JEGS 80778

Clearance your fender lips without having to remove the wheels with fender forming pliers. This tool allows you to achieve the results of a fender roller in a handheld form. The large non-marring pad supports the pliers on the outside of the fender, while the smaller pad is used to slowly bend the lip upward. To ensure that your paint isn't damaged during the process, you should use a heat gun and get the paint between 120-140 degrees Fahrenheit. Bend in small increments as you work your way around the fender.

Due to the design of this tool, it will only work for single layer fender lips, commonly the front fenders. Double layer lip, typically rear, fenders will require the use of a fender roller to deal with the increased force necessary to bend twice as much metal.

Increase safety and cost effectiveness by using this tool to prevent avoidable tire damage. Other uses include crimping replacement door skins to the frame and straightening bent metal edges. 

Features

• Overall Dimensions: 12 3/8 in. Length x 3 1/8 in. Width x 7/8 in. Thickness
• Large (Outer) Pad Size: 1 3/4 in. Length x 7/8 in. Width
• Small (Inner) Pad Size: 3/8 in. Length x 7/8 in. Width
• Replaceable small (inner) non-marring rubber pad
• Maximum Jaw Opening: 2 1/8 in.
• 8 in. Arms for better leverage