800.345.4545
Unrivaled Customer Service
And Expert Tech Advice!  
FREE SHIPPING!
Same Day Shipping Before 11 PM ET
0
My Cart
0
$0.00
Shop By Vehicle
Shop By
Category
Close Menu
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories


Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates
Rebates
Help

Crane Cams PowerMax Hydraulic Roller Tappet Camshaft Only Lift: .452" /.465" Duration: 270°/276° RPM Range: 1800-5800 C.A.R.B. Approved*

Crane Cams 104224

271-104224

jegs shipping
FREE Shipping
Estimated to ship directly from the manufacturer on 08/20/18
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Crane Cams PowerMax Hydraulic Roller Tappet Camshaft Only Lift: .452" /.465" Duration: 270°/276° RPM Range: 1800-5800 C.A.R.B. Approved* $458.86
PowerMax Hydraulic Roller Tappet Camshaft Only
Lift: .452''/.465''
Duration: 270°/276°
RPM Range: 1800-5800
C.A.R.B. Approved*

Crane Cams 104224 Details

Chevy 305/350ci (5.0/5.7L) Small Block 1987-92

Crane PowerMax emissions legal cams produce amazing increases in torque, horsepower and throttle response while extending the rpm powerband of computer controlled performance passengers cars and light trucks. PowerMax Emissions cams also permit full function of stock engine control computers. Plus, they work great with aftermarket performance chips.

*Note: 50-State Legal. This camshaft has been granted a California Air Resources Board (CARB) exemption (an ''EO'' number), or is a direct or consolidated replacement part. It is 50-state legal, per the manufacturer's application guide.

**Note: Beginning in 1987, most of the V-6 and V-8 engines were equipped with hydraulic roller camshafts. There are differences in the block to accommodate a cam retention thrust plate and the anti-rotation mechanism for the lifters. These blocks are identifiable by bolt holes for a cam retention plate under the upper timing sprocket, as well as bosses and tapped holes in the lifter valley for lifter retention hardware. The camshafts on these engines have a step nose and smaller bolt circle on the front of the cam. An earlier model camshaft may be used in these blocks by using the appropriate timing chain set and adding a thrust button when using a roller cam.
1988-99 Chevrolet 305 and 350 V-8 engines (and some 1987 350 V-8 engines) use a different configuration camshaft core than the 1955-87 engines and cannot be interchanged.

FOR 1987-89 CORVETTES, CAMAROS AND FIREBIRDS FACTORY EQUIPPED W/350 TPI ENGINES. ADJUSTABLE FUEL PRESSURE REGULATOR IS RECOMMENDED FOR MAXIMUM PERFORMANCE. (50 STATE LEGAL FOR LISTED APPLICATIONS, C.A.R.B. E.O. D-225-22).

Grind Number: 2032
Operating Range:2000-5500 RPM
Duration Advertised:270° Intake / 276° Exhaust
Duration @ .050'' Lift:214° Intake / 220° Exhaust
Valve Lift w/1.5 Rockers:.452'' Intake / .465'' Exhaust
Lobe Separation Angle:112°
Max Lift Angle:107° ATDC Intake / 117° BTDC Exhaust
Open/Close @.050'' Cam Lift:Intake - 0° BTDC (opens) / 34° ABDC (closes)
Exhaust - 47° BBDC (opens) / (7°) BTDC (closes)

271-104224 is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Amazing design I ran this in my daily driver '89 Formula 350, and surprised many people.
Date published: 2018-02-25
  • y_2018, m_8, d_16, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_10001_10001_1338986, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_jegs
Some parts are not legal for use in California or other states with similar laws / regulations