Track OrderOrder Status & ReturnsHelpGift CardsHelpHelp CenterPhone1-800-345-4545
Logo
Cart0
$000
Magnum Hydraulic Roller Camshaft Complete Kit Chevy 4.3L V6 1980-97 Lift: .500"/.500"
InfoVehicle Info Needed
COMP CAMSPART NUMBER: 249-K18-412-8

Magnum Hydraulic Roller Camshaft Complete Kit Chevy 4.3L V6 1980-97 Lift: .500"/.500"

$1,21595
ShippingShips Tomorrow
Lowest PriceLowest Price Guarantee

Items You Need

Valve Spring Compressor [Stud Mount]

JEGS

Valve Spring Compressor [Stud Mount]

Part Number : 555-80521
$5299$58.99
You Save$6.00
Engine Assembly Lube [4 oz. Bottle]

JEGS

Engine Assembly Lube [4 oz. Bottle]

Part Number : 555-28000
$599$6.99
You Save$1.00
Valve Spring Compressor [Stud Mount]

JEGS

Valve Spring Compressor [Stud Mount]

Part Number : 555-80518
$919$9.99
You Save$0.80
Precision Cam Degree Wheel Kit [11 in.]

JEGS

Precision Cam Degree Wheel Kit [11 in.]

Part Number : 555-81621
$14999$161.99
You Save$12.00

Chevrolet 4.3 Liter 262ci 90° 6 Cyl. 1980-1997
  • Retro Fit for Computer Controlled Vehicles
      • Magnum Hydraulic Roller Camshaft Complete Kit
      Chevy 4.3L V6 1980-97
    • Lift: .500"/.500"
    • Duration: 260°/266°
    • Lobe Separation Angle: 112°
    • RPM Range: 1200-4500

    • Cams Are Very Aggressive
    • Designed For Performance Oriented Vehicles
    • Deliver More Power Than Standard Camshafts
    • 1 Year Limited Warranty

      90 Degree V6; 4.3: 262; Chevrolet 262; Chevrolet 4.3L; LB1; LB4; L35; LF6; S10; Blazer; S10 Blazer; S15; Sonoma; GMC; Safari; Astro Van; Safari; GMC Safari; Silverado


      Works with stock computer, fuel injection. Good low end torque and gas mileage.

    Emissions Note:

    This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.

    CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART

    Part TypeCamshaft Kit
    BrandCOMP CAMS
    Package Height5.0
    Package Width10.5
    Package Length26.0
    Weight26.0 PG
    Part CategoryPerformance Parts
    Exh. Duration @ .050 In. (Deg)210
    Cam StyleHydraulic roller tappet
    Grind Number260AHR
    Exh. Duration Advertised (Deg)266
    Locks IncludedYes
    Engine Make/SizeChevy 262
    Retainers IncludedYes
    Intake Valve Lift With Factory Rocker Arm Ratio (I0.5
    Int. Duration @ .050 In. (Deg)206
    Assembly Lubricant IncludedNo
    Basic Operating Rpm Range1,200-4,500
    Pushrods IncludedNo
    Gaskets IncludedNo
    Rocker Arms IncludedNo
    Intake Valve Lift0.5 in (12.7 mm)
    Computer-Controlled CompatibleYes
    Int. Duration Advertised (Deg)260
    Lobe Separation (Deg)112
    Rpm Range1200-4500
    Lifter StyleHydraulic roller
    Advertised Duration260 int./266 exh.
    Exhaust Valve Lift With Factory Rocker Arm Ratio (0.5
    Valve Springs IncludedYes
    UsageStreet/Strip
    Valve Lift With Factory Rocker Arm Ratio0.500 int./0.500 exh.
    QuantitySold as a kit
    Valve Stem Seals IncludedYes
    Exhaust Valve Lift0.5 in (12.7 mm)
    Advertised Intake Duration260
    Outside Diameter Of Outer Spring1.43 in (36.3 mm)
    Intake Duration At 050 Inch Lift206
    Exhaust Duration At 050 Inch Lift210
    Timing Chain StyleDouble roller
    Timing Chain And Gears IncludedYes
    Advertised Exhaust Duration266
    Lifter TypeHydraulic Roller
    Part FitmentSemi Universal
    Duration At 050 Inch Lift206 int./210 exh.
    Valve Springs RequiredNo
    Lifters IncludedYes
    Vendor Part NumberK18-412-8
    Package Qty1
    Package TypeEA
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning