0
0
Top Categories
All Categories

Top Categories

All Categories


Shop By Vehicle
Account Login
1-800-345-4545
Gift Cards
Track Order
Help
Edelbrock 2208

Edelbrock Rollin' Thunder Hydraulic Roller Camshaft for 1957-1986 Small Block Chevy

350-2208

made in usa
Free Shipping Ships directly from the manufacturer on 09/24/19
Save $20 Off $250, $50 Off $500, $100 Off $1,000, $150 Off $2,000. Promo Code: SAVEMORE exclusions apply

$371.95
Edelbrock Rollin' Thunder Hydraulic Roller Camshaft for 1957-1986 Small Block Chevy $371.95
Out of stock
QTY
Rollin' Thunder Hydraulic Roller Camshaft
  • 1957-1986 Small Block Chevy 265-350ci
  • Lift: .462''/.479''
  • Duration @ .050: 212°/222°
  • Advertised Duration: 280°/290°
  • Idle-5500 RPM Range
  • Edelbrock 2208 Details

    Small Block Chevy

    Cam Notes: This camshaft works great when matched w/Performer EPS intake manifold p/n 350-2716, Performer carb p/n 350-1407, and Performer E-Tec cylinder heads p/n 350-60979; this combo produces 364 HP / 402 ft.-lbs. of torque. Matching Edelbrock roller tappet lifter set p/n 350-97423

    Operating RangeIdle-5500 RPM
    Duration Advertised280° Intake/290° Exhaust
    Duration @ .050''212° Intake/222° Exhaust
    Lift @ Valve.462'' Intake/.479'' Exhaust
    Lift @ Cam.308'' Intake/.319'' Exhaust
    Lobe Separation Angle112°
    Intake Centerline107°
    Intake Timing @ .050" Open 1° BTDC
    Close 33° ABDC
    Exhaust Timing @ .050" Open 48° BBDC
    Close 6° ATDC

    Important Application Information:
    Rollin Thunder Hydraulic Roller cams are for street high-performance and racing applications only - not for heavy vehicles. Use with Edelbrock Performer RPM heads (or other aftermarket heads), adjustable valvetrain components, screw-in studs, high performance adjustable rocker arms and at least 9.5:1 compression ratio. Headers, high-energy ignitions, lower-than-stock rear gearing and a high-performance torque converter (in auto. transmission equipped vehicles) are necessary.

    INSTALLATION NOTES:
  • Do not use late model timing chain and gear sets that are designed for emission-controlled engines. They are machined in a retarded position and are not recommended for this camshaft installation. Use Performer-Link Timing Chain Gear Set 350-7800, 7802, 350-7890 Accu-Drive, or Hex-A-Just 350-7331.
  • Do not use dual valve springs. Use recommended Edelbrock Valve Springs 350-5703.
  • Must be used with a thrust button

  • Specifications:

    Engine Make/Size
    Chevy Small Block (262-400)
    RPM Range
    1500-5500
    Lifter Type
    Hydraulic Roller
    Int. Duration Advertised (Deg)
    280
    Exh. Duration @ .050 in. (Deg)
    222
    Exh. Duration Advertised (Deg)
    290
    Exhaust Valve Lift (in.)
    0.479
    Int. Duration @ .050 in. (Deg)
    212
    Intake Valve Lift (in.)
    0.462
    Usage
    Street/Performance
    Quantity
    Sold individually
    Lobe Separation (Deg)
    112
    Exhaust Valve Lift with Factory Rocker Arm Ratio (
    0.479
    Intake Valve Lift with Factory Rocker Arm Ratio (i
    0.462
    Valve Lift with Factory Rocker Arm Ratio
    0.462 int./0.479 exh.
    Advertised Duration
    280 int./290 exh.
    Computer-Controlled Compatible
    No
    Valve Springs Required
    Yes
    Cam Style
    Hydraulic roller tappet
    Exhaust Duration at 050 inch Lift
    222
    Intake Duration at 050 inch Lift
    212
    Duration at 050 inch Lift
    212 int./222 exh.
    Advertised Intake Duration
    280
    Advertised Exhaust Duration
    290
    Basic Operating RPM Range
    1,500-5,500
    Camshaft Gear Attachment
    3-bolt
    Manufacturer's Part Number:
    2208
    Shipping Weight:
    9.25
    Package Height:
    3.6
    Package Depth:
    24.9
    Package Width:
    3.6

    ROLLIN' THUNDER CAMSHAFTS

    Edelbrock Rollin' Thunder Camshafts are designed to improve horsepower and torque, produce a great sounding performance idle and provide sufficient vacuum at idle to support power accessories. Compared to conventional flat tappet hydraulic cams, Rollin' Thunder Camshafts have more aggressive lift profiles without excessive valve overlap that can compromise low-RPM drivability (reduced friction provided by roller tappets makes this combination of accelerated valve lift and reduced duration possible). Edelbrock Rollin' Thunder Camshafts are performance matched to Edelbrock Total Power Package components for proven performance.

    Rollin' Thunder Camshaft Features
  • Performance: Higher lift velocity and faster valve action increase horsepower and torque
  • Drivability: Great-sounding idle with excellent vacuum at idle to support power accessories
  • Durability: A roller tappet's small surface area + reduced friction + stronger camshaft material (hardend steel or iron) = long camshaft life
  • Environmental: Can use ILSAC GF-4 oil, which lowers engine emissions and does not require zinc or phosphate oil additives
  • Economy: Reduced contact friction between the lifter and camshaft increases fuel economy for better mileage potential

  • ROLLIN' THUNDER CAMSHAFT KITS
    These complete cam kits feature an Edelbrock Rollin' Thunder Hydraulic Roller Camshaft and Edelbrock Hydraulic Roller Lifters and Pushrods that are dyno-matched for a trouble-free installation. Each kit includes: camshaft, hydraulic roller lifters, lifter guides, pushrods, and hold-down spider (1987-Later applications only). Kits offer great performance gains when matched with the rest of the Edelbrock Total Power Package.
  • Complete kit gives you everything you need to upgrade your camshaft
  • Virtually eliminate break-in problems (no special break-in required over flat tappet cams)
  • Higher lift velocity and faster valve action produce superior horsepower and torque
  • Get more horsepower and torque without sacrificing idle quality and manifold vacuum
  • Reduced friction improves fuel economy

  • Does Edelbrock 2208 fit your vehicle?

    Narrow Results
    Filter By Year
    Filter By Make
    Filter By Model
    Filter By SubModel
    Filter By EngineType
    Filter By CC
    Filter By Liter
    Filter By Aspiration

    1985  CHEVROLET K20 PICKUP

    • CC: 5031
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1975  CHEVROLET CAMARO

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1985-1986  CHEVROLET K20 SUBURBAN

    • CC: 5031
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: SCOTTSDALE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1975  CHEVROLET EL CAMINO

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: CLASSIC
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1971-1972  GMC G35/G3500 VAN

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: RALLY
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975  CHEVROLET LAGUNA

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1973  CHEVROLET CAPRICE

    • CC: 5031
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: CLASSIC
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1981-1986  CHEVROLET G30 VAN

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: HI-CUBE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1971-1986  GMC G25/G2500 VAN

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: RALLY
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975  CHEVROLET CAMARO

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: LT
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1980  CHEVROLET C10 SUBURBAN

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: SILVERADO
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1980  GMC C1500 PICKUP

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 6.6
    • SubModel: HEAVY HALF
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1965  CHEVROLET CHEVELLE

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.4
    • SubModel: DELUXE
    • CUI: 327
    • EngineType: V8 ( 5.4 L / 327 )

    1975  CHEVROLET LAGUNA

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: S3
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1970  CHEVROLET BROOKWOOD

    • CC: 6556
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1974  GMC SPRINT

    • CC: 6556
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1975  CHEVROLET LAGUNA

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1975-1977  GMC C15 SUBURBAN

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: SIERRA CLASSIC
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1973  CHEVROLET CHEVELLE

    • CC: 5737
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • Aspiration: N
    • SubModel: DELUXE
    • Engine Vin: J
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1981-1986  GMC CABALLERO

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: AMARILLO
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1973-1974  CHEVROLET IMPALA

    • CC: 5737
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: T
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1972  CHEVROLET BISCAYNE

    • CC: 5737
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: L
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975  CHEVROLET CAMARO

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: RS
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1980  CHEVROLET CAMARO

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 4.4
    • SubModel: BASE
    • CUI: 267
    • EngineType: V8 ( 4.4 L / 267 )

    1970  GMC JIMMY

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1981-1986  CHEVROLET G20 VAN

    • CC: 5031
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: BEAUVILLE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1977-1978  GMC C15 SUBURBAN

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: HIGH SIERRA
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1980-1981  CHEVROLET CAPRICE

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 4.4
    • SubModel: CLASSIC LANDAU
    • CUI: 267
    • EngineType: V8 ( 4.4 L / 267 )

    1966  CHEVROLET C10 PICKUP

    • CC: 5358
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.3
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.3 L / 327 )

    1981-1986  CHEVROLET G30 VAN

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: BEAUVILLE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1972  CHEVROLET CHEVELLE

    • CC: 5737
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • Aspiration: N
    • SubModel: MALIBU
    • Engine Vin: J
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975  GMC G35/G3500 VAN

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • EngineType: ALL
    • SubModel: RALLY CAMPER SPECIAL

    1970  GMC G25/G2500 VAN

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1977-1979  CHEVROLET IMPALA

    • CC: 5031
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: LANDAU
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1967  CHEVROLET K20 SUBURBAN

    • CC: 5358
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.3
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.3 L / 327 )

    1975-1980  GMC K1500 PICKUP

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 6.6
    • SubModel: HIGH SIERRA
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1970-1971  CHEVROLET MONTE CARLO

    • CC: 6556
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1974-1975  CHEVROLET EL CAMINO

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1978-1979  OLDSMOBILE CUTLASS

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: VISTA CRUISER
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1975  CHEVROLET MALIBU

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: CLASSIC ESTATE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1980  CHEVROLET CAMARO

    • CC: 5031
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: RALLY SPORT
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1975-1978  GMC K15 SUBURBAN

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 6.6
    • SubModel: SIERRA GRANDE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1973  CHEVROLET LAGUNA

    • CC: 5737
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • Aspiration: N
    • SubModel: ESTATE
    • Engine Vin: T
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1982  BUICK LESABRE

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 4.4
    • SubModel: LIMITED
    • CUI: 267
    • EngineType: V8 ( 4.4 L / 267 )

    1985-1987  BUICK REGAL

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: LIMITED
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1973-1974  CHEVROLET MALIBU

    • CC: 5737
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: L
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1970-1973  CHEVROLET EL CAMINO

    • CC: 6555
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 6.6
    • SubModel: SS
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1972  CHEVROLET C20 PICKUP

    • CC: 5736
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975  CHEVROLET NOVA

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: POLICE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1972  CHEVROLET CHEVELLE

    • CC: 5737
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • Aspiration: N
    • SubModel: NOMAD
    • Engine Vin: J
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1967  GMC G25/G2500 VAN

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.4
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.4 L / 327 )

    1978-1980  CHEVROLET C10 PICKUP

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: SCOTTSDALE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1978-1980  GMC C1500 PICKUP

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 6.6
    • SubModel: SIERRA CLASSIC
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1981-1986  CHEVROLET K10 PICKUP

    • CC: 5031
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1975-1978  CHEVROLET G20 VAN

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 6.6
    • SubModel: SPORTVAN
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1977-1978  GMC C15 SUBURBAN

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: SIERRA CLASSIC
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1981  PONTIAC PARISIENNE

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 4.4
    • SubModel: SAFARI
    • CUI: 267
    • EngineType: V8 ( 4.4 L / 267 )

    1981-1986  CHEVROLET K30 PICKUP

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: CUSTOM
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1970-1972  GMC JIMMY

    • CC: 5031
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1972  GMC K35/K3500 PICKUP

    • CC: 5736
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979-1986  GMC C2500 PICKUP

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: SIERRA CLASSIC
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1975  OLDSMOBILE CUSTOM CRUISER

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 6.6
    • SubModel: PANEL
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1970  GMC G35/G3500 VAN

    • CC: 5736
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977  CHEVROLET MALIBU

    • CC: 5031
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: CLASSIC SPORT
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1977-1979  GMC K1500 PICKUP

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: HIGH SIERRA
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1975-1980  GMC K1500 PICKUP

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 6.6
    • SubModel: SIERRA CLASSIC
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1977-1979  GMC G25/G2500 VAN

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: VANDURA
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1973  GMC SPRINT

    • CC: 5031
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1977-1978  GMC C25/C2500 PICKUP

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: SIERRA CLASSIC
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1974  GMC K25/K2500 PICKUP

    • CC: 5737
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1973-1974  CHEVROLET CAPRICE

    • CC: 5737
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • Aspiration: N
    • SubModel: CLASSIC
    • Engine Vin: J
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1969-1971  CHEVROLET CAMARO

    • CC: 5736
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: RS
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977-1978  CHEVROLET CORVETTE

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • EngineType: ALL
    • SubModel: ALL

    1968  GMC C25/C2500 SUBURBAN

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.4
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.4 L / 327 )

    1970-1972  CHEVROLET EL CAMINO

    • CC: 6555
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1981  CHEVROLET K10 PICKUP

    • CC: 5031
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: CHEYENNE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1975  CHECKER MARATHON

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: AEROBUS
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977-1978  GMC K35 PICKUP

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: SIERRA GRANDE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1978-1979  OLDSMOBILE OMEGA

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975  CHEVROLET MONTE CARLO

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: S
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1976  GMC G15/G1500 VAN

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • EngineType: ALL
    • SubModel: RALLY

    1975-1978  GMC K25 PICKUP

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 6.6
    • SubModel: SIERRA CLASSIC
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1973  CHEVROLET NOVA

    • CC: 5031
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1982  CHEVROLET G30 VAN

    • CC: 5031
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: CHEVY VAN
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1984  CHEVROLET G20 VAN

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: BONAVENTURE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1986  GMC C3500 PICKUP

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1978  PONTIAC GRAND PRIX

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1973-1974  CHEVROLET MALIBU

    • CC: 5737
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • Aspiration: N
    • SubModel: ESTATE
    • Engine Vin: K
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1971  CHEVROLET BLAZER

    • CC: 5031
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1972  CHEVROLET C20 SUBURBAN

    • CC: 5031
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1972  GMC C35/C3500 PICKUP

    • CC: 5736
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977-1979  GMC K1500 PICKUP

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: SIERRA GRANDE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1975  GMC SPRINT

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 6.6
    • SubModel: HIGH SIERRA
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1970-1971  CHEVROLET G30 VAN

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1969-1971  GMC K25/K2500 PICKUP

    • CC: 5736
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1978-1982  GMC C1500 PICKUP

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.0
    • SubModel: STREET COUPE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1982-1986  CHEVROLET C10 SUBURBAN

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979-1986  CHEVROLET C30 PICKUP

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1981  CHEVROLET K10 SUBURBAN

    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • EngineType: ALL
    • SubModel: CUSTOM

    1972  GMC K25/K2500 PICKUP

    • CC: 5736
    • Fitment_Note: For Use On Pre-Pollution Controlled Vehicles (PPCV)~Idle Vacuum at 1000 RPM - 16 inch~Matched w/Performer EPS Intake 2716/Performer Carb 1407~And Performer E-Tech Head 60975~This Combo Produces 363hp and 405 ft.-lbs. of Torque~Matching Edelbrock Roller Tappet Lifter Set 97423
    • Liter: 5.7
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: E
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )
    *Not legal for sale or use on pollution-controlled motor vehicles
    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.

    Tools:

    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.