1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Shop By Vehicle
Shop By
Category
All Categories

Rebates
Gift Certificates
My Account
E-Mail Signup
Catalog Request
Help

Magnaflow 51505

OBD-II Universal Catalytic Converter 477 C.I.D./7.8L 13000 lbs. Limit

Magnaflow 51505

642-51505

jegs shipping
FREE Shipping
Ships from Manufacturer
Magnaflow 51505 OBD-II Universal Catalytic Converter 477 C.I.D./7.8L 13000 lbs. Limit $263.58
OBD-II Universal Catalytic Converter
  • 477 C.I.D./7.8L 13000 lbs. Limit
  • Federal Emissions
  • Body Shape: Oval, Center/Center
  • Inlet/Outlet: 2.25"
  • Width: 7"
  • Body Length: 15.5"
  • Overall Length: 19.5"

  • Specifications:

    Inlet Size (in.)
    2.25
    Outlet Size (in.)
    2.25
    Overall Length (in.)
    OEM
    Emission
    Non-California (49-State)
    Converter Body Size
    OEM
    Core Substrate Material
    OEM
    California Air Board Approved
    No
    Main Piping Diameter (in.)
    2.25
    Catalytic Converter Format
    Pre-Catalytic Converter and Main Catalytic Converter
    Oxygen Sensor Location
    N/A
    CAT Converter Air Tube Adapter
    Not Air Tube Kit Adaptable
    Body Size
    OEM
    Substrate Material
    OEM
    Manufacturer's Part Number:
    51505

    Magnaflow OBD-II Universal-Fit Federal Emissions Catalytic Converters are designed for engines built in 1996 or after. Each converter has a ribbed stainless steel body that minimizes expansion and distortion when the converter heats up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gas and they hold the ceramic catalyst in proper alignment. An aluminized or stainless OE-style ribbed heat shield creates a rigid wall of protection against heat and adds to the structural stability of the converter. Magnaflow converters have a 1/2" lap-joint where the necks meet the body. The neck does not extend into the converter body where it could hamper exhaust flow. This is the strongest and smoothest flowing inlet/outlet joint of any manufacturer. A monolithic honeycomb catalyst is utilized. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. Made in the USA.

    Selecting the Proper OBD-II Universal-Fit Catalytic Converter
    Determine engine size and vehicle weight first. Converters are listed according to legal engine size and vehicle weight. Determine the type of converter being replaced. PRE OBD-II converters are for vehicles built before 1996. If the vehicle was built in 1996 or after, an OBD-II converter must be used. If engine has been changed and is not the same model year as the chassis, proceed as follows:

  • If the engine is older than the chassis, select the converter according to the chassis model year.
  • If the engine is newer than the chassis, select the converter according to the engine requirement.

    Check whether the vehicle is Federal or California Emissions. Required by the EPA, this information is on the vehicle emission control information label (example shown below) located in the engine compartment in a visible position on the hood underside, shock tower, radiator support, fan shroud, or firewall.

    Note: Federal emissions 49-state catalytic converters are not legal for sale, installation, or use on licensed vehicles in the state of California.

  • Items You Need