FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Chevrolet Performance LC9 5.3L / 326HP Connect & Cruise Powertrain System


Chevrolet Performance
Chevrolet Performance LC9 5.3L / 326HP Connect & Cruise Powertrain System

Product images may differ from actual product appearance.

Power your project with the next level of crate-engine convenience, assurance and value!

Free Shipping!

When it comes to performance innovations that save time, money and guesswork, Chevrolet Performance once again leads the way!

Chevrolet Performance pioneered the concept of crate engines more than four decades ago, and continues to lead the industry with our unprecedented Connect & Cruise crate powertrain systems - factory-engineered engine and transmission combinations that include all the electronic control modules, wiring harnesses and other key components.
Three Connect & Cruise systems are offered, including the all-new 5.3L/4L65-E kit, with 320 horsepower, the Corvette-derived 430-hp LS3 paired with a 4L65-E four-speed transmission, or the 556-hp supercharged LSA engine, which is matched with the 4L85-E transmission (*4L85-E is reman in 2013)
Chevrolet Performance engineers matched the engines and transmissions for optimal performance and durability, so you can wring out every horsepower from them with total confidence! The specially calibrated controllers are designed for retrofit installations in older vehicles, for easier and quicker installation and operation without the need for third-party tuning.
The convenience of a crate engine, the assurance of factory validate performance and the value of an inclusive package - that's what you get with Chevrolet Performance's Connect & Cruise crate powertrain systems.
Each kit delivers a brand-new, fully assembled crate engine, a brand-new or remanufactured electronically controlled overdrive transmission, electronic control modules for both, and the engine control hardware to get it all running in your project vehicle - including the mass airflow sensor, oxygen sensors and even the special throttle pedal for the engines' electronic throttle bodies.
Chevrolet Performance engineers matched the engines with their respective transmissions, ensuring they are up to the task of channeling big power with absolute dependability. The engine controller is specially calibrated to run the engine without some of the production-vehicle features that aren't required in an older vehicle. That means no ''trouble'' codes and no need for third-party tuning. Better still, the systems' unique SuperMatic transmission controllers are designed to work with the engine controllers for a seamless, ''plug and play'' installation that is quick, easy and intuitive. Detailed instructions outline all the necessary steps.
The engineers did all the hard work of designing and calibrating perfectly matched powertrain systems - and they covered them with a 24-month/50,000-mile limited warranty.

All you have to do is install them and start cruising!

LC9 327ci Engine
The 5.3L engine shares the same displacement as the original 327-cubic-inch Small-Block of the 1960s, making it a great choice for customers who want a 21st-century edition of the 327 for a resto-mod vintage Chevy II or mid-year Corvette. It is rated at 320 horsepower, and because the 5.3L engine was originally engineered for truck applications, it offers a broad, flat torque curve that's ideal for giving older trucks and full-size hot rods an excellent feeling of low-end performance. It makes 300 lb.-ft. by only 2,000 rpm and holds above that level all the way to 5,500 rpm. It peaks at 4,400 rpm with 335 lb.-ft.

2WD KIT - Hydra-Matic 4L65-E Four-Speed Automatic Transmission (LS-Series V-8)
  • Similar in design to the 4L60-E
  • Electronically controlled four-speed overdrive transmission
  • Features five-pinion gearsets, heat-treated stator shaft splines, induction-hardened turbine shaft, seven-plate 3.4 clutch
  • Gear ratios: 1st: 3.06, 2nd: 1.62, 3rd: 1.00, 4th: 0.70
  • Add up to 430 lbs/ft. torque

    4WD KIT - SuperMatic 4L70-E Four-Speed Automatic Transmission
  • Based on the 4L60-E/4L65-E
  • Increased horsepower and torque capacity
  • Features five-pinion gearsets, heat-treated stator shaft splines, induction-hardened turbine shaft, seven-plate clutch and specific valve-body calibration
  • Gear ratios: 1st: 3.06, 2nd: 1.62, 3rd: 1.00, 4th: 0.70
  • Add up to 495 lbs/ft. torque

    Engine Control Modules and Harnesses
    A precisely calibrated engine control module is essential to making your fuel-injected LS engine perform in your older vehicle - and Chevrolet Performance is your source for controllers that are designed for easy, ''plug-and-play'' installation and, in most applications, no need for third-party tuning adjustments.
    Unlike production controllers that may or may not come with a used engine, these controllers are calibrated for installation in older vehicles. That means many of the features required for late-model production vehicles are ''turned off,'' because they're not required in older cars and trucks. That means features that may trigger a diagnostic trouble code and possibly affect performance - requiring additional tuning - are not enabled.
    These inclusive kits deliver all the components required to plug into the engine and get it running - from the controller itself and the accompanying wire harness to the mass airflow sensor, oxygen sensors and even a throttle pedal assembly for engines equipped with an electronic throttle body. The kits also include detailed instructions to help you do it right the first time, even if you have no experience.

    Most Engine Control Modules Kits Include:
  • Two oxygen sensors
  • Two oxygen sensor mounting bosses (for installation in the exhaust system)
  • A mass airflow meter
  • A mass airflow meter mounting boss (for installation in the air intake system)
  • A throttle pedal assembly (for use with the electronically operated throttle)
  • A specific oil pressure sensor that is compatible with the harness (when needed)
  • A complete wiring harness with fuse box and necessary cam sensor and MAP sensor jumpers
  • The programmed controller
  • An instruction sheet

    Each Chevrolet Performance controller kit is a true stand-alone system. All that's needed to get a vehicle running with it are power and ground sources, a high-pressure fuel pump and an electric cooling fan.

    Each Crate Powertrain System Includes:
  • Brand-new, fully assembled crate engine
  • Brand-new transmission*
  • SuperMatic transmission control module
  • Calibrated engine control module
  • Two oxygen sensors and mounting bosses (for installation in the exhaust system)
  • Mass airflow meter and mounting boss (for installation in the air intake system)
  • Throttle pedal assembly (for use with the electronically operated throttle)
  • Assembled wiring harness with fuse box and necessary cam sensor and MAP sensor jumpers
  • Oil pressure sensor that is compatible with the harness
  • Instruction sheet


  • 2 Products

    809-CPSLC94L65E
    LC9 5.3L 327ci Connect & Cruise Powertrain System
  • 326 HP at 5400 RPM
  • 335 ft/lbs TQ at 4400 RPM
  • 2WD Kit Hydra-Matic 4L65-E Four Speed Transmission
  • $10,230.94
    Order Today Ships 08/07/14

    809-CPSLC94L70E
    LC9 5.3L 327ci Connect & Cruise Powertrain System
  • 326 HP at 5400 RPM
  • 350 ft/lbs TQ at 4400 RPM
  • 4WD Kit SuperMatic 4L70-E Four Speed Transmission
  • $10,891.94
    Order Today Ships 08/07/14

    2 Products