Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info NeededRoller Pilot Bearing Fits 289/302/351C/351W Crankshafts
Ships Today
Lowest Price Guarantee- Roller Pilot Bearing
- Fits 289/302/351C/351W Crankshafts
- Designed for 0.669" Diameter Input Shaft
- Production roller pilot bearing fits 289, 302, 351C and 351W crankshafts
- Designed for 0.669 diameter input shaft
NOTE: Pre-greased - do not add extra grease. Clutch and bearing damage may occur
These Ford Racing roller pilot bearings are direct replacements. When you install a new clutch, just pick up one of these to obtain less friction and longer life out of your clutch assembly.
- Roller Pilot Bearing
Ford Roller Pilot Bearing
Ford Racing Transmission Input Shaft Roller Pilot Bearings are the perfect solution to reduce friction and heat on your input shaft and crankshaft. The pilot bearing will make shifting at high RPM's easier and will increase the life of your current or newly installed clutch. These sealed pilot bearings are pre-greased and ready to install.
Show More
To insure a long life out of your pilot bearing make sure your bell housing is properly indexed to the crankshaft. Bearings do not run properly for very long if you put excessive side loading on them. Roller bearing are also only recommended for later model transmissions that's reduced tolerances require ATF for lubrication rather than gear oil. Older style transmissions with increased tolerances may also put excessive side loading on the bearing drastically reducing the bearings service life. .
Features
- Reduces Heat and Friction
- Makes High RPM Shifting Easier
- Recommended for Late Model ATF Fluid Transmissions
ITEM YOU MAY ALSO CONSIDER
![Clutch Pilot Bearing Ford, Mercury [Needle Roller]](https://www.jegs.com/images/mini_200/500/555/555-60108.jpg)
JEGS
Clutch Pilot Bearing Ford, Mercury [Needle Roller]
Part Number : 555-60108
JEGS
Part Number : 555-60108
