JKS Manufacturing Track Bar Relocation Brackets - JEGS

JKS Manufacturing Track Bar Relocation Brackets


JKS Manufacturing
JKS Manufacturing Track Bar Relocation Brackets

Product images may differ from actual product appearance.

Track Bar Relocation Brackets from JKS Manufacturing permanently correct geometry of the rear track bar following the installation of a CV-type driveshaft. The bolt-on bracket realigns the mounting point on the axle with the track bar and eliminates the binding problem caused by the rotated axle housing. As a result, the track bar and its bushings are returned to a neutral position and unwanted stresses are relieved from the mounting points.

Our Relocation Brackets also raise the mounting point on the axle to reduce track bar operating angles and minimize side-to-side axle movement. This improves vehicle stability on lifted vehicles at higher speeds and helps keep the axle centered beneath the chassis at all times. A heavy, steel crush-proof sleeve fits inside the factory bracket to ensure maximum torque can be applied to the mounting hardware without risk of loosening or distortion over time.



2 Products View All

209-OGS160
Track Bar Relocation Bracket
  • 1997-06 TJ Wrangler
  • Rear, Over 3.0" Lift
  • 1/pkg
    More info on JKS Manufacturing OGS160

    Fits Applications
  • $54.99
    Ships
    06/27/13

    209-OGS170
    Track Bar Relocation Bracket
  • 2007-UP JK Wrangler
  • Rear, Over 2.0" Lift
  • 1/pkg
    More info on JKS Manufacturing OGS170

    Fits Applications
  • $112.99
    Ships
    06/27/13

    2 Products View All