$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

Comp Cams XFI RPM Hydraulic Roller Camshaft Kit GM Gen III/LS1/LS2/LS6 1997-PRESENT (Three-Bolt)
InfoVehicle Info Needed
COMP CAMSPART NUMBER: 249-K54-414-11

Comp Cams XFI RPM Hydraulic Roller Camshaft Kit GM Gen III/LS1/LS2/LS6 1997-PRESENT (Three-Bolt)

$1,31795
ShippingShips Tomorrow
Lowest PriceLowest Price Guarantee

XFI RPM Hydraulic Roller Camshafts
    XFI RPM Hydraulic Roller Camshaft Kit
    GM Gen III/LS1/LS2/LS6 1997-PRESENT (Three-Bolt)
  • Lift: .525''/.532''
  • Duration: 269°/273°
  • Lobe Separation Angle: 114°
  • RPM Range: 1300-6300

    Great mid-range with superior top end power. Needs computer modifications.

    Kit Includes:
  • Camshaft
  • Lifters
  • Valve Springs
  • Retainers
  • Valve Locks and Seals
  • Timing Chain Set

    Operating Range:1300-6300 RPM
    Duration Advertised:269° Intake / 273° Exhaust
    Duration @ .050':216° Intake / 220° Exhaust
    Valve Lift w/1.7 Rockers:.525' Intake / .532' Exhaust
    Lobe Separation Angle:114°

    GM, 4.8, 5.3, 5.7, 6.0, 6.2, 7.0, LS1, LS2, LS3, LS4, LS6, LS7, LSA, LS9, Camaro, Silverado, LS Swap, 383, 350, SBC, Chevelle, Yukon, L92, LM7, 325, GMC, Trailblazer, Corvette, GM LS, GEN III, GEN 3, GEN IV, GEN 4, DOD, AFM, VVT, BTR, Texas Speed


    Great mid-range with superior top end power. Needs programmer.

Emissions Note:

This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.

CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART

Ever since its introduction, GM's LSX/Gen III engine has quickly become the ''preferred choice'' among many engine builders and performance enthusiasts. Right from the factory, the GM LSX/Gen III engine boasts a surprisingly efficient induction design, reduced weight and impressive power output. As the leading developer of high performance LSX/Gen III valve train technology, Comp Cams has engineered a full line of products proven to release the incredible horsepower and torque hidden inside while never sacrificing ever-critical reliability.

Show MoreFeatures:
  • Newest and quickest lobe profiles; provide a terrific increase in performance
  • Tuned for use in EFI applications where extra air flow signal through the carburetor is not required (feature wider lobe separation without loss of responsiveness)
  • Work well with aftermarket cylinder heads & feature high lift

     

Part TypeCamshaft Kit
Product LineComp Cams XFI Roller Camshafts For GM LS-Series/Gen III Engines
BrandCOMP CAMS
Package Height5.0
Package Width10.5
Package Length26.0
Weight26.5 PG
Part CategoryPerformance Parts
Exh. Duration @ .050 In. (Deg)220
Cam StyleHydraulic roller tappet
Grind NumberXR269HR
Exh. Duration Advertised (Deg)273
Locks IncludedYes
Engine Make/SizeChevy 350 LS6
Retainers IncludedYes
Intake Valve Lift With Factory Rocker Arm Ratio (I0.525
Int. Duration @ .050 In. (Deg)216
Assembly Lubricant IncludedYes
Basic Operating Rpm Range1,300-6,300
Pushrods IncludedNo
Gaskets IncludedNo
Rocker Arms IncludedNo
Intake Valve Lift0.525 in (13.335 mm)
Computer-Controlled CompatibleYes
Int. Duration Advertised (Deg)269
Lobe Separation (Deg)114
Rpm Range1300-6300
Lifter StyleHydraulic roller
Advertised Duration269 int./273 exh.
Exhaust Valve Lift With Factory Rocker Arm Ratio (0.532
Valve Springs IncludedYes
UsageStreet/Performance
Valve Lift With Factory Rocker Arm Ratio0.525 int./0.532 exh.
Camshaft Gear Attachment3-bolt
QuantitySold as a kit
Valve Stem Seals IncludedYes
Exhaust Valve Lift0.532 in (13.513 mm)
Advertised Intake Duration269
Outside Diameter Of Outer Spring1.055 in (26.8 mm)
Intake Duration At 050 Inch Lift216
Exhaust Duration At 050 Inch Lift220
Timing Chain And Gears IncludedNo
Advertised Exhaust Duration273
Lifter TypeHydraulic Roller
Part FitmentSemi Universal
Duration At 050 Inch Lift216 int./220 exh.
Valve Springs RequiredYes
Lifters IncludedYes
Vendor Part NumberK54-414-11
Package Qty1
Package TypeEA
Some parts are not legal for use in California or other states with similar laws / regulations
p65 warning