- Total Overall Height: 1.899"
- Baffle Diameter: 1.375"
- Height Inside Valve Cover: 0.710" (before o-ring compression)
JEGS Vented AN Breather Fittings allow you to install an AN fitting into your valve cover, or other flat surface, without any welding. Simply drill the proper size hole and install. Can be used to connect to a vacuum pump, a crank case evacuation system, or other accessories. The special lock feature insures that the Vented AN Breather Fitting stays is place. The o-ring seal provides a leak-proof installation. Available in -10AN and -12AN fitting sizes. 1/pkg.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.