Gibson Super Truck Aluminized Cat-Back Exhaust Systems

Product images may differ from actual product appearance.

More Power Where You Need It Most!

Gibson cat-back exhaust systems deliver more power from 2000 - 4000 RPM than other exhaust systems. Other systems claim more power, but in the 5000 - 6000 RPM range, which is never used by street driven vehicles. Gibson performance exhaust systems improve exhaust flow and create more power where you need it! Turbulence exists at every point the exhaust gas ''pulse'' enters or exits an exhaust component. Gibson reduces turbulence to the absolute minimum in two ways. The first is with it's patented Superflow™ design, which assists the exhaust gas in its flow out of the system. The second, and most important in the reduction of turbulence, is the ''slip fit'' joining of all components. Each pipe fits into the larger opening of the next down stream exhaust pipe. This method contributes little turbulence when compared to ''ball-and-socket'' or ''flange-and-gasket'' joining, which can create substantial power robbing backpressure and turbulence at each component joint. Or worse, a misaligned gasket or socket can actually create more backpressure than your current stock system!

The split rear system and the dual sport system will be about 5-8 decibels louder than a stock system. The quietest system is the single swept side system. It produces a nice deep throaty sound outside, and is just slightly above stock in the cab. All Gibson exhaust systems are made with mandrel bent tubing for the least restriction possible. Not only does this reduce restriction, but creates a consistent flow throughout the system. The Superflow™ mufflers use a baffled and chambered dynamic structure which delivers dramatically higher exhaust flow when compared to a packed or screened muffler.

Too large a pipe without the proper muffler will reduce low end torque but increase top end power. Gibson does not build their exhaust kits to flow as much as possible, but as efficiently as possible. That's why the right choice is Gibson exhaust!

Super Truck Exhaust (Most Aggressive) Designed for the race enthusiast to give you the deep powerful race truck rumble with impressive acceleration and increased horsepower gains. Designed for hassle free, bolt-on installation. Typical dyno tested horsepower gains average are 10-15 and 15-20lb-ft of increased torque. Fuel economy may improve as your engine becomes more fuel efficient.. Not recommended for heavy duty towing. Noise level may exceed 95-decibel standard.