340 Stealth Fuel Pumps
GM specific applications. The Aeromotive 340 Stealth Fuel Pump is a high-output, in-tank, electric fuel pump that fits most popular EFI applications. The Aeromotive 340 is a compact, lightweight pump that bolts into many existing hanger assemblies. What sets the 340 Stealth Pump apart is its superior flow throughout a wide pressure range. Compared to other popular aftermarket pumps, at 40 psi the 340 boasts more than 340 lph. Thats over 30% more flow. This pump is ideal for applications requiring more flow while retaining the factory lines and mounting provisions available in the Original Equipment (O.E.) configuration. The 340 is also perfect for use as a universal replacement for applications that require more flow to support forced air power adders such as turbo and supercharged applications. Fits most vehicles where popular aftermarket pumps are applicable. Center Inlet. E85 Compatible. OEM 39mm Body. Includes universal filter sock. Designed for in-tank use only. Can be used in Carbureted or EFI applications. Turbine pump mechanism increases durability and can be used in pulse modulated applications. P/N 11569 Includes: 340 Stealth Pump, Universal Drop Parts Kit (Filter, Wiring Pigtail, Rubber Hose, (2) Clamps, Rubber Grommet). Supersedes P/N 11169.
How much more current will this pump draw than the stock pump? Will it cause increased heat in existing wiring and relays? I have a 1988 Trans Am with a Stealthram and 36 lb injectors with 54 psi fuel pressure. Will this support 550 hp?
putting a 5.3 vortec in a 91 blazer-this pump is a direct replacement for the stock pump right? and also I was thinking about using this pump with the ac delco gf822k filter/regulator? is this combo ok for a stock 5.3?
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.