JEGS 555-44200 Holeshot RC Stadium Truck Special Notes:

• The Holeshot RC Stadium Truck does not come with a battery or a charger. These units must be purchased separately. See Below. This truck is compatible with NiMH and 2S-3S LiPo batteries.
• JEGS RC Vehicles come set up for a LiPo Battery. When upgrading to a NiMH Battery you will need to adjust the pin location on your motor to the NiMH Battery setting during installation or serious damage may occur to your unit. See the Illustration in the images above for the correct pin adjustment.

• Chargers
  • 60W Rapid balance charger - 555-45000
  • 20W Sport balance charger - 555-45010
• Batteries
  • Nickle-Metal Hydride
    • NIMH 8.4V-3K MAH 7-Cell, Hump-Pack - 555-45050
  • Lithium-Polymer
    • LIPO 2S 7.4V 5KMAH 2-Cell - 555-45080
  • The LIPO 3S 11.1V 5KMAH 35C battery DOES NOT FIT.
• The Pistol-Grip Controller requires 4 AA batteries not included.

JEGS Holeshot RC Stadium Truck Replacement Parts CLICK HERE

JEGS RC Batteries CLICK HERE

JEGS RC Battery Chargers CLICK HERE

JEGS RC Battery Charger Accessories CLICK HERE

Test your offroad RC skills with the JEGS 44200 Holeshot Stadium Truck. This stadium truck focuses on performance and personalization using a high-torque electric motor and fully-customizable control settings.

Designed to win, the Holeshot's handling benefits from front and rear independent suspension, coil-over shocks, and aggressive tire tread. The orange and black paintwork with realistic lights, windows, and grill help it stand out from the crowd. The rear wing serves to increase traction and enhance the truck's design.

JEGS 555-44200 Holeshot RC Stadium Truck Features:

• Dimensions
  • Overall: 16.220 in. L x 12.590 in. W x 6.960 in. H
  • Ground clearance: 1.960 in.
  • Battery tray dimensions: 5.500 in. L x 1.875 in. W x 1 in. H
• Wheels:
  • Front: 2.200 in. D x 2 in. W
  • Rear: 2.200 in. D x 2 in. W
• Weight: 4.190 lbs.
• Tires:
  • Front: Grooved (3.250 in. D x 2.250 in. W)
  • Rear: Knobby (3.375 in. D x 2.250 in. W)
• Servo
  • 6kg Servo
  •  Torque
    • 4.8V: 10.0 kg 138.8 oz./in.
    • 6V: 12.0 kg 166.7 oz./in.
  • Speed
    • 4.8V: 0.16 sec/60 degrees
    • 6V: 0.14 sec/60 degrees
• ESC (Electronic Speed Control)
  • Waterproof (With the exception of prolonged submergence)
  • Dustproof
  • Built-in capacitor
  • Programmable with jumpers
• Drivetrain
  • Rear mounted engine
  • Axle shafts: 5mm hardened steel
  • Gearbox:
    • Performance slipper system
    • Changeable gearing
    • High-efficiency design
    • Precision metal ball bearings
  • Bevel gear type differential
  • Sealed axle housings
  • Slipper clutch
• Chassis
  • Double wishbone suspension front and rear
  • Multiple shock mounting points to adjust suspension
  • Sealed compartment for the receiver
  • Philips screw hardware used throughout
  • Quick-release velcro battery holder
  • 2 mounting posts to secure the body
  • Impact-resistant plastic composite
• Suspension
  • Shocks: (4) Oil-filled big-bore coil-overs (1 per corner)
    • Shock body: 10 mm OD
    • Shaft: Hardened polished steel (3 mm OD)
    • Performance Spring Rate
  • Axles: Independent front and rear
• Electronics
  • Servo: 12 kg
  • Electronic Safety Features
    • Over-heating prevention
    • Throttle signal loss protection
• Pistol-Grip Controller
  • Requires 4 AA Batteries Not Included 
  • Frequency: 2.4 GHz
  • Adjustments:
    • Security
      • Lock/unlock 
    • Steering
      • Servo reversal (Reverse steering control)
      • End-point (Increase or decrease maximum steering angle)
      • Digital trimming (Adjusts steering to neutral position when not moving)
      • Dual-rate (On-the-fly adjustments)
    • Throttle
      • Throttle reverse (Reverse controls)
      • End-point (Increase or decrease maximum throttle input)
      • Braking (Increase or decrease braking force)
      • Digital trimming (Adjust the throttle in the neutral position when not moving)