Items You Need
Ratings |
---|
Price |
Brand |
Ford FE Series Intake Manifolds
JEGS 555-513096 Single Four-Barrel Dual-Plane High-Rise Intake Manifold in Black Finish
Designed for Ford 332-428 FE Series Engines. This intake manifold allows you to use a square-bore 4150/4160 Holley-style carburetor. The dual-plane constant cross-sectional area design builds low-end and mid-range acceleration. This cast aluminum unit makes the perfect intake manifold if you're looking for additional torque and horsepower over a stock four-barrel manifold.
JEGS 555-513096 Dual-Plane Intake Manifold Features:
- Fits Ford 332, 352, 360, 390, 406, 410 & 428 FE Series Engines
- Dual-Plane High-Rise design for optimum fuel distribution
- Square Bore Holley style 4150/4160 Carburetor bolt pattern
- Intake port exit dimensions: 1.170 in. W x 1.980 in. H
- Manifold height: (A) 4.875 in., (B) 6 in. = Carburetor Pad Height: 5.4375 in.
- Click here to determine Carburetor pad height
- 1 Front 3/8 in. NPT water outlet port
- 1 Front 1/2 in. NPT water outlet port
- 1 Front 3/8 in. NPT vacuum port
- Accepts factory-style water neck & coolant tubes
- No exhaust crossover passage
- Intake gasket port matching is recommended for optimum performance
Additional Recommended Items (Sold Separately):
- Recommended Intake Gasket 555-210300
- Recommended Valve Cover Gaskets 555-210370
- Recommended Intake Manifold Bolts 350-8507
- JEGS Bandit Series EFI Throttle Body System
- Carburetor Fuel Inlet Lines & Fittings
- Carburetor Spacers
- Fuel Filters
- Carburetor Linkage, Choke Kits & Components
JEGS Carb Recommendations/Notes | ||||
Carburetors | ||||
570 CFM | 670 CFM | 770 CFM | ||
Up to 300 HP | 300 to 400 HP | 400 to 500 HP | ||
Manual Choke | 510-0-81570 | 510-0-81670 | 510-0-81770 | |
Electric Choke | 510-0-80570 | 510-0-80670 | 510-0-80770 | |
JEGS Carburetor Studs | ||||
555-15840 | 1-1/2" Studs | Suggested for carb and gasket only | ||
555-15841 | 2" Studs | Suggested for carb and 1/2" spacer | ||
555-15842 | 2-1/2" Studs | Suggested for carb and 1" spacer | ||
555-15846 | 3-1/2" Studs | Suggested for carb and 2" spacer | ||
JEGS Carburetor Base Gaskets | ||||
555-16100 | Open | |||
555-16105 | 4-Hole |
Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
Specifications:
Where is this part manufactured?
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.