Jegs Free Catalog
1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Free Shipping on Orders Over $95
Shop By Vehicle
Shop By
Category
Close Menu
Top Categories
All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates
Rebates
Help

Magnaflow 94004

Pre OBD-II Universal Catalytic Converter Body Shape: Round, Center/Center

Magnaflow 94004

642-94004

jegs shipping
Ships from Manufacturer
Magnaflow 94004 Pre OBD-II Universal Catalytic Converter Body Shape: Round, Center/Center $77.88
Pre OBD-II Universal Catalytic Converter
  • Body Shape: Round, Center/Center
  • Inlet/Outlet: 2"
  • Width: 6.5"
  • Body Length: 12"
  • Overall Length: 16"

  • Specifications:

    Body Length (in.)
    12
    Overall Length (in.)
    16
    Inlet Size (in.)
    2
    Outlet Size (in.)
    2
    Material
    Stainless Steel
    Emission
    Non-California (49-State)
    Core Substrate Material
    Ceramic
    Outlet Quantity
    1
    California Air Board Approved
    No
    Converter Body Size
    5.5 in. O.D.
    Universal Or Specific Fit
    Universal
    Main Piping Diameter (in.)
    2
    Catalytic Converter Format
    Pre-Catalytic Converter and Main Catalytic Converter
    Oxygen Sensor Location
    N/A
    CAT Converter Air Tube Adapter
    Not Air Tube Kit Adaptable
    AIR Tube
    No
    Body Size
    OEM
    California Legal
    No
    Converter Overall Thickness (in.)
    4
    Converter Overall Width (in.)
    6.5
    Converter Style
    3-way
    GVW (lbs.)
    6,000
    Heat Shield
    Yes
    Inlet Attachment
    Slip fit
    Outlet Attachment
    Slip fit
    Quantity
    Sold individually
    Substrate Material
    Ceramic honeycomb
    Substrate Material
    OEM
    Outlet Quantity
    One
    Case Material
    Stainless steel
    Inlet Diameter (in.)
    2
    Outlet Diameter (in.)
    2
    Inlet Quantity
    One
    Manufacturer's Part Number:
    94004

    For engines built before 1996, these catalytic converters have stainless steel ribbed bodies that minimize expansion/distortion when the converter heats up. The ribs form a channel that protects pads from direct exposure to exhaust gas, plus they keep the ceramic catalyst aligned. Rigid OE-type heat shields add structural stability, and strong 1/2" lap-joints fuse necks to the body (for best flow, necks don't extend into bodies). .


    Choosing the Correct Catalytic Converter
    1.
    Determine engine size and vehicle weight (there are legal limit regulations).

    2. Determine the type of catalytic converter being replaced:
  • Pre OBD-II converters are for vehicles built before 1996.
  • OBD-II converters must be used on vehicles built in 1996-Up.

    3. If the engine has been changed and is not the same model year as the chassis, proceed as follows:
  • For engines older than the chassis, select the converter based on the chassis model year.
  • For engines newer than the chassis, select the converter according to the engine requirement.

    4. It is necessary to know which type of catalytic converter was originally used on the vehicle: 2-Way, 3-Way, or 3-Way + Air. Required by the EPA, this information (abbreviations listed below) is on the vehicle emission control label in the engine compartment. The label should be visible on the firewall, hood's underside, radiator support, fan shroud, or shock tower.
  • 2-Way (Oxidation) = OC or COC
  • 3-Way (Oxidation Reduction) = TWC or ORC
  • 3-Way + Air (3-Way plus Oxidation) = TWC/OC or ORC/OC


    Note: 49-State Catalytic Converters are not legal for sale, installation, or use on licensed vehicles in the state of California.

  • Does Magnaflow 94004 fit your vehicle?

    Narrow Results
    Filter By
    Year
    Filter By
    Make
    Filter By
    Model
    Filter By
    SubModel
    Filter By
    EngineType
    Filter By
    CC
    Filter By
    Liter
    Filter By
    Aspiration

    1979-1980 FORD LTD

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1978-1979 AMERICAN MOTORS CONCORD

    • Fitment_Note: Dual Exhaust~Except Dual Exhaust~Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 304
    • EngineType: V8 ( 5.0 L / 304 )

    1983-1985 PLYMOUTH RELIANT

    • CC: 2555
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.6
    • SubModel: BASE
    • CUI: 156
    • EngineType: L4 ( 2.6 L / 156 )

    1975-1981 FIAT 124

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1975-1977 AMERICAN MOTORS HORNET

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 4.2
    • SubModel: SPORTABOUT
    • CUI: 258
    • EngineType: L6 ( 4.2 L / 258 )

    1993 ASUNA SE

    • Fitment_Note: 12in. Converter Body~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1979 AMERICAN MOTORS PACER

    • Fitment_Note: Dual Converters~Except Dual Converter~Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 5.0
    • SubModel: DL
    • CUI: 304
    • EngineType: V8 ( 5.0 L / 304 )

    1977 AMERICAN MOTORS HORNET

    • Fitment_Note: Dual Converters~Except Dual Converter~Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 5.0
    • SubModel: AMX
    • CUI: 304
    • EngineType: V8 ( 5.0 L / 304 )

    1983-1984 AMERICAN MOTORS EAGLE

    • Fitment_Note: w/o Air Tube~Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.5
    • SubModel: LIMITED
    • CUI: 150
    • EngineType: L4 ( 2.5 L / 150 )

    1983 FORD RANGER

    • Fitment_Note: High Altitude~Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.3
    • SubModel: BASE
    • CUI: 140
    • EngineType: L4 ( 2.3 L / 140 )

    1981-1983 MERCEDES-BENZ 380SEL

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1987 PLYMOUTH VOYAGER

    • CC: 2555
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.6
    • SubModel: LE
    • CUI: 156
    • EngineType: L4 ( 2.6 L / 156 )

    1980 PLYMOUTH CARAVELLE

    • CC: 3687
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.7
    • SubModel: SALON
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1977 DODGE D200 PICKUP

    • CC: 3687
    • Fitment_Note: 12in. Converter Body~Cutting And Welding Required During Installation
    • Liter: 3.7
    • SubModel: BASE
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1982 CHRYSLER LEBARON

    • CC: 2555
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.6
    • SubModel: MEDALLION
    • CUI: 156
    • EngineType: L4 ( 2.6 L / 156 )

    1981-1983 AMERICAN MOTORS EAGLE

    • Fitment_Note: w/o Air Tube~Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.5
    • SubModel: LIMITED
    • CUI: 151
    • EngineType: L4 ( 2.5 L / 151 )

    1975-1976 FORD MUSTANG II

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 5.0
    • SubModel: GHIA
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1983 AMERICAN MOTORS EAGLE

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.5
    • SubModel: SX4
    • CUI: 151
    • EngineType: L4 ( 2.5 L / 151 )

    1986 MERCURY GRAND MARQUIS

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 5.0
    • SubModel: COLONY PARK
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1983 PLYMOUTH TURISMO

    • CC: 1595
    • Fitment_Note: 12in. Converter Body~Cutting And Welding Required During Installation
    • Liter: 1.6
    • SubModel: BASE
    • CUI: 97
    • EngineType: L4 ( 1.6 L / 97 )

    1978-1979 PLYMOUTH HORIZON

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1975-1978 FORD MUSTANG II

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.8
    • SubModel: BASE
    • CUI: 171
    • EngineType: V6 ( 2.8 L / 171 )

    1983-1985 CHRYSLER NEW YORKER

    • CC: 2555
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.6
    • SubModel: BASE
    • CUI: 156
    • EngineType: L4 ( 2.6 L / 156 )

    1982 CHRYSLER NEW YORKER

    • CC: 3687
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.7
    • SubModel: BASE
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1984-1985 PLYMOUTH VOYAGER

    • CC: 2555
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.6
    • SubModel: LE
    • CUI: 156
    • EngineType: L4 ( 2.6 L / 156 )

    1980-1981 CHRYSLER LEBARON

    • CC: 3687
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.7
    • SubModel: MEDALLION
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1976-1977 DODGE D100 PICKUP

    • CC: 3687
    • Fitment_Note: 12in. Converter Body~Cutting And Welding Required During Installation
    • Liter: 3.7
    • SubModel: WARLOCK
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1984-1987 DODGE CARAVAN

    • CC: 2555
    • Fitment_Note: 12in. Converter Body~Cutting And Welding Required During Installation
    • Liter: 2.6
    • SubModel: BASE
    • CUI: 156
    • EngineType: L4 ( 2.6 L / 156 )

    1984-1985 CHEVROLET CITATION II

    • CC: 2474
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.5
    • SubModel: BASE
    • CUI: 151
    • EngineType: L4 ( 2.5 L / 151 )

    1975-1980 FORD GRANADA

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1987 PLYMOUTH VOYAGER

    • CC: 2555
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.6
    • SubModel: BASE
    • CUI: 156
    • EngineType: L4 ( 2.6 L / 156 )

    1995 LAND ROVER RANGE ROVER

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: COUNTY CLASSIC

    1979 MAZDA GLC

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: DX

    1975-1976 AMERICAN MOTORS PACER

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1986 PLYMOUTH VOYAGER

    • CC: 2555
    • Fitment_Note: 12in. Converter Body~Cutting And Welding Required During Installation
    • Liter: 2.6
    • SubModel: BASE
    • CUI: 156
    • EngineType: L4 ( 2.6 L / 156 )

    1986 NISSAN SENTRA

    • CC: 1597
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.6
    • SubModel: DX
    • CUI: 97
    • EngineType: L4 ( 1.6 L / 97 )

    1980-1981 CHRYSLER LEBARON

    • CC: 3687
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.7
    • SubModel: BASE
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1985-1986 JEEP CHEROKEE (XJ)

    • Fitment_Note: 12in. Converter Body~Cutting And Welding Required During Installation
    • Liter: 2.8
    • SubModel: CHIEF
    • CUI: 173
    • EngineType: V6 ( 2.8 L / 173 )

    1975 PLYMOUTH VALIANT

    • CC: 3687
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.7
    • SubModel: BASE
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1985-1986 WINNEBAGO MOTORHOME

    • Fitment_Note: 12in. Converter Body~Cutting And Welding Required During Installation
    • Liter: 2.2
    • SubModel: LE SHARO/PHASAR
    • CUI: 134
    • EngineType: L4 ( 2.2 L / 134 )

    1976 DODGE CHARGER

    • CC: 3687
    • Fitment_Note: 12in. Converter Body~Cutting And Welding Required During Installation
    • Liter: 3.7
    • SubModel: BASE
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1981-1984 DODGE ARIES

    • CC: 2555
    • Fitment_Note: 12in. Converter Body~Cutting And Welding Required During Installation
    • Liter: 2.6
    • SubModel: CUSTOM
    • CUI: 156
    • EngineType: L4 ( 2.6 L / 156 )

    1978 MAZDA GLC

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1995 BMW 318TI

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1975-1978 FIAT 131

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1983 PLYMOUTH HORIZON

    • CC: 1595
    • Fitment_Note: 12in. Converter Body~Cutting And Welding Required During Installation
    • Liter: 1.6
    • SubModel: BASE
    • CUI: 97
    • EngineType: L4 ( 1.6 L / 97 )

    1983-1984 FORD RANGER

    • Fitment_Note: High Altitude~Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.3
    • SubModel: XLT
    • CUI: 140
    • EngineType: L4 ( 2.3 L / 140 )

    1995 LAND ROVER RANGE ROVER

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: COUNTY LWB

    1975-1976 DODGE CORONET

    • CC: 3687
    • Fitment_Note: 12in. Converter Body~Cutting And Welding Required During Installation
    • Liter: 3.7
    • SubModel: BASE
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1979 CHRYSLER NEWPORT

    • CC: 3687
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.7
    • SubModel: BASE
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1976 PLYMOUTH VALIANT

    • CC: 3687
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.7
    • SubModel: BASE
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1987-1991 MERCURY COLONY PARK

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • SubModel: GS
    • EngineType: ALL

    1987-1994 MERCURY GRAND MARQUIS

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: LS

    1977-1979 FORD PINTO

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1979 AMERICAN MOTORS CONCORD

    • Fitment_Note: Dual Exhaust~Except Dual Exhaust~Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 5.0
    • SubModel: LIMITED
    • CUI: 304
    • EngineType: V8 ( 5.0 L / 304 )

    1978 AMERICAN MOTORS PACER

    • CC: 3802
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.8
    • SubModel: BASE
    • CUI: 232
    • EngineType: L6 ( 3.8 L / 232 )

    1975-1979 FIAT 128

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1980 MAZDA GLC

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: CUSTOM

    1984-1985 MERCEDES-BENZ 380SE

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1983 MERCURY MARQUIS

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.3
    • SubModel: BROUGHAM
    • CUI: 200
    • EngineType: L6 ( 3.3 L / 200 )

    1975-1977 FORD MAVERICK

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 4.1
    • SubModel: BASE
    • CUI: 250
    • EngineType: L6 ( 4.1 L / 250 )

    1982 FORD MUSTANG

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.3
    • SubModel: L
    • CUI: 200
    • EngineType: L6 ( 3.3 L / 200 )

    1985-1987 SUBARU BRAT

    • Fitment_Note: Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1982 FORD GRANADA

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.3
    • SubModel: GLX
    • CUI: 140
    • EngineType: L4 ( 2.3 L / 140 )

    1979 LANCIA ZAGATO

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1983 MERCURY ZEPHYR

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.3
    • SubModel: Z7 GS
    • CUI: 200
    • EngineType: L6 ( 3.3 L / 200 )

    1993 LAND ROVER DEFENDER 110

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1978 FORD FAIRMONT

    • CC: 4950
    • Fitment_Note: With 14 in. Converter Body~Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 5.0
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: F
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1985 DODGE 600

    • CC: 2555
    • Fitment_Note: 12in. Converter Body~Cutting And Welding Required During Installation
    • Liter: 2.6
    • SubModel: SE
    • CUI: 156
    • EngineType: L4 ( 2.6 L / 156 )

    1976-1978 FORD F-250

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1978-1979 FORD FAIRMONT

    • Fitment_Note: With 14 in. Converter Body~Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 5.0
    • SubModel: FUTURA
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1987-1991 FORD COUNTRY SQUIRE

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1981-1982 FORD GRANADA

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.3
    • SubModel: GLX
    • CUI: 200
    • EngineType: L6 ( 3.3 L / 200 )

    1975-1977 DODGE D100 PICKUP

    • CC: 3687
    • Fitment_Note: 12in. Converter Body~Cutting And Welding Required During Installation
    • Liter: 3.7
    • SubModel: CUSTOM
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1991-1995 BMW 318IS

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1993-1994 TOYOTA LAND CRUISER

    • Fitment_Note: 12in. Converter Body~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1980 FORD FAIRMONT

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 4.2
    • SubModel: FUTURA
    • CUI: 255
    • EngineType: V8 ( 4.2 L / 255 )

    1981-1982 FORD GRANADA

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.3
    • SubModel: GL
    • CUI: 200
    • EngineType: L6 ( 3.3 L / 200 )

    1980 PLYMOUTH GRAN FURY

    • CC: 3687
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.7
    • SubModel: SALON
    • CUI: 225
    • EngineType: L6 ( 3.7 L / 225 )

    1984-1987 DODGE CARAVAN

    • CC: 2555
    • Fitment_Note: 12in. Converter Body~Cutting And Welding Required During Installation
    • Liter: 2.6
    • SubModel: LE
    • CUI: 156
    • EngineType: L4 ( 2.6 L / 156 )

    1979 AMERICAN MOTORS PACER

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 4.2
    • SubModel: LIMITED
    • CUI: 258
    • EngineType: L6 ( 4.2 L / 258 )

    1975-1977 AMERICAN MOTORS HORNET

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 4.2
    • SubModel: BASE
    • CUI: 258
    • EngineType: L6 ( 4.2 L / 258 )

    1986 JEEP COMANCHE

    • Fitment_Note: 12in. Converter Body~Cutting And Welding Required During Installation
    • Liter: 2.8
    • SubModel: CUSTOM
    • CUI: 173
    • EngineType: V6 ( 2.8 L / 173 )

    1986 MERCURY GRAND MARQUIS

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 5.0
    • SubModel: COLONY PARK
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1980 OLDSMOBILE OMEGA

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1983-1985 NISSAN SENTRA

    • CC: 1597
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.6
    • SubModel: DX
    • EngineType: L4 ( 1.6 L / 1597 CC )

    1985-1986 NISSAN PULSAR NX

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1978-1979 MERCURY ZEPHYR

    • Fitment_Note: With 14 in. Converter Body~Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 5.0
    • SubModel: Z7
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1994-1995 LAND ROVER DISCOVERY

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1980 BUICK SKYLARK

    • CC: 2474
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.5
    • SubModel: BASE
    • CUI: 151
    • EngineType: L4 ( 2.5 L / 151 )

    1981-1982 MERCURY COUGAR

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.3
    • SubModel: BASE
    • CUI: 200
    • EngineType: L6 ( 3.3 L / 200 )

    1977 LINCOLN VERSAILLES

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1982 FORD GRANADA

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.3
    • SubModel: L
    • CUI: 140
    • EngineType: L4 ( 2.3 L / 140 )

    1982-1983 DODGE 400

    • CC: 2555
    • Fitment_Note: 12in. Converter Body~Cutting And Welding Required During Installation
    • Liter: 2.6
    • SubModel: BASE
    • CUI: 156
    • EngineType: L4 ( 2.6 L / 156 )

    1983 MERCURY MARQUIS

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.3
    • SubModel: BASE
    • CUI: 140
    • EngineType: L4 ( 2.3 L / 140 )

    1981-1982 FORD COURIER

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1980-1982 FORD FAIRMONT

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 3.3
    • SubModel: BASE
    • CUI: 200
    • EngineType: L6 ( 3.3 L / 200 )

    1983 DODGE OMNI

    • CC: 1595
    • Fitment_Note: 12in. Converter Body~Cutting And Welding Required During Installation
    • Liter: 1.6
    • SubModel: CUSTOM
    • CUI: 97
    • EngineType: L4 ( 1.6 L / 97 )

    1986-1989 SUBARU RX

    • Fitment_Note: Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: TURBO

    1975-1978 FORD MUSTANG II

    • CC: 4950
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 5.0
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: F
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )
    Items You Need