The JEGS 555-52118 12 in. dual electric cooling fan assembly works to keep your engine temperature in check. Capable of working in a pusher or puller capacity, this unit will flow 3,100 cfm cooling even the hottest running engines. Sold as a complete unit, this assembly includes the shroud, fans, and pigtails saving you the worry about compatibility. Don't let poor radiator cooling allow your engine to overheat.

JEGS 555-52118 Dual Electric Fan Features:

• 3100 cfm of airflow to help cool most vehicles
• Reversible push/pull s-blade design
• 26.6 Amp Draw (13.3 per fan)
• 225 Watt motors
• Overall dimensions: 26 1/2 in. W x 15 3/8 in. H x 3 3/4 in. D
• Shroud dimensions (without fans): 26 1/2 in. W x 15 3/8 in. H x 1 1/4 in. D
• Rubber seal eliminates vibration and increases airflow
• Two sealed motors tested in accordance with DIN EN 60529, dust and water resistant to IP68
• Dual shrouded quiet, S-blade design – works as a puller
• All glass-filled nylon construction
  
• Includes fans, shroud, and pigtails

JEGS 555-52118 Dual Electric Fan Note:

• When mounting the fan assembly as a pusher or puller make sure the fan blades are in the correct orientation, as described in the installation guide. 

FAQ

What gauge wire for dual electric fans?

• For the JEGS dual fan setup (such as the 555-52118), use 10-gauge wire for optimal performance. It ensures proper current flow, preventing voltage drop and maximizing cooling efficiency.

Should fans be connected in series or parallel?

• JEGS recommends wiring dual electric fans in parallel for independent operation. This ensures each fan receives full voltage, optimizing cooling performance in diverse conditions.

Can I wire DC fans in series?

• No, JEGS advises against wiring DC fans in series. For the 555-52118 dual fan setup, connect them in parallel to maintain proper voltage and ensure consistent and efficient cooling for your application.