$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

Comp Cams XFI RPM Hydraulic Roller Cam Kit GM Gen III/LS1/LS2/LS6 1997-PRESENT
InfoVehicle Info Needed
COMP CAMSPART NUMBER: 249-K54-416-11

Comp Cams XFI RPM Hydraulic Roller Cam Kit GM Gen III/LS1/LS2/LS6 1997-PRESENT

$1,19495
ShippingShips on Nov 23, 2026
Lowest PriceLowest Price Guarantee

XFI RPM Hydraulic Roller Camshafts
XFI RPM Hydraulic Roller Cam Kit
GM Gen III/LS1/LS2/LS6 1997-PRESENT (Three-Bolt)
  • Lift: .530''/.534''
  • Duration: 273°/277°
  • Lobe Separation Angle 112°
  • RPM Range: 1600-6600

    Street/strip camshaft for high RPM power. Likes higher rocker ratios. Must have programmer.

    Kit Includes:

      • Camshaft
      • Lifters
      • Valve Springs
      • Retainers
      • Valve Locks and Seals

     

    Operating Range:1600-6600 RPM
    Duration Advertised:273° Intake / 277° Exhaust
    Duration @ .050':220° Intake / 224° Exhaust
    Valve Lift w/1.7 Rockers:.530' Intake / .534' Exhaust
    Lobe Separation Angle:112°

    GM, 4.8, 5.3, 5.7, 6.0, 6.2, 7.0, LS1, LS2, LS3, LS4, LS6, LS7, LSA, LS9, Camaro, Silverado, LS Swap, 383, 350, SBC, Chevelle, Yukon, L92, LM7, 325, GMC, Trailblazer, Corvette, GM LS, GEN III, GEN 3, GEN IV, GEN 4, DOD, AFM, VVT, BTR, Texas Speed


    Street/strip camshaft for high RPM power. Likes higher rocker ratios. Must have programmer.

    Emissions Note:

    This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.

    CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART

  • Ever since its introduction, GM's LSX/Gen III engine has quickly become the ''preferred choice'' among many engine builders and performance enthusiasts. Right from the factory, the GM LSX/Gen III engine boasts a surprisingly efficient induction design, reduced weight and impressive power output. As the leading developer of high performance LSX/Gen III valve train technology, Comp Cams has engineered a full line of products proven to release the incredible horsepower and torque hidden inside while never sacrificing ever-critical reliability.

    Show MoreFeatures:
    • Newest and quickest lobe profiles; provide a terrific increase in performance
    • Tuned for use in EFI applications where extra air flow signal through the carburetor is not required (feature wider lobe separation without loss of responsiveness)
    • Work well with aftermarket cylinder heads & feature high lift

       

    Part TypeCamshaft Kit
    Product LineComp Cams XFI Roller Camshafts For GM LS-Series/Gen III Engines
    BrandCOMP CAMS
    Package Height5.0
    Package Width10.5
    Package Length26.0
    Weight26.5 PG
    Part CategoryPerformance Parts
    Exh. Duration @ .050 In. (Deg)224
    Cam StyleHydraulic roller tappet
    Grind NumberXR273HR
    Exh. Duration Advertised (Deg)277
    Locks IncludedYes
    Engine Make/SizeChevy 350 Gen III
    Retainers IncludedYes
    Intake Valve Lift With Factory Rocker Arm Ratio (I0.53
    Int. Duration @ .050 In. (Deg)220
    Assembly Lubricant IncludedYes
    Basic Operating Rpm Range1,600-6,600
    Pushrods IncludedNo
    Gaskets IncludedNo
    Rocker Arms IncludedNo
    Intake Valve Lift0.53 in (13.462 mm)
    Computer-Controlled CompatibleYes
    Int. Duration Advertised (Deg)273
    Lobe Separation (Deg)112
    Rpm Range1600-6600
    Lifter StyleHydraulic roller
    Advertised Duration273 int./277 exh.
    Exhaust Valve Lift With Factory Rocker Arm Ratio (0.534
    Valve Springs IncludedYes
    UsageStreet/Performance
    Valve Lift With Factory Rocker Arm Ratio0.530 int./0.534 exh.
    Camshaft Gear Attachment3-bolt
    QuantitySold as a kit
    Valve Stem Seals IncludedYes
    Exhaust Valve Lift0.537 in (13.64 mm)
    Advertised Intake Duration273
    Outside Diameter Of Outer Spring1.055 in (26.8 mm)
    Intake Duration At 050 Inch Lift220
    Exhaust Duration At 050 Inch Lift224
    Timing Chain And Gears IncludedNo
    Advertised Exhaust Duration277
    Lifter TypeHydraulic Roller
    Duration At 050 Inch Lift220 int./224 exh.
    Valve Springs RequiredYes
    Lifters IncludedYes
    Vendor Part NumberK54-416-11
    Package Qty1
    Package TypeEA
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning