2009-2010 FORD F-250 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: CABELAS

    2006 DODGE RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: POWER WAGON

    2006 DODGE RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: SPORT

    2015-2016 RAM 3500

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9705 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: LARAMIE LONGHORN

    2011-2012 RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 6.7
    • SubModel: ST
    • CUI: 408
    • EngineType: L6 ( 6.7 L / 408 )

    2007 CHEVROLET SILVERADO 3500 CLASSIC

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: CLASSIC WT

    2004 CHEVROLET SILVERADO 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: WT

    2008-2010 FORD F-250 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • SubModel: KING RANCH
    • EngineType: ALL

    2005-2006 DODGE RAM 1500

    • CC: 8277
    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 8.3
    • SubModel: SRT-10
    • CUI: 505
    • EngineType: V10 ( 8.3 L / 505 )

    2011-2013 RAM 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: LARAMIE

    2003-2008 DODGE RAM 1500

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 5.7
    • SubModel: ST
    • CUI: 345
    • EngineType: V8 ( 5.7 L / 345 )

    2008-2010 FORD F-350 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 6.4
    • SubModel: XL
    • CUI: 391
    • EngineType: V8 ( 6.4 L / 391 )

    2007 DODGE RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: LARAMIE

    2014 RAM 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Springs Or Use 9705 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • SubModel: LARAMIE LIMITED
    • EngineType: ALL

    2007-2010 DODGE RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: POWER WAGON

    2007 GMC SIERRA 3500 CLASSIC

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: CLASSIC WT

    2003-2005 CHEVROLET SILVERADO 2500 HD

    • Fitment_Note: Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 8.1
    • SubModel: LT
    • CUI: 496
    • EngineType: V8 ( 8.1 L / 496 )

    2004 CHEVROLET SILVERADO 2500

    • Fitment_Note: Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: WT

    2008-2010 FORD F-250 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • SubModel: XL
    • EngineType: ALL

    2003-2009 DODGE RAM 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: SLT

    2011-2012 RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 6.7
    • SubModel: SLT
    • CUI: 408
    • EngineType: L6 ( 6.7 L / 408 )

    2008-2010 FORD F-350 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • SubModel: LARIAT
    • EngineType: ALL

    2006-2010 CHEVROLET SILVERADO 2500 HD

    • Fitment_Note: Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: ALL

    2001-2002 CHEVROLET SILVERADO 2500 HD

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: ALL

    2008 DODGE RAM 1500

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 5.7
    • Aspiration: N
    • SubModel: LARAMIE
    • Engine Vin: D
    • CUI: 345
    • EngineType: V8 ( 5.7 L / 345 )

    2008-2010 FORD F-250 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • SubModel: LARIAT
    • EngineType: ALL

    2002 GMC SIERRA 2500 HD

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: ALL

    2007 GMC SIERRA 2500 HD CLASSIC

    • Fitment_Note: Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: CLASSIC SL

    2003 DODGE RAM 2500

    • CC: 7990
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 8.0
    • SubModel: SLT
    • CUI: 488
    • EngineType: V10 ( 8.0 L / 488 )

    2006-2007 DODGE RAM 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: SPORT

    2003-2005 CHEVROLET SILVERADO 2500 HD

    • CC: 6599
    • Fitment_Note: Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 6.6
    • SubModel: LT
    • CUI: 403
    • EngineType: V8 ( 6.6 L / 403 )

    2005 CHEVROLET SILVERADO 1500 HD

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • SubModel: LT
    • EngineType: ALL

    2011 RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 5.7
    • SubModel: ST
    • CUI: 345
    • EngineType: V8 ( 5.7 L / 345 )

    2006-2008 DODGE RAM 1500

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • SubModel: SLT
    • EngineType: ALL

    2007-2008 DODGE RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 6.7
    • SubModel: SLT
    • CUI: 408
    • EngineType: L6 ( 6.7 L / 408 )

    2003 CHEVROLET SILVERADO 2500 HD

    • CC: 5967
    • Fitment_Note: Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 6.0
    • SubModel: WT
    • CUI: 364
    • EngineType: V8 ( 6.0 L / 364 )

    2014 RAM 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Springs Or Use 9705 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • SubModel: LONE STAR
    • EngineType: ALL

    2007-2008 DODGE RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 5.9
    • Aspiration: T
    • SubModel: ST
    • Engine Vin: C
    • CUI: 359
    • EngineType: L6 ( 5.9 L / 359 )

    2005 DODGE RAM 1500

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: LARAMIE

    2010 FORD F-350 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 6.8
    • SubModel: XLT
    • CUI: 415
    • EngineType: V10 ( 6.8 L / 415 )

    2003-2005 DODGE RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 5.7
    • Aspiration: N
    • SubModel: ST
    • Engine Vin: D
    • CUI: 345
    • EngineType: V8 ( 5.7 L / 345 )

    2008 DODGE RAM 1500

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • SubModel: SXT
    • EngineType: ALL

    2003-2009 DODGE RAM 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: ST

    2010 FORD F-350 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 5.4
    • SubModel: XLT
    • CUI: 330
    • EngineType: V8 ( 5.4 L / 330 )

    2010 DODGE RAM 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 6.7
    • SubModel: LARAMIE
    • CUI: 408
    • EngineType: L6 ( 6.7 L / 408 )

    2007 DODGE RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 5.9
    • Aspiration: T
    • SubModel: SLT
    • Engine Vin: C
    • CUI: 359
    • EngineType: L6 ( 5.9 L / 359 )

    2002-2003 CHEVROLET SILVERADO 1500 HD

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • SubModel: LS
    • EngineType: ALL

    2005-2006 DODGE RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: LARAMIE

    2003-2005 CHEVROLET SILVERADO 2500 HD

    • CC: 5967
    • Fitment_Note: Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 6.0
    • SubModel: LT
    • CUI: 364
    • EngineType: V8 ( 6.0 L / 364 )

    2010 DODGE RAM 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 6.7
    • SubModel: ST
    • CUI: 408
    • EngineType: L6 ( 6.7 L / 408 )

    2003-2010 GMC SIERRA 2500 HD

    • Fitment_Note: Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: ALL

    2006 DODGE RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 5.9
    • Aspiration: T
    • SubModel: SLT
    • Engine Vin: C
    • CUI: 359
    • EngineType: L6 ( 5.9 L / 359 )

    2007 DODGE RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: SPORT

    2006 DODGE RAM 1500

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 4.7
    • SubModel: LARAMIE
    • CUI: 285
    • EngineType: V8 ( 4.7 L / 285 )

    2014 RAM 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Springs Or Use 9705 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • SubModel: TRADESMAN
    • EngineType: ALL

    2006 DODGE RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 5.9
    • Aspiration: T
    • SubModel: ST
    • Engine Vin: C
    • CUI: 359
    • EngineType: L6 ( 5.9 L / 359 )

    2013 RAM 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: LONE STAR

    2005-2008 DODGE RAM 1500

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 4.7
    • Aspiration: N
    • SubModel: ST
    • Engine Vin: N
    • CUI: 285
    • EngineType: V8 ( 4.7 L / 285 )

    2004 CHEVROLET SILVERADO 3500

    • CC: 6599
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 403
    • EngineType: V8 ( 6.6 L / 403 )

    2007 CHEVROLET SILVERADO 3500 CLASSIC

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: CLASSIC LS

    2007-2010 DODGE RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 6.7
    • SubModel: ST
    • CUI: 408
    • EngineType: L6 ( 6.7 L / 408 )

    2012 RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 5.7
    • SubModel: ST
    • CUI: 345
    • EngineType: V8 ( 5.7 L / 345 )

    2001 GMC SIERRA 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement
    • EngineType: ALL
    • SubModel: SLE

    2007 DODGE RAM 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: TRX4

    2009-2010 FORD F-350 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • SubModel: CABELAS
    • EngineType: ALL

    2001 GMC SIERRA 2500 HD

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: SLE

    2007 GMC SIERRA 3500 CLASSIC

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: CLASSIC SL

    2001 GMC SIERRA 2500 HD

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: SLT

    2007 GMC SIERRA 3500 CLASSIC

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: CLASSIC SLT

    2015-2016 RAM 3500

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9705 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: LARAMIE

    2005-2006 GMC SIERRA 1500 HD

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • SubModel: ALL
    • EngineType: ALL

    2011 RAM 2500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: POWER WAGON

    2001-2002 CHEVROLET SILVERADO 2500

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
    • EngineType: ALL
    • SubModel: LS

    2003-2005 DODGE RAM 1500

    • Fitment_Note: For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: SLT

    2004-2006 CHEVROLET SILVERADO 3500

    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • EngineType: ALL
    • SubModel: LS

    2004-2005 CHEVROLET SILVERADO 3500

    • CC: 5967
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 6.0
    • SubModel: BASE
    • CUI: 364
    • EngineType: V8 ( 6.0 L / 364 )

    2003 DODGE RAM 2500

    • CC: 7990
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 8.0
    • SubModel: LARAMIE
    • CUI: 488
    • EngineType: V10 ( 8.0 L / 488 )

    2008-2009 FORD F-350 SUPER DUTY

    • Fitment_Note: Must Remove Factory Overload Springs Or Use 9703 Contact Overload Helper~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • SubModel: FX4
    • EngineType: ALL

    2005 CHEVROLET SILVERADO 3500

    • CC: 6599
    • Fitment_Note: Remove Factory Overload Springs/May Require U-Bolt/Center Bolt Replacement~Must Remove Factory Overload Contact Springs/Removal Of Contact Overload~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4830] Spacer For A 4 in. Rear Lift~Use PN[4828] Spacer For A 2 in. Rear Lift And
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 403
    • EngineType: V8 ( 6.6 L / 403 )
    Items You Need