Moroso 23997 - Moroso Heating Pads

Moroso#710-23997

External Heating Pad

Dimensions: 2" x 15"

Self Adhesive Attachment

150 Watts

110 Volt Cord

View In Catalog
Accessories
Similar Items

Installation Instructions for Moroso 23997 - Moroso Heating Pads

Complete list of Moroso Heating Pads

Details
Overview
Accessories
Similar Items

Moroso 23997 - Moroso Heating Pads Details

Self Adhesive Style Heating Pads

New and improved lamination process, this is excellent for pre-heating of oil pans, tanks and automatic transmission pans. Pad is secured to unit by self-adhesive attachment. The etched foil design distributes heat evenly. Superior grade silicone outer shell resist oil and dirt. Perfect for slender areas of oil pans/dry sump tanks. Has 150 watts of power.

These external heating pads are excellent for pre-heating oil pans, tanks and automatic transmission pans. Available in a hook/spring attachment style or self adhesive design. The superior grade silicone outer shell resists oil and dirt.

Installing Self-Adhesive Heating Pads
Moroso Self-Adhesive Heating Pads come in two different sizes, making them convenient to use on dry sump tanks or oil pans to pre-heat oil prior to racing. A few installation tips will insure maximum heat transfer and years of dependable service.

1) Mark the location that the pad will be applied to, and prepare the surface so it's free from paint, grease, oil and large dents.

2) Before applying the pad, decide where you want the power cord to go. Remove the protective backing from the pad and avoid touching the adhesive surface.

3) Begin with the side opposite the power cord, applying pressure with your hand while forming it to the surface. Press the pad into any surface impressions as you go. If wrinkles occur, press them out as flat as possible.

4) Apply a high-temperature silicone sealant/adhesive around the entire perimeter of the pad.

5) Allow the sealant/adhesive to cure per manufactures instructions before using the heater.

6) Circulating oil through the system while using the heater speeds the heating process.