Free Shipping & Handling on Orders Over $95 - Order by 11pm EST for Same-Day Shipping!
Shop By Vehicle
Shop By
All Categories

Gift Certificates
My Account
E-Mail Signup
Catalog Request

Ridetech 19011499

Mustang II Street Rod Front StrongArms Lower Control Arms

Ridetech 19011499

Part Number: 029-19011499

Mustang II Street Rod Front StrongArms
  • Lower Control Arms
  • For use with CoolRide
  • $500.00
    Ships 10/26/16
    if Ordered Today
    FREE Shipping
    Ridetech 19011499 Mustang II Street Rod Front StrongArms Lower Control Arms $500.00

    Ridetech 19011499 Details

    Front Strong Arms

    This is where ''Air Ride Technology'' begins and is still a valuable solution for many applications. The CoolRide system replaces the traditional coil-spring and shock with an air spring and shock as separate units. CoolRide systems are engineered to perform and come with all hardware and brackets. The CoolRide system will raise and lower the vehicle, improving the handling and offering a terrific ride.

  • Lowers vehicle ride height
  • Improves handling
  • Improves ride quality
  • Pre-engineered mounting hardware to maintain ground clearance, driveline angles, tire clearance and load capacities
  • CoolRide Airsprings
    - for StrongArms
    Black Series Shocks is a great entry level solution. With Fixed shock valving, the black series is designed to optimize ride quality.

    The OEM quality of the twin tube steel body shock will last for years of reliable service.

  • Fixed shock valving is designed to optimize ride quality
  • OEM quality twin tube steel body shock for years of reliable service
  • A great option for increasing ride quality and performance on a budget
  • Steel body / twin-tube design - optimized for ride quality
  • High quality bearing mounts and stud style mounts for years of service
  • Black Series Shocks029-19010600
    Master Series Shocks features single and double adjustable billet aluminum shocks are the ultimate upgrade to optimize the ride quality and handling performance of your suspension. These shocks have a soft compression valving and a 16 position adjustable rebound valving to let you tune the shock to your particular car!

    The single adjustable shock has a single knob that adjusts the rebound valving only. The double adjustable shock has two knobs that adjust rebound AND compression valving separately. Features: 5/8'' hard chrome piston rod and the latest internal sealing technology to ensure top performance and long life.

  • Completely redesigned internal design
  • Aluminum construction
  • Single or double adjustable shock valving
  • Available in a wide range of stroke lengths, and mounting styles to fit large variety of applications
  • Aluminum body / twin-tube design with adjustable valving
  • Easy & precise valve adjustment
  • Master Series Shocks
    - Single Adjustable
    Select Series Shocks is a steel body monotube damper with TWO sets of independent internal valving so you can choose between ''cruise-mode'' with a soft compliant ride or a firmer ''sport mode'' for handling performance... all at the touch of a switch!

    With the new Select Series damper, RideTech is now the ONLY manufacturer able to bring this new electronically selectable valve technology to the Hot Rod and trailer towing market.

    Select Series features:
  • Proven reliable OEM electronic damping technology
  • Steel monotube construction allows superior oil control
  • Durability proven to over 100,000 miles
  • Instant response to valving changes (under 1 second)
  • Perfect for vehicles with radically changing loads.
  • Select Series Shocks
    - Electronic Adjustable


    Manufacturer's Part Number:

    All STRONGARMS include ball joints, and bushings.
    They are bolt-on: ready to install!

    What says ''performance'' more than a set of tubular control arms! After all of the time and effort expended on your ride, you definitely can't let your stamped oem control arms detract from all that work. Finish your suspension off with these new tubular control arm systems from Ridetech. Built with all of the care and experience you have come to expect from Ridetech, these tubular control arms are a precision engineered solution for ShockWave, CoolRide or CoilOver installation, ball joint binding, and frame clearance issues that can haunt some vehicles. When you combine the performance benefits with the elegant design of these arms, there is no question.... You want these!

    1966 Chevelle equipped with Ridetech StrongArms, front & rear

    Development - StrongArms are developed by Ridetech in Jasper, Indiana on an actual running, driving vehicle. This allows them to properly address ALL fitment and performance issues. It also allows them to document an installation, demonstrate the installation to their sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms

    Design - We think the best way to design any component is to keep it simple. That is why Strong Arms are designed with as few components as possible. Ridetech has a new 4 axis tubing bender that allows precise, repeatable bends that no other machine can achieve. This machine allows them to create elegant tubing bends that would otherwise require several separate welded components.

    Components - Ridetech has worked closely with Moog, a major manufacturer of OEM ball joints, to ensure that the proper ball joints have been selected for the Application... a compression style unit in a compression application, a tension ball joint in a tension application. Proper poly or rubber bushings are selected based on application and the type of driving or racing that is anticipated.

    Geometry of a suspension starts with the position of the frame mounts and the height of the spindle, not the shape of the control arm. However, there are a few small things in control arm design that can make a big difference in how a vehicle drives and performs.
  • StrongArms create extra caster potential by adjusting the fore and aft position of the ball joints. At the same time they make sure the wheel is properly positioned in the wheel-well so your new 18'' wheels fit like they should!
  • The balljoint camber travel is re-centered to accommodate the new lowered ride height so the ball joint doesn't bind during extreme suspension movement.
  • The perimeter of the StrongArms is contoured to allow maximum wheel clearance and turning radius.
  • All shock mounts, airspring mounts, and swaybar mounts are integrated into the design so you don't have to finish the engineering in order to enjoy your ride!
  • StrongArms are optimized to allow proper camber adjustment at your new lowered ride height without using a large stack of shims.

    RideTech has designed your new StrongArms to fit a variety of RideTech shock and spring solutions. There are two inital choices for you: air or coil springs. The correct shocks/springs are listed under the "More info..." link for your particular application. If you are looking for an adjustable air solution, you will want to add ShockWaves to your AirBar. If your looking for the simplicty of a coil-over...we have that for you too!
    Typical CoolRide & StrongArms Set-up
    Shocks sold separately on CoolRide Kits
    Typical ShockWave/CoilOver & StrongArms Set-up

  • Items You Need