Items You Need
Ratings |
---|
Price |
Brand |
GM TH700-R4 Lock-Up Style
JEGS 555-60436 XHD Torque Converter Features:
- 1984-1993 cars and trucks
- Not recommended for nitrous or blower applications
- Rated at 600 horsepower
- Dual bolt pattern style for SBP(10.750 in.) or LBP(11.500 in.) flexplates
- Uses 7/16 in. bolts
GM 4L60 with 30-Spline Input Shaft
- 1993-1997 LT1/LT4 and 1997-2004 Corvette C5 LS1
- Does not fit 1998-2002 Camaro/Firebird LS1 or 1999-2007 4.3L/4.8L/6.0L trucks
- Not recommended for nitrous or blower applications
- Rated at 600 horsepower
- Dual bolt pattern style for SBP(10.750 in.) or LBP(11.500 in.) flexplates
- Uses 7/16 in. bolts
Performance Torque Converter General Application Chart * | |||
Advertised Camshaft Duration | Rear Gear Ratio | Engine RPM Range & Compression Ratio | Converter RPM Stall Speeds ** |
Stock to 260° | Stock to 3.23 | 1000-4600 8 to 9.5 | 1500 to 1700 |
Stock to 265° | Stock to 3.23 | 1400-5000 8 to 9.5 | 1600 to 1800 |
265° to 280° | 3.00 to 3.73 | 1600-6000 9.5 to 10.5 | 2200 to 2400 |
280° to 300° | 3.55 to 4.56 | 2000-6500 9.5 to 11 | 3000 to 3400 |
280° to 310° | 3.73 to 4.88 | 2800-7000 10 to 11.5 | 3500 to 3800 |
290°+ | 3.73+ | 3400-8000 10.5 to 12 | 3500+ |
* This chart is a guideline. The stall speed may vary in your application.
** Using the same torque converter, big block applications will usually experience
stall speeds approximately 200 RPM higher than what is shown.
Specifications:
Would this fit my 2015 camaro ss
Do you happen to know the STR on this converter and how “loose” it will feel below stall speed?
Will this be good for my 95 Impala SS with a 383 stroker built 4l60e and 3:73 gears..??
Will this fit my 2002 Silverado with a 4l60e
Will this fit my 2011 dodge challenger srt8
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.