Free Shipping & Handling on Orders Over $95 - Order by 11pm EST for Same-Day Shipping!
0
My Cart
$0.00
Shop By
Category
All Categories

Rebates
Gift Certificates
My Account
Help

Wilwood 140-8314-D

Rear Brake Rotor Upgrade Kit 1988-96 Chevrolet Corvette



Wilwood 140-8314-D

Part Number: 950-140-8314-D

Rear Brake Rotor Upgrade Kit
  • 1988-96 Chevrolet Corvette
  • 12'' Diameter Rotors
  • SRP Rotors
  • $548.69
    Ships 11/08/16
    if Ordered Today
    Made In USA
    FREE Shipping
    Wilwood 140-8314-D Rear Brake Rotor Upgrade Kit 1988-96 Chevrolet Corvette $548.69

    Wilwood 140-8314-D Details

    Rear Brake Rotor Upgrade Kits

    Fits:

  • Chevrolet Corvette 1988-1996 C-4 w/ HD Brake Option 13'' Rotor
  • Chevrolet Corvette 1988-1996 C-4 w/ STD Brake Option 12'' Rotor

  • Specifications:

    Position
    at Rear Axle
    Brake Pad Construction
    Integrally molded without shims
    Brake Pad Material
    Semi-metallic
    Brake Rotor and Pad Location
    Rear
    Electronic Wear Sensor
    No
    For Use with Stock Calipers
    Yes
    Friction Material Type
    ProMatrix
    Intended for Street Use
    Yes
    Quantity
    Sold as a kit
    Rear Rotor Outside Diameter (in.)
    12
    Rear Rotor Thickness (in.)
    0.81
    Rotor Finish
    Black E-coat
    Rotor Material
    Iron
    Rotor Style
    Cross-drilled and slotted surface
    Manufacturer's Part Number:
    140-8314-D

    A Simple, Bolt-On Brake Upgrade!

    ProMatrix Brake Pad and Rotor Upgrade Kits offer measurable brake performance improvements to racers and enthusiasts using the OE factory brake calipers. High-performance pad compounds are specially selected to provide increased brake response and higher resistance against fade. A choice of either two-piece directional vane GT Curved Vane rotors that provide high-temperature durability for the track or SRP Drilled and Slotted black e-coat rotors that provide high-tech style with corrosion resistance for the street. Wilwood Promatrix pads feature specially selected compounds for enhanced performance through increased friction properties and extended temperature range. ProMatrix compound pads are proving to be the most versatile dual-sport compound with medium friction, moderate temperature range, smooth but aggressive initial response, and low wear rate. These pads offer clean and comfortable responsive driving on the street with enough friction and fade resistance for high-level autocross and high-performance driving.

    GT Curved Vane Rotors are built for the extreme conditions of professional motorsports. The superior heat absorption and dissipation characteristics of these heavy wall directional vane rotors are the keys to preventing heat fade and realizing long service life from rotors and pads. All rotors are cast from premium grade, long grain carbon iron for long wear, thermal stability, and distortion resistance. Every GT Rotor is detail machined to eliminate stress points and unnecessary weight away from the pad sweep face. The faces and OD are precision turned to less than .001'' for flatness, parallelism, and run-out. An asymmetrical face slot pattern provides smoother engagement through reduced harmonics and improved thermal balance between the ID and OD of the rotor. Every rotor is then individually dynamic balanced to provide vibration-free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking on short tracks and road course competition.

    SRP Drilled Performance Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The venting and cleaning action of the holes and slots will reduce pad glaze and disperse gases and heat generated during the pad-to-rotor interface. The holes and slots also inhibit irregular pad compound build-up on the rotor faces resulting in smoother engagement and improved pedal response in all conditions. The material removed also contributes to lower rotating and unsprung suspension weight. Along with the excellent performance characteristics of this rotor design, each rotor is coated black. The high-tech design, classic style, and aesthetic appeal of the SRP Series are perfect finishing touches to any wheel and tire detail.

    NOTE: These Brake Rotor Upgrade Kits DO NOT include brake lines. Wilwood's website and installation instructions have NOT been updated to reflect the changes that Wilwood has made to NOT include brake lines in these kits any further.


    GT Curved Vane Rotor

    SRP Drilled & Slotted Rotor

    Does Wilwood 140-8314-D fit your vehicle?

    Narrow Results

    1988-1990 CHEVROLET CORVETTE

    • EngineType: ALL
    • SubModel: ALL

    1992-1996 CHEVROLET CORVETTE

    • Liter: 5.7
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: P
    • CUI: 350
    • EngineType: V8

    1991-1995 CHEVROLET CORVETTE

    • EngineType: ALL
    • SubModel: ZR-1

    1996 CHEVROLET CORVETTE

    • Liter: 5.7
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: 5
    • CUI: 350
    • EngineType: V8

    1991 CHEVROLET CORVETTE

    • Liter: 5.7
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: 8
    • CUI: 350
    • EngineType: V8

    1996 CHEVROLET CORVETTE

    • EngineType: ALL
    • SubModel: COLLECTOR'S EDITION

    1996 CHEVROLET CORVETTE

    • EngineType: ALL
    • SubModel: GRAND SPORT

    1993 CHEVROLET CORVETTE

    • EngineType: ALL
    • SubModel: 40TH ANNIVERSARY EDITION

    1995 CHEVROLET CORVETTE

    • EngineType: ALL
    • SubModel: INDIANAPOLIS 500 PACE CAR
    Items You Need