Type II Pump
The JEGS 60714 GM Type II power steering pump and reservoir assembly lets you restore your vehicle's steering quality while dressing up the engine bay. Serving a twofold purpose, the fabricated aluminum reservoir eliminates the crack concerns found with plastic tanks while at the same time adding a custom look. The pump is designed with a standard flow rate to give a like-new feel. Don't let a worn pump assembly ruin your driving experience.
- Overall dimensions: 7 1/2 in. W x 7 5/8 in. H x 4 1/8 in. (including pulley shaft)
- Shaft outside diameter (OD): 0.663 in.
- Shaft threads: 3/8 in. -16
- Mounting holes thread size: M8-1.25
- Pressure port: M16-1.5 (for -10 AN fitting)
- TIG-welded aluminum reservoir (standard capacity)
- Billet aluminum reservoir cap
- Aluminum power steering pump housing
- Inlet fitting: 6 AN
- Outlet Fitting: 6 AN
- Pulley attachment: Press-fit
- The pump is a stock replacement with standard 6 AN and 10 AN fittings
- Included fittings
- (1) 90-Degree [1/4 NPT male to barb]
- (1) Straight [1/4 NPT male to 6 AN male]
- (1) Pipe plug [1/4 NPT]
- (1) O-ring
Note: This assembly does not include the power steering pump pulley or installation hardware.
Will this work with Speedmaster serpentine Kit SKU # 746-1-415-001-01?
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.