Evapo-Rust Rust Remover and Rust-Block Rust Inhibitor are environmentally safe products that have been developed using extensive research. They are formulated to be water soluble, biodegradable, non corrosive and safe on skin. Best of all these products are designed to be used indoors, they are non flammable and do not emit a bad odor or toxic fumes.
Evapo-Rust - This rust remover is designed to be simple to use with no special equipment required. Just fill a container with enough Evapo-Rust solution to fully immerse the item and it removes rust in minutes without scrubbing. Evapo-Rust will not harm unrusted steel and is safe on other metal surfaces. There is no need to worry about damaging plastic, PVC or Viton rubber components and it will not affect most painted surfaces.
Rust-Block - Will inhibit rust formation on Evapo-Rust treated metal for up to six months. It can be used on all ferrous and non-ferrous metals and has been tested to work very well on copper and brass. Since it is water based it will not harm coatings, polymers, plastics or painted surfaces. When you are ready to apply paint or powder coat to your project simply wash Rust-Block off with water and dry prior to coating.
JEGS Easy Kits are designed by JEGS professionals to help you get all the parts you need for your restoration project.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.