1978-88 Malibu / Monte Carlo / Cutlass Steering System
Features:
- Taller upper ball joints to increase camber gain.
- Integrates with OEM spindles.
- Centers the wheels in the wheel well with increased caster settings.
- Optimizes bumpsteer to under .065" through 5" of suspension travel.
- Includes upper and lower StrongArms, outer tie rods, and billet tie rod adjusters.
Frequently Asked Questions:
Do I have to modify my oem subframe?
No modifications are necessary at all.
Can I use my existing OEM spindles with this system?
Yes, the G-Body Tru Turn package was specifically designed to work with the OEM spindle
What is "bumpsteer" and why should I be concerned about it?
Bumpsteer is a term that refers to the control arms and the steering linkage moving in different arcs as the suspension moves through its travel. When this happens the tierods will move the steering arms (and therefore the wheels) in directions that the driver does not intend. This leads to an "uneasy" feeling car. Some OEM cars (especially older musclecars) can have a lot of bumpsteer...as much as 1"! Imagine the toe setting on your car changing unpredictably as you go down the road! The Tru Turn system nearly eliminates this situation...the bumpsteer is under .065" through 5" of suspension travel. This leads to a very stable and comfortable feeling vehicle.
What is camber gain and why should I be concerned about it?
Camber gain refers to the rate of camber change the spindle will see through the range of suspension travel. With most OEM cars (especially older musclecars), the OEM suspension geometry will lean the compressed wheel OUT when turning. With the TruTurn suspension the compressed wheel will lean INTO the turn, keeping the tire squarely on the ground thereby offering more lateral grip AND offering a more stable turning experience.
Specifications:
Can these be used with coil over shocks?
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.