Duration Advertised	270° Intake/270° Exhaust
Duration @ .050''	204° Intake/204° Exhaust
Lift @ Valve	.420'' Intake/.420'' Exhaust
Lift @ Cam	.280'' Intake/.280'' Exhaust
Lobe Separation Angle	110°
Intake Centerline	106°
Intake Timing @ .050"	Open 4° ATDC Close 28° ABDC
Exhaust Timing @ .050"	Open 36° BBDC Close 12° BTDC
Vacuum @ 1000RPM Idle	16"

INSTALLATION NOTES:

Do not use late model timing chain and gear sets that are designed for emission-controlled engines. They are machined in a retarded position and are not recommended for this camshaft installation. Use Performer-Link Timing Chain Gear Set 350-7803 or similar set.

Do not use dual valve springs. Use recommended Edelbrock valve springs 350-5877 or 350-5977 (rotators).

Not for 1985 and later engines with roller lifters.

Use only stock ratio rocker arms.

Specifications:

Exhaust Valve Lift (in.)

0.42

Intake Valve Lift (in.)

0.420

Exh. Duration @ .050 in. (Deg)

204

Int. Duration @ .050 in. (Deg)

204

Exh. Duration Advertised (Deg)

270

Int. Duration Advertised (Deg)

270

Lifter Type

Hydraulic Flat Tappet

Engine Make/Size

Mopar 318-360

Usage

Street/Performance

RPM Range

0-6750

Gaskets Included

Advertised Duration

270 int./270 exh.

Advertised Exhaust Duration

270

Advertised Intake Duration

270

Assembly Lubricant Included

Yes

Basic Operating RPM Range

Idle-5,500

Cam Style

Hydraulic flat tappet

Computer-Controlled Compatible

Duration at 050 inch Lift

204 int./204 exh.

Exhaust Duration at 050 inch Lift

204

Exhaust Valve Lift with Factory Rocker Arm Ratio (

0.42

Intake Duration at 050 inch Lift

204

Intake Valve Lift with Factory Rocker Arm Ratio (i

0.42

Lifter Style

Hydraulic flat tappet

Lifters Included

Yes

Locks Included

Pushrods Included

Quantity

Sold as a kit

Retainers Included

Rocker Arms Included

Timing Chain and Gears Included

Valve Lift with Factory Rocker Arm Ratio

0.420 int./0.420 exh.

Valve Springs Included

Valve Springs Required

Yes

Valve Stem Seals Included

Lobe Separation (Deg)

110

Manufacturer's Part Number:

2177

Edelbrock Performer-Plus Camshaft Kits are designed for optimum torque from the low end to midrange. Performer-Plus Camshafts match Performer Manifolds for vehicles operating from off-idle to 5500 RPM. They are smooth-idling cams for daily drivers, trucks, vans, RVs, and 4x4s. You can expect major improvement in throttle response and torque. All camshafts come with flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube, and instructions. Try one of the many Edelbrock cam and lifter kits available to build horsepower and torque.

Please Click here to download the Instructions PDF File

Does Edelbrock 2177 fit your vehicle?

Narrow Results

Filter By
Year

Filter By
Make

BRISTOL CHECKER CHRYSLER DODGE FARGO PLYMOUTH

Filter By
Model

330 408 409 410 440 A100 PICKUP A100 VAN AEROBUS ASPEN B100 VAN B150 VAN B200 VAN B250 VAN B300 VAN B350 VAN BARRACUDA BELVEDERE BELVEDERE II CARAVELLE CB300 VAN CHALLENGER CHARGER CORDOBA CORONET CUDA CUSTOM D100 PANEL DELIVERY D100 PICKUP D110 PICKUP D150 PICKUP D200 PANEL DELIVERY D200 PICKUP D200 SERIES D210 PICKUP D250 PICKUP D300 PICKUP D350 PICKUP DAKOTA DART DIPLOMAT DUSTER F100 PANEL DELIVERY F100 PICKUP FIFTH AVENUE FLEET SPECIAL FURY FURY I FURY II FURY III FW100 PANEL DELIVERY FW100 PICKUP GRAN FURY GTX IMPERIAL LEBARON MAGNUM MARATHON MATADOR MIRADA MONACO NEW YORKER NEWPORT PB100 VAN PB150 VAN PB200 VAN PB250 VAN PB300 VAN PB350 VAN PHOENIX PIONEER PLAZA POLARA RAMCHARGER RD200 PICKUP RM300 (MOTORHOME) ROAD RUNNER ROYAL MONACO SATELLITE SAVOY SCAMP SENECA SPORT WAGON ST. REGIS SUBURBAN TAXICAB TOWN & COUNTRY TRAILDUSTER TRUCK VALIANT VAN P310 SERIES VAN P320 SERIES VAN P410 SERIES VAN P420 SERIES VAN P450 SERIES VIP VOLARE W100 PANEL DELIVERY W100 PICKUP W110 PICKUP W150 PICKUP W200 PICKUP W250 PICKUP W300 PICKUP W350 PICKUP WM 300 POWER WAGON PICKUP

Filter By
SubModel

Filter By
EngineType

V8 ( 5.2 L / 318 ) V8 ( 5.6 L / 340 ) V8 ( 5.9 L / 360 )

Filter By
CC

5211 5212 5572 5900

Filter By
Liter

5.2 5.6 5.9

Filter By
Aspiration

1960-1961 DODGE PIONEER

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1974-1980 PLYMOUTH PB100 VAN

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: VOYAGER
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1971-1980 DODGE W200 PICKUP

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: BASE
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1977-1978 DODGE MONACO

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1974 PLYMOUTH PB300 VAN

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: VOYAGER EX WAGON
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1968 DODGE DART

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1971-1974 DODGE D300 PICKUP

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: BASE
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1969-1971 PLYMOUTH FURY

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: SPORT
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1960-1967 DODGE D200 SERIES

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1984-1989 CHRYSLER FIFTH AVENUE

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
EngineType: ALL
SubModel: ALL

1957 PLYMOUTH FURY

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1971-1973 DODGE B100 VAN

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: SPORTSMAN
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1974 DODGE CHALLENGER

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: BASE
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1974 DODGE D100 PICKUP

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: BASE
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1967 DODGE CHARGER

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: R/T
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1962 DODGE DART

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: 440
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1971-1973 PLYMOUTH FURY

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: SPORT SUBURBAN
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1965-1967 PLYMOUTH FURY

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: SPORT
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1975 PLYMOUTH DUSTER

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: CUSTOM
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1975-1976 DODGE MONACO

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: ROYAL
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1974 PLYMOUTH FURY III

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1989-1990 DODGE RAMCHARGER

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: BASE
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1968-1970 DODGE A100 PICKUP

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: SPORTSMAN
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1968 DODGE DART

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: GTS
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1972-1973 DODGE B100 VAN

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: BASE
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1971 PLYMOUTH SATELLITE

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: BROUGHAM
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1966-1972 FARGO W200 PICKUP

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1969-1973 DODGE DART

CC: 5572
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.6
SubModel: CUSTOM
CUI: 340
EngineType: V8 ( 5.6 L / 340 )

1960-1961 DODGE DART

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: PIONEER
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1971 DODGE DART

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: SPECIAL
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1975-1976 DODGE D200 PICKUP

CC: 5211
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: CUSTOM
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1983 DODGE DIPLOMAT

CC: 5211
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: MEDALLION
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1971-1974 PLYMOUTH FURY II

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: BASE
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1976-1977 PLYMOUTH VOLARE

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: CUSTOM
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1982-1983 DODGE D150 PICKUP

CC: 5211
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: MISER
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1971-1974 CHRYSLER NEWPORT

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: CUSTOM
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1971 CHRYSLER NEWPORT

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: BASE
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1969 PLYMOUTH VALIANT

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: 100
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1975 DODGE DART

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: SPORT 360
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1980 PLYMOUTH PB200 VAN

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: VOYAGER
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1974 DODGE MONACO

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BROUGHAM
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1979 DODGE D100 PICKUP

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: WARLOCK II
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1958-1959 PLYMOUTH BELVEDERE

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1968 DODGE DART

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: 270
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1973 CHRYSLER NEWPORT

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: BASE
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1972-1974 DODGE DART

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: CUSTOM
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1969-1970 DODGE CORONET

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: 500
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1979-1980 DODGE ST. REGIS

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: BASE
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1971 PLYMOUTH BELVEDERE

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
EngineType: ALL
SubModel: SATELLITE

1968 PLYMOUTH FURY

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: SUBURBAN
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1976 DODGE DART

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: SWINGER
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1961 DODGE PHOENIX

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1979-1980 CHRYSLER NEW YORKER

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1984 DODGE B350 VAN

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
EngineType: ALL
SubModel: BASE

1974 PLYMOUTH PB200 VAN

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: VOYAGER EX WAGON
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1968-1974 DODGE D200 PICKUP

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1976 DODGE CHARGER

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: SPORT
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1983 PLYMOUTH PB150 VAN

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: VOYAGER
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1980 CHRYSLER CORDOBA

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: 300
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1971-1973 PLYMOUTH ROAD RUNNER

CC: 5572
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.6
SubModel: BASE
CUI: 340
EngineType: V8 ( 5.6 L / 340 )

1980 CHRYSLER CORDOBA

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: CROWN
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1971 PLYMOUTH SATELLITE

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BROUGHAM
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1978-1988 PLYMOUTH CARAVELLE

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1974-1975 PLYMOUTH DUSTER

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
EngineType: ALL
SubModel: 360

1959 DODGE VAN P420 SERIES

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
EngineType: ALL
SubModel: ALL

1969-1971 DODGE CHARGER

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: R/T
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1991 DODGE RAMCHARGER

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
EngineType: ALL
SubModel: CANYON SPORT

1978 DODGE MAGNUM

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: XE
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1976-1980 PLYMOUTH VOLARE

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1960-1961 DODGE SENECA

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1976 PLYMOUTH SCAMP

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1974 PLYMOUTH DUSTER

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: BASE
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1966-1972 FARGO W100 PICKUP

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1971-1973 PLYMOUTH FURY

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: SUBURBAN
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1972-1978 DODGE MONACO

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: BASE
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1981 PLYMOUTH PB150 VAN

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: VOYAGER
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1971-1972 DODGE DART

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: DEMON
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1973 DODGE CORONET

CC: 5572
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.6
SubModel: BASE
CUI: 340
EngineType: V8 ( 5.6 L / 340 )

1970-1971 PLYMOUTH BARRACUDA

CC: 5572
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.6
SubModel: BASE
CUI: 340
EngineType: V8 ( 5.6 L / 340 )

1968 DODGE DART

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: GT
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1981-1983 PLYMOUTH PB350 VAN

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
EngineType: ALL
SubModel: ALL

1977-1991 DODGE D150 PICKUP

CC: 5211
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1960-1963 PLYMOUTH FLEET SPECIAL

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1971-1974 PLYMOUTH SATELLITE

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: SEBRING PLUS
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1977 DODGE ROYAL MONACO

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1959 DODGE W200 PICKUP

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1974 PLYMOUTH FURY

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: CUSTOM SUBURBAN
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1971-1973 PLYMOUTH SATELLITE

CC: 5572
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.6
SubModel: SEBRING
CUI: 340
EngineType: V8 ( 5.6 L / 340 )

1962 DODGE DART

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: 330
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1959 DODGE W100 PICKUP

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1971 PLYMOUTH BELVEDERE

CC: 5572
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.6
SubModel: BASE
CUI: 340
EngineType: V8 ( 5.6 L / 340 )

1974 DODGE CHARGER

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: BASE
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1968 PLYMOUTH FURY II

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1974 PLYMOUTH VALIANT

CC: 5212
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BROUGHAM
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1972-1973 PLYMOUTH BARRACUDA

CC: 5572
Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.6
SubModel: BASE
CUI: 340
EngineType: V8 ( 5.6 L / 340 )

1975-1976 DODGE CORONET

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: BASE
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1976 PLYMOUTH VALIANT

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1981-1989 DODGE B150 VAN

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.2
SubModel: BASE
CUI: 318
EngineType: V8 ( 5.2 L / 318 )

1975-1976 DODGE CORONET

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: CRESTWOOD
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1976-1980 DODGE ASPEN

Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Idle Vacuum at 1000 RPM - 16 inch~Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Liter: 5.9
SubModel: BASE
CUI: 360
EngineType: V8 ( 5.9 L / 360 )

1 2 ... 7 >

What Kind of horse power and torque should I get I got a camper vans it's heavy the 318 just lack power would this help

Asked by: JD 992

Power range is idle to 5500. No HP or torque claims over stock from Edelbrock

Answered by: SteveM

Date published: 2017-08-24

Items You Need

Edelbrock 4495 - Signature Series Valve Covers 1965-1991 Small Block Chrysler 318-360

Only $53.95

Ships Today

Edelbrock 7803 - Performer-Link Timing Chain Set for 1956-90 Small Block Chrysler , 331-392 Hemi V8, & 3.9L V6

Only $65.95

Ships Today

JEGS 80521 - Stud Mounted Valve Spring Compressor Tool

Only $44.94

Ships Today

See All Items You Need

Some parts are not legal for use in California or other states with similar laws / regulations

Top Categories

All Categories

createCookie('continuePage',window.location,1);

Edelbrock Performer-Plus Camshaft Kit for Small Block Chrysler

Part Number: 350-2177

Edelbrock 2177 Details

Specifications:

Does Edelbrock 2177 fit your vehicle?

1960-1961 DODGE PIONEER

1974-1980 PLYMOUTH PB100 VAN

1971-1980 DODGE W200 PICKUP

1977-1978 DODGE MONACO

1974 PLYMOUTH PB300 VAN

1968 DODGE DART

1971-1974 DODGE D300 PICKUP

1969-1971 PLYMOUTH FURY

1960-1967 DODGE D200 SERIES

1984-1989 CHRYSLER FIFTH AVENUE

1957 PLYMOUTH FURY

1971-1973 DODGE B100 VAN

1974 DODGE CHALLENGER

1974 DODGE D100 PICKUP

1967 DODGE CHARGER

1962 DODGE DART

1971-1973 PLYMOUTH FURY

1965-1967 PLYMOUTH FURY

1975 PLYMOUTH DUSTER

1975-1976 DODGE MONACO

1974 PLYMOUTH FURY III

1989-1990 DODGE RAMCHARGER

1968-1970 DODGE A100 PICKUP

1968 DODGE DART

1972-1973 DODGE B100 VAN

1971 PLYMOUTH SATELLITE

1966-1972 FARGO W200 PICKUP

1969-1973 DODGE DART

1960-1961 DODGE DART

1971 DODGE DART

1975-1976 DODGE D200 PICKUP

1983 DODGE DIPLOMAT

1971-1974 PLYMOUTH FURY II

1976-1977 PLYMOUTH VOLARE

1982-1983 DODGE D150 PICKUP

1971-1974 CHRYSLER NEWPORT

1971 CHRYSLER NEWPORT

1969 PLYMOUTH VALIANT

1975 DODGE DART

1980 PLYMOUTH PB200 VAN

1974 DODGE MONACO

1979 DODGE D100 PICKUP

1958-1959 PLYMOUTH BELVEDERE

1968 DODGE DART

1973 CHRYSLER NEWPORT

1972-1974 DODGE DART

1969-1970 DODGE CORONET

1979-1980 DODGE ST. REGIS

1971 PLYMOUTH BELVEDERE

1968 PLYMOUTH FURY

1976 DODGE DART

1961 DODGE PHOENIX

1979-1980 CHRYSLER NEW YORKER

1984 DODGE B350 VAN

1974 PLYMOUTH PB200 VAN

1968-1974 DODGE D200 PICKUP

1976 DODGE CHARGER

1983 PLYMOUTH PB150 VAN

1980 CHRYSLER CORDOBA

1971-1973 PLYMOUTH ROAD RUNNER

1980 CHRYSLER CORDOBA

1971 PLYMOUTH SATELLITE

1978-1988 PLYMOUTH CARAVELLE

1974-1975 PLYMOUTH DUSTER

1959 DODGE VAN P420 SERIES

1969-1971 DODGE CHARGER

1991 DODGE RAMCHARGER

1978 DODGE MAGNUM

1976-1980 PLYMOUTH VOLARE

1960-1961 DODGE SENECA

1976 PLYMOUTH SCAMP

1974 PLYMOUTH DUSTER