And Expert Tech Advice!
Category
Top Categories
All Categories
Harwood Aero I Scoop Overall: 40-1/2" L x 12" H
487-3160
Specifications:
Harwood's line of Aero Scoops has something for everyone. Each scoop is hand finished then covered with an ultra-smooth gel coat so prep time for painting is minimal. Remember, 1" air bypass holes should be drilled in the rear of the air pan to allow air to flow through the scoop to prevent air pressure build-up that could damage the scoop when the carb is closed at engine shutdown or deceleration.
Look No Further for the Best Fiberglass Hood Scoops Available
Aero
The unique rear section of the free-standing scoop is designed to allow windshield wiper clearance or use of a separate (from body) cowl panel.
Aero Mini
A smaller version of the popular Aero Series.
Aero MOD-I
Designed to meet the 5" hood scoop requirements for Super Stock and Comp Eliminator classes.
Aero Pro
The windshield-length Aero scoops are designed to be mounted against the windshield for improved aerodynamics and are necessary for cars with substantial engine set-back. The open rear section has an angle to suit most applications.
Aero Pro Stock-IV
All new design features reduced air inlet and narrow design for improved aerodynamics.
Tri-Aero
All new design features reduced air inlet and narrow design for improved aerodynamics.
Aero Force I
Provides maximum airflow with low wind resistance for unmatched performance.
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
