Manual Transmission Applications
- Short water pump required for 1967 and older cars with big block conversion
- Battery relocation required
- Requires V-belt system, will not work with sepentine belt system
|Inlet Location & Size:||Driver Side / 1-1/2''|
|Outlet Location & Size:||Passenger Side / 1-3/4''|
|Radiator Core Height:||15''|
|Radiator Core Width:||28''|
|Radiator Core Thickness:||2''|
Aluminum Radiators Perfect for Performance Cars
Original equipment radiators are designed to cool stock applications so why risk overheating a hot rod or muscle car? Be Cool builds radiators in the same down or cross flow configuration as OE to avoid installation issues yet incorporates upgrades to increase cooling capacity. Downflow radiator tanks are on the top and bottom of the core; crossflow radiator tanks are on the sides. Both cool equally as long as the core surface is the same in square inches. Plus, epoxy-free assembly improves heat dissipation. Be Cool guarantees coolant temperature will drop at least 20° or your money back!
- Aluminum Construction with Natural or Polished Finish
- 40% Lighter than Conventional OE Radiators but More Cooling Power
- Dual 1" Tube Core
- Single-Pass Design
- 100% Pressure Tested
- Form-Folded Straight Tank
- Compatible with All Coolants
- Direct Replacement Mounting
- OE Inlet/Outlet Size and Location
- Billet Filler Neck with High-Capacity Overflow Tube
- Automatic Transmission Radiators Have Heavy-Duty Cooler
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.