Top Categories
All Categories

Top Categories

All Categories

Shop By Vehicle
's Account
Gift Cards
Track Order
Edelbrock 15805

Edelbrock E-Force Hardware Kit for 2009 Mustang GT


made in usa
Ships directly from the manufacturer
Save $20 Off $250, $50 Off $500, $100 Off $1,000, $150 Off $2,000. Promo Code: SAVEMORE exclusions apply

Edelbrock E-Force Hardware Kit for 2009 Mustang GT $66.95
Out of stock
E-Force Hardware Kit
  • 2009 Mustang GT
  • For Use With 350-1580 and 350-1585
  • Edelbrock 15805 Details

    E-Force 4.6L Mustang Accessories

    This kit is required when installing the new Edelbrock E-Force Supercharger kit on a 2009 Ford Mustang GT. These Mustangs use a different alternator configuration than previous years and this kit is designed to replaces the OE pulley with a reverse rotation pulley for use with our E-Force Supercharger. Includes new alternator pulley and necessary hardware for installation. Alternator Pulley Kit for 2009 Ford Mustang GT.


    Port Style
    Sold as a kit
    Manufacturer's Part Number:

    Stage 1 Street Legal Supercharger Kit
    The new Edelbrock E-Force Supercharger System for the S197 Ford Mustang 4.6L 3V will allow you to boost your Pony to a very impressive 466 horsepower and 439 ft./lbs. of torque. These kits feature; a low profile to fit under the factory hood, fifteen inch long runners for low end torque, low boost pressure minimizes engine stress, and low air restriction through the supercharger. All of this adds up to the largest possible gain in horsepower while maintaining safe operation on a factory engine. For additional peace of mind when installing a street legal kit with tuner on your Mustang an optional 3-year/36,000-mile supplemental warranty is available!

    Stage 2 Supercharger Kit
    The E-Force Stage 2 system offers you greater power gains than the Stage 1 Street Legal system. Unlike the Stage 3 Pro Tuner systems the Stage 2 includes everything needed to complete the installation. In addition to the base supercharger and components, the Stage 2 System features parts like a smaller drive pulley, competition air intake system, high flow fuel pump and a custom tune. All of this turns a conservative street legal system in to a race ready monster, achieving more horsepower and torque that today's racers crave!

    Stage 3 Pro Tuner Supercharger Kit
    Edelbrock E-Force Stage 3 Pro Tuner Supercharger systems are based on the street systems (350-1580 and 350-1582), but have been pared down to the essential components that a racer needs, without the extras experienced racers prefer to customize for their specific race application. These systems include the essential supercharger package components and give you the option of choosing your own extra equipment you want when building a custom supercharged 2005-10 Mustang 4.6L for your own competitive advantage.
    For competition racing use only.

    The core of the supercharger system is the all new Eaton Gen VI TVS® Supercharger rotating assembly. Eaton's assembly features a four lobe design with 160° of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. The supercharger assembly has been integrated into the intake manifold for a seamless design with minimal components, eliminating the possibility of vacuum leaks between a gasket surface. Edelbrock's unique inverted supercharger assembly is placed low in the valley, allowing for an incredible industry leading 15" of intake runner length for maximizing low end torque. An integrated bypass valve helps eliminate parasitic loss under light throttle for improved mileage potential.

    The supercharger system breathes through a specially engineered 85mm electronic throttle body matched with the most unique and efficient inlet configuration on the market. This combination results in a shorter less restrictive intake path for improved air flow, eliminating the need for a jack-shaft. Keeping the air cool is a 110 square inch high capacity air to water intercooler and dual core low temp heat exchanger. This intercooler is the largest available on the market today.

    Finally... the Edelbrock E-Force Supercharger system is not just a performance upgrade, it also has great looks! The supercharger assembly and matching coil covers are uniquely styled to give your engine compartment a custom look. All of these components have been black powdered coated for durability with highlighted fins and Edelbrock logo for a timeless look.

    Edelbrock E-Force Supercharger Kit For 4.6L Mustang Features:

  • Installs under the stock hood while maintaining factory accessories
  • 2300cc (140 cubic inch) Eaton® TVS Gen VI Rotor assembly
  • Unique intake manifold design with 15" long runners for increased low-end torque
  • 100,000 mile self-contained oiling system (no drilling or plumbing required)
  • Complete package includes supercharger/intake assembly, air inlet with 85mm throttle body, fuel injectors, air-to-water intercooler, spark plugs, flash tuner with proper calibration
  • Available 3 Year/36,000 mile warranty- click here to see details
  • The most efficient system available - 466 HP and 439 ft./lbs of Torque on only 5 lbs. of boost!
  • for absolute quality and performance!

  • Does Edelbrock 15805 fit your vehicle?

    Narrow Results

    2009  FORD MUSTANG

    • EngineType: ALL
    • SubModel: GT

    Items You Need

    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.


    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.