
Edelbrock Performer RPM Camshaft Kit for Small Block Oldsmobile 350-403
350-7112
Edelbrock 7112 Details
Oldsmobile
Operating Range 1500-6500 RPM Duration Advertised 290° Intake/300° Exhaust Duration @ .050'' 224° Intake/234° Exhaust Lift @ Valve .496'' Intake/.520'' Exhaust Lift @ Cam .310'' Intake/.325'' Exhaust Lobe Separation Angle 112° Intake Centerline 107° Intake Timing @ .050" Â Open 5° BTDC
 Close 39° ABDCExhaust Timing @ .050"  Open 54° BBDC
 Close 0° ATDCVacuum @ 1000RPM Idle 12"
Specifications:
For high-performance street applications, Performer RPM Camshafts provide power from 1500 to 6500 RPM. These flat-tappet hydraulic lifter cams are dyno matched to Edelbrock's Performer RPM Manifolds for high-RPM horsepower while maintaining acceptable low-end torque. With 10-12 inches of manifold vacuum at idle, these cams have more lift and duration than most street cams. *Lifters included
Does Edelbrock 7112 fit your vehicle?
1978 BUICK RIVIERA
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: LXXV ANNIVERSARY EDITION
- Engine Vin: R
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1978-1979 PONTIAC BONNEVILLE
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: BASE
- Engine Vin: R
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1973 CHEVROLET MONTE CARLO
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1976-1977 PONTIAC LEMANS
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: BASE
- Engine Vin: P
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1975 CHEVROLET MALIBU
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: CLASSIC ESTATE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1977 PONTIAC FIREBIRD
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: FORMULA
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1961-1964 OLDSMOBILE FIESTA
- CC: 6458
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 6.5
- SubModel: BASE
- CUI: 394
- EngineType: V8 ( 6.5 L / 394 )
1980 OLDSMOBILE CUTLASS
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1968-1971 OLDSMOBILE F85
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1957 OLDSMOBILE GOLDEN ROCKET 88
- CC: 6081
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 6.1
- SubModel: BASE
- CUI: 371
- EngineType: V8 ( 6.1 L / 371 )
1975 CHEVROLET MONTE CARLO
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: S
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1979-1980 CADILLAC ELDORADO
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BIARRITZ
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1971-1974 OLDSMOBILE CUTLASS
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: S
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1972 CHEVROLET K30 PICKUP
- CC: 5736
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: BASE
- Engine Vin: H
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1978-1980 BUICK ELECTRA
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: PARK AVENUE
- Engine Vin: R
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1977 PONTIAC CATALINA
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: SAFARI
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1976-1977 OLDSMOBILE CUTLASS
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: VISTA CRUISER
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1978-1980 PONTIAC CATALINA
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: SAFARI
- Engine Vin: R
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1978-1980 OLDSMOBILE 98
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: LUXURY
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1975 CHEVROLET CAMARO
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: LT
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1957-1958 OLDSMOBILE FIESTA
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- EngineType: ALL
- SubModel: ALL
1975-1976 OLDSMOBILE OMEGA
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1980 OLDSMOBILE CUTLASS SUPREME
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1978 BUICK RIVIERA
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 6.6
- SubModel: BASE
- CUI: 403
- EngineType: V8 ( 6.6 L / 403 )
1975 CHEVROLET CAPRICE
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: CLASSIC SPORT
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1976 OLDSMOBILE OMEGA
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BROUGHAM
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1976-1977 CADILLAC SEVILLE
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- EngineType: ALL
- SubModel: ALL
1974 OLDSMOBILE CUTLASS SUPREME
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: CRUISER
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1977 BUICK CENTURY
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 6.6
- SubModel: CUSTOM
- CUI: 403
- EngineType: V8 ( 6.6 L / 403 )
1976 BUICK CENTURY
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- EngineType: ALL
- SubModel: INDIANAPOLIS 500 PACE CAR
1974 CHEVROLET CAPRICE
- CC: 5736
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: ESTATE
- Engine Vin: H
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1970-1971 OLDSMOBILE CUTLASS SUPREME
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1973 CHEVROLET MALIBU
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: ESTATE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1969 OLDSMOBILE F85
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1977 OLDSMOBILE CUTLASS SUPREME
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 6.6
- SubModel: BASE
- CUI: 403
- EngineType: V8 ( 6.6 L / 403 )
1972 CHEVROLET G10 VAN
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: SPORTVAN
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1977 PONTIAC FIREBIRD
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 6.6
- SubModel: BASE
- CUI: 403
- EngineType: V8 ( 6.6 L / 403 )
1969 OLDSMOBILE DELTA 88
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1972 CHEVROLET BISCAYNE
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1972 CHEVROLET C20 SUBURBAN
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: BASE
- Engine Vin: H
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1975 CHEVROLET IMPALA
- CC: 5735
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1977 PONTIAC GRAND LEMANS
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 6.6
- SubModel: SAFARI
- CUI: 403
- EngineType: V8 ( 6.6 L / 403 )
1972 CHEVROLET CAMARO
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: RS
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1970-1971 OLDSMOBILE DELTA 88
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1975 PONTIAC VENTURA
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: BASE
- Engine Vin: J
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1971 OLDSMOBILE DELTA 88
- CC: 5733
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: CUSTOM
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1969-1971 OLDSMOBILE CUTLASS
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1977 OLDSMOBILE OMEGA
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: BASE
- Engine Vin: R
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1978-1980 OLDSMOBILE DELTA 88
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: ROYALE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1973-1974 BUICK CENTURY
- CC: 5736
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1976 PONTIAC GRAND LEMANS
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1977 PONTIAC LEMANS
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 6.6
- SubModel: BASE
- CUI: 403
- EngineType: V8 ( 6.6 L / 403 )
1976 PONTIAC VENTURA
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1980 OLDSMOBILE CUTLASS
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BROUGHAM
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1972 CHEVROLET CHEVELLE
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: GREENBRIER
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1968-1970 OLDSMOBILE DELTA 88
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: CUSTOM
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1957 OLDSMOBILE 88
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- EngineType: ALL
- SubModel: ALL
1975 BUICK APOLLO
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1972-1974 PONTIAC PARISIENNE
- CC: 5736
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: BASE
- Engine Vin: H
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1978-1979 BUICK ELECTRA
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 6.6
- SubModel: 225
- CUI: 403
- EngineType: V8 ( 6.6 L / 403 )
1977 BUICK CENTURY
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1977 BUICK ELECTRA
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- EngineType: ALL
- SubModel: 225
1975 CHEVROLET MALIBU
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1972 GMC C35/C3500 PICKUP
- CC: 5736
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: BASE
- Engine Vin: H
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1972 CHEVROLET CHEVELLE
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: NOMAD
- Engine Vin: H
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1972 CHEVROLET C30 PICKUP
- CC: 5736
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: BASE
- Engine Vin: H
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1977 PONTIAC GRAND PRIX
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: LJ
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1958 OLDSMOBILE 98
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- EngineType: ALL
- SubModel: ALL
1972 GMC C1500 PICKUP
- CC: 5736
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1971 OLDSMOBILE DELTA 88
- CC: 5733
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: CUSTOM
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1977-1979 OLDSMOBILE DELTA 88
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 6.6
- SubModel: BASE
- CUI: 403
- EngineType: V8 ( 6.6 L / 403 )
1972 GMC K25/K2500 PICKUP
- CC: 5736
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: BASE
- Engine Vin: H
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1969 OLDSMOBILE CUTLASS
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1977 OLDSMOBILE OMEGA
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: SX
- Engine Vin: R
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1969-1971 OLDSMOBILE CUTLASS SUPREME
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1977 PONTIAC GRAND LEMANS
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: SAFARI
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1977 PONTIAC GRAND PRIX
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 6.6
- SubModel: SJ
- CUI: 403
- EngineType: V8 ( 6.6 L / 403 )
1957 OLDSMOBILE STARFIRE
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- EngineType: ALL
- SubModel: ALL
1969 OLDSMOBILE DELTA 88
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1978-1980 BUICK ELECTRA
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: LIMITED
- Engine Vin: R
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1959 OLDSMOBILE 98
- CC: 6081
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 6.1
- SubModel: BASE
- CUI: 371
- EngineType: V8 ( 6.1 L / 371 )
1972 CHEVROLET CAPRICE
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1977 OLDSMOBILE OMEGA
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: BROUGHAM
- Engine Vin: R
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1975 OLDSMOBILE CUTLASS
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: S
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1970-1971 OLDSMOBILE CUTLASS
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1975-1976 BUICK SKYLARK
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: SR
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1979 OLDSMOBILE CUTLASS CALAIS
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1971 OLDSMOBILE DELTA 88
- CC: 5733
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: CUSTOM
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1973-1974 CHEVROLET MALIBU
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1977 OLDSMOBILE CUTLASS SUPREME
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BROUGHAM
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1977 BUICK CENTURY
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: BASE
- Engine Vin: J
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1975 CHEVROLET CAPRICE
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: CLASSIC
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1972 GMC C25/C2500 PICKUP
- CC: 5736
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: BASE
- Engine Vin: H
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1972-1974 OLDSMOBILE VISTA CRUISER
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1975-1976 BUICK REGAL
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1966 OLDSMOBILE F85
- CC: 6555
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 6.6
- SubModel: HOLIDAY
- CUI: 400
- EngineType: V8 ( 6.6 L / 400 )
1969 OLDSMOBILE DELTA 88
- CC: 5737
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- Aspiration: N
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1977-1978 BUICK LESABRE
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 6.6
- SubModel: CUSTOM
- CUI: 403
- EngineType: V8 ( 6.6 L / 403 )
1973-1974 BUICK REGAL
- CC: 5736
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1978-1980 OLDSMOBILE 98
- Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads~Idle Vacuum at 1000 RPM - 12 inch
- Liter: 5.7
- SubModel: REGENCY
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
- bvseo-2.0.1.5
- bvseo-true
- bvseo-j
- bvseo-CLOUD
- bvseo-50ms
- bvseo-REVIEWS
- bvseo-PRODUCT
- bvseo-getContent
- bvseo-msg: The resource to the URL or file is currently unavailable.;
- bvseo-2.0.1.5
- bvseo-true
- bvseo-j
- bvseo-CLOUD
- bvseo-44ms
- bvseo-QUESTIONS
- bvseo-PRODUCT
- bvseo-getContent
- bvseo-msg: The resource to the URL or file is currently unavailable.;
Items You Need
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.