Holley Terminator X Max MPFI Controller Kit [GM LT Gen V Early-Style GDI Engine]
510-550-1620LSD
![Terminator X Max MPFI Controller Kit [GM LT Gen V Early-Style GDI Engine]](http://www.jegs.com/images/photos/500/510/510-550-1620lsd.jpg "Terminator X Max MPFI Controller Kit [GM LT Gen V Early-Style GDI Engine]")
GM LT
Take Control of Gen V LT Swaps with Holley Terminator X!
Designed for those swapping GM's latest small-block V8 engine, the Generation V LT-series packs a lot of cutting-edge technology features into a high-performance package. Loaded with base mapping for popular LT engine combos, Terminator X is compatible with the LT1, L83 5.3L, and L86 6.2L truck engines. Pre-loaded with base mapping for popular engine setups, Terminator X will have your project running in no time!
This controller is engineered for early DI GM LT engines using an LS-style drive-by-wire throttle body.
Features
- Simple Plug-and-Play engine controller for GM Gen V LT series engines with support for Direct Injection (DI) and Variable Valve Timing (VVT)
- Included engine harness will plug directly into the GM LT DI injector sub-harness
- Transmission Control for GM 4L60E and 4L80E automatics
- LCD 3 1/2 inch touchscreen provides easy base tuning with the calibration wizard that is able to show gauge displays and data logging.
- Real-Time Self-Learning fuel maps require no complicated tuning knowledge (Holley EFI software suite is included for advanced users with laptops)
- On-board Multi-Color LED Diagnostic allows quick troubleshooting on critical issues for ECU Power, Engine Running, Wideband Status, TPS Calibration, Crank Signal, Cam Signal, VVT Status, Pump Control, and DI injectors
- Built-in 1bar MAP Sensor with 1/8, 1/4, & 3/16 in. vacuum hose adapters included. For boosted applications, the internal sensor can be disabled to run an external LT style MAP sensor (not included) with the included terminated harness and connector.
- 4 Inputs - 12-volt, Ground, 5-volt, and Frequency can be used for activation triggers, trans brake, and to add extra pressure sensors.
- 4 Outputs - Ground and PWM can be used for electric fans, boost control, nitrous control, idle air control kit, and many more accessories.
- Boost Controls - Ability to control boost vs time, boost vs. gear, boost vs. RPM, boost vs. speed, boost vs. safeties
- Nitrous Controls - Single Channel of Wet or Dry, Progressive or Non-Progressive, rich/lean safeties, and target closed-loop AFR
- Advance Tables - 4x 1D Table, 1x 1D Gear Table, 4x 2D Table, 1x 2D per Gear Table. Can be used for custom tables for flex fuel sensor, fuel pressure safety, or oil pressure safety.
- Bosch LSU 4.9 Wideband for precision reading and tuning control (will not function with LSU 4.2 oxygen sensors)
- Holley EFI Accessories are mostly compatible (analog-style gauges, shift lights, and others.)
Notes:
- To determine if your engine is an early or late model application, examine the fuel pressure sensor behind the intake manifold. If the sensor has a 4-pin connecter it is the early model, if it has a 3-pin connecter it is a late style. An image is shown to help identify which kit you will need.
- Camshafts with oversized fuel pump lobes are NOT supported
Emissions: This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles only.
The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:
- 1965 and older U.S. manufactured California Certified vehicles
- 1967 and older U.S. manufactured Federally Certified vehicles
- 1967 and older Foreign manufactured vehicle
WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
The following vehicles are considered Emissions Controlled Vehicles:
- 1966 and newer U.S. manufactured California Certified vehicles
- 1968 and newer U.S. manufactured Federally Certified vehicles
- 1968 and newer Foreign manufactured vehicle
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.