Unrivaled Customer Service
And Expert Tech Advice!  
Same Day Shipping Before 11 PM ET
My Cart
Shop By Vehicle
Shop By
Close Menu
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates

JEGS 92-Piece Port & Polish Kit Made in the USA

JEGS 80900


made in usa
jegs shipping
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
JEGS 92-Piece Port & Polish Kit Made in the USA $33.99
92-Piece Port & Polish Kit
  • Made in the USA

  • JEGS 80900 Details


      Taper Threaded Mandrels
    • (1pcs.) 1/8" x 3/4" x 1/4"
    • (1pcs.) 1/8" x 1" x 1/4"

      Straight Cartridge Rolls
      1/4" x 1" x 1/8"
    • (15pcs.) 80 Grit
    • (15pcs.) 120 Grit
      1/4" x 1-1/2" x 1/8"
    • (4pcs.) 60 Grit
    • (10pcs.) 80 Grit
    • (10pcs.) 120 Grit
      3/8" x 1" x 1/8"
    • (10pcs.) 80 Grit
      3/8" x 1-1/2" x 1/8"
    • (6pcs.) 80 Grit
    • (6pcs.) 120 Grit
      1/2" x 1" x 1/8"
    • (6pcs.) 80 Grit
      1/2" x 1-1/2" x 1/8"
    • (4pcs.) 80 Grit
    • (4pcs.) 120 Grit

    Now you can port your intake or cylinder heads, and polish any aluminum or cast iron finish to show-car perfection with this 92-piece kit. The Port and Polish Kit includes 90 cartridge rolls in various sizes/shapes of 120, 80, and 60-grit paper; two mandrels of 1/8" x 3/4" x 1/4" and 1/8" x 1" x 1/4"; and storage case. Designed for use with electric drill motors only.

    80900 is rated 4.7 out of 5 by 11.
    Rated 5 out of 5 by from As advertised As advertised. Nice assortment. Good count for cost. Mandrels worked fine.
    Date published: 2017-03-10
    Rated 5 out of 5 by from Great port and polish kit I do most of my porting on small two stroke cylinders. This kit has all the correct size pieces that I need.
    Date published: 2017-03-08
    Rated 5 out of 5 by from Numerous applications possible! I've used abrasive roll sets like this on so many applications that involve anything with a cast surface, aluminum or cast iron such as cylinder heads, (iron and aluminum), lifter valleys on engine blocks, and exhaust work. Also deburring any metal material type. On aluminum, just be sure to use a lot of grinder's grease to prevent loading up on the roll. If you do a lot of smoothing, deburring, contouring work it's always best to stock up on 3 or 4 of these kits, especially with rough cast iron surfaces and sharp edges to debur edges of exhaust pipe, because you can go through them fairly quickly, but they work great nonetheless. When possible to conserve the rolls, use carbide burrs and grinding stones to do the initial prep and save the sanding rolls to do the final finish work. The sanding rolls are essential to any tool box! These fit the bill to a tee.
    Date published: 2017-03-02
    Rated 5 out of 5 by from Great Tool Fast Delivery Purchased for a technician at our shop, he absolutely loves them. Could use a free one to try out for myself to leave a better review. LOL But Jegs is great, delivery times are unbelievably fast. We will most definetly order from them in the future.
    Date published: 2016-10-31
    Rated 5 out of 5 by from Nice kit. Works great in all the small spots. Nice storage case, great price on the number of pieces.
    Date published: 2015-12-22
    Rated 5 out of 5 by from Worked great Only thing missing would be a longer Mandrel. The competitor's P&P Kit had a flap wheel mandrel, but don't need it for an extra $20. Just uncoil a bit of the sanding drum - it acts just as a flapwheel would.
    Date published: 2015-10-19
    Rated 4 out of 5 by from Not for beginners I have ported and polished in the past but have used stones, emery cloth/paper and various polishing compounds. All of the P&P projects I have done up to now now have been on much smaller scale and primarily in aluminum. This is the first time I have done a project on cast iron and as complex (a V6 stock exhaust manifold) and certainly had its' share of difficulties. A couple of things that I thought would be useful and was able to work around was (A. the shafts on the mandrels were to short more often than not-so an extension and a flex shaft for the really hard to reach and blind areas would be helpful and (B. provide a site or a tutorial on how to properly use what you have and what a properly finished P&P should look like. It may sound silly to those that have done this before-but proper execution can either make or break your project.
    Date published: 2017-10-04
    Rated 4 out of 5 by from worth the money I bought to clean a motorcycle fuel tank where the pet cock goes in it work well
    Date published: 2017-04-11
    • y_2018, m_6, d_21, h_5
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
    • cp_1, bvpage1
    • co_hasreviews, tv_2, tr_9
    • loc_en_US, sid_10001_10001_339930, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs
    Items You Need
    Some parts are not legal for use in California or other states with similar laws / regulations