Edelbrock Performer Aluminum Cylinder Head for Ford 5.0L/5.8L
350-60379





Items You Need
Performer Aluminum Cylinder Heads - Complete

50-state street legal Performer 5.0/5.8L heads are direct bolt-on heads for 1982-95 5.0L and 5.8L (351-W) V8s originally equipped with pedestal mount rocker arms. When combined with the Total Power Package on a 1993 5.8L engine, torque improved more than 80 ft/lbs over stock. These heads accept pedestal mount rocker arms and valve trains as used on 1982 and later 5.0 Liter V8s. These heads will not accept rail rockers. Note: 1986 5.0L must have pistons notched for clearance.
Note: Aftermarket 286/302 heads including Brodix, Edelbrock, Ford Motorsport and World Products with 1/2'' bolt hole diameters (block is 7/16'' bolt hole), except 397-M-6049-P303 (''P'' style head). Require 350-9680 inserts with 350-8552 head bolt or 350-9680 insert with 070-154-3601. If head studs are desired use 070-154-4005 (includes inserts).
Tech Tip: To gain more spark plug clearance, Edelbrock recommends using Champion RC Series plugs such as the RC12YC (P/N 192-49776). They are 0.230'' shorter than a conventional spark plug and have a 5/8'' hex for easier access.
Valve Lift | Intake | Exhaust |
.100'' | 72 | 57 |
.200'' | 131 | 105 |
.300'' | 185 | 131 |
.400'' | 214 | 156 |
.500'' | 223 | 168 |
.600'' | 226 | 175 |
.700'' | N/A | N/A |
Flow Numbers as tested by Edelbrock's SuperFlo SF-1020 flow bench @ 28'' H2O |
Specifications:
Edelbrock Performer Series aluminum cylinder heads are specifically designed for performance street use. These heads are 50-state legal and provide excellent bolt-on performance for 1982-95 5.0L and 5.8L Ford V8 engines. These heads are designed to accept 1982-95 5.0L V8 pedestal mount rocker arms and valvetrain.
Note: 1986 5.0L pistons must be notched for valve clearance. These heads will not accept rail rockers. The 5.0L requires Head Bolt Bushings (350-9680).
All bare heads come with valve guides and seats installed, but these heads will require final sizing and a valve job to match the valves being used.
Combustion Chamber Colume | 60cc |
Intake Runner Volume | 170cc |
Exhaust Runner Volume | 60cc |
Intake Valve Diameter | 1.90" / 2.02" |
Exhaust Valve Diameter | 1.60" |
Valve Stem Diameter | 11/32" |
Valve Guides | Manganese Bronze |
Deck Thickness | 5/8" |
Valve Spring Diameter | 1.46" |
Valve Spring Maximum Lift | .575" |
Rocker Stud | N/A |
Guideplate | N/A |
Pushrod Diameter | 5/16" |
Valve Angle | 20° |
Exhaust Port Location | Stock |
Spark Plug Fitment | 14mm x 3/4 reach, flat gasket seat |
Made In The USA!
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.