Competition Engineering 8-Point Roll Bar Main Hoop 1993-2002 Camaro, Firebird

Specific Fit GM Roll Cage Kits

Competition Engineering offers a variety of Roll Bars & Roll Cages to meet the different requirements of most racers. Countless hours were spent developing and perfecting these kits to offer the utmost in strength and fit without adding unnecessary weight. All tubing used exceeds the requirements of racing sanctioning bodies and is mandrel formed on computer controlled equipment for uniform wall thickness. Every Competition Engineering roll cage and roll bar kit has been designed to fit the specific application with only minor modifications necessary for installation. Welding is required.

TWO SEPARATE PART NUMBERS Are Required to Receive a Complete Roll Bar or Cage Kit (Main Hoop & Strut Kit).

8-Point Roll Bars

Your Choice of 1-3/4" OD x .134" Wall Mild Steel Tubing or 1-3/4" OD x .083" Wall Aircraft-Quality AMS T-6736 Chrome Moly Tubing

Main Hoop Kits Include: Mandrel Formed Main Hoop

Strut Kits Include: Two Rear Struts, Two Front Door Bars, Main Hoop Crossbrace, Two Diagonal Hoop Supports, Six Weld Joint Gussets, and Eight 6" x 6" x 1/8" Thick Steel Mounting Plates

Tube Ends Notched for a Better Fit

NHRA & IHRA Approved

Complete Instructions Included to Ensure Hassle-Free Installation

Welding Required

10-Point Roll Cages

Bridges the Gap Between an 8-Point Roll Bar and a 12-Point Roll Cage, Providing Increased Driver Protection During Rollover

Your Choice of 1-5/8" OD x .134" Wall Mild Steel Tubing or 1-5/8" OD x .083" Wall Aircraft-Quality AMS T-6736 Chrome Moly Tubing

Main Hoop Kits Include: Mandrel Formed Main Hoop, One Top Hoop, Two Front Down Stuts, One Main Hoop Cross Brace, Two Diagonal Hoop Supports

Strut Kits Include: Two Rear Struts, Two Front Door Bars, Twelve Weld Joint Gussets, and Ten 6" x 6" x 1/8" Thick Steel Mounting Plates

Tube Ends Notched for a Better Fit

Meets NHRA and IHRA Requirements for Cars Running 10.99 or Quicker with Modified Firewalls and/or Floorboards

Complete Instructions Included to Ensure Hassle-Free Installation

Welding Required

12-Point Roll Cages

Designed to Provide the Utmost in Chassis Strength

Your Choice of 1-5/8" OD x .134" Wall Mild Steel Tubing or 1-5/8" OD x .083" Wall Aircraft-Quality AMS T-6736 Chrome Moly Tubing

Main Hoop Kits Include: Mandrel Formed Main Hoop, One Top Hoop, Two Front Down Stuts, One Main Hoop Cross Brace, Two Forward Struts

Strut Kits Include: Two Rear Struts, Two Front Door Bars, Two Diagonal Hoop Supports, One Rear X-Brace Twelve Weld Joint Gussets, and Ten 6" x 6" x 1/8" Thick Steel Mounting Plates

Superior 360° Driver Protection

Tube Ends Notched for a Better Fit

NHRA & IHRA Approved

Complete Instructions Included to Ensure Hassle-Free Installation

Welding Required