MSD Ignition#121-7740Can-Bus Hub
MSD Ignition 7740 - MSD Power Grid Ignition System Details
This hub will allow users of the Power Grid System Controller to connect other MSD modules to the system for added features. The hub uses CAN-Bus technology that can be stacked so that racers will never run out of spot to plug in modules. Each hub has 4 plug in points with a single output so that one hub can be plugged into another.
To add modules to the system, builders simply plug in the 4-Connector CAN-Bus Hub to the System Controller and then plug the modules into the Hub. The CAN-Bus Hub is required to plug in any modules.
The Power Grid Ignition System is the next evolution of the Programmable 7-Series Ignition Controls. The Grid incorporates an efficient 32 bit microcontroller and an all new software program, called MSD View, and is USB compatible. The Windows based software is designed with tabs to help racers easily select different programming windows and parameters. Also, the data acquisition files of the ignition are now captured on a micro SD card for ease of storage and reviewing.
The Power Grid Ignition incorporates CAN-BUS technology which reduces the amount of wiring and simplifies the addition of accessory modules. The CAN-BUS is a common harness that accessory controls are connected to and easily brought into the programming library of the View Software. With this technology, racers can connect the Power Grid system directly into their Racepak Data Recorder and other Racepak products.
NOTE: To use any modules with the Power Grid System, users MUST plug the modules into a 4-Connector CAN-BUS Hub (# 121-7740) to be attached to the Power Grid System Controller (# 121-7730).
The Power Grid Controller is the brains behind the entire system and can be used with any MSD Ignition or the Pro Mag to provide advance ignition tuning capabilities. While it is compatible with all MSD boxes, the new Power Grid System Controller has been specially designed to mount to the Power Grid Ignition Control box. Also, this new Ignition packs higher output than current programmable units!
The Power Grid Controller is supplied with the View Software, wiring harness, micro-SD card and mounting hardware. The Power Grid Ignition Control Box, available separately, is supplied with the harness and mounting hardware.
Powergrid System Flyer
JEGS EZ Complete Kits are designed by JEGS professionals so you get all the parts you need.