0
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories


Hi, ! (Not you?)
My Account
1-800-345-4545
Track Order
Help
Magnaflow 94002

Magnaflow Pre OBD-II Universal Catalytic Converter Body Shape: Oval, Dual/Single

642-94002

Free Shipping Ships directly from the manufacturer

$108.99
Magnaflow Pre OBD-II Universal Catalytic Converter Body Shape: Oval, Dual/Single $108.99
QTY
Pre OBD-II Universal Catalytic Converter
  • Body Shape: Oval, Dual/Single
  • Inlet/Outlet: 2"
  • Width: 7"
  • Body Length: 12"
  • Overall Length: 14.75"
  • Single O2 Port
  • Specifications:

    Body Length (in.)
    12
    Overall Length (in.)
    13.5
    Inlet Size (in.)
    2
    Outlet Size (in.)
    2
    Material
    Stainless Steel
    Emission
    Non-California (49-State)
    Core Substrate Material
    Ceramic
    Converter Body Size
    OEM
    Outlet Quantity
    1
    California Air Board Approved
    No
    Universal Or Specific Fit
    Universal
    Catalytic Converter Format
    Pre-Catalytic Converter and Main Catalytic Converter
    Oxygen Sensor Location
    Pre Converter
    CAT Converter Air Tube Adapter
    Not Air Tube Kit Adaptable
    Recommended Use
    Converter
    AIR Tube
    No
    Body Size
    OEM
    California Legal
    No
    Converter Overall Thickness (in.)
    4
    Converter Overall Width (in.)
    6.5
    Converter Style
    3-way
    GVW (lbs.)
    6,000
    Heat Shield
    Yes
    Inlet Attachment
    Slip fit
    Outlet Attachment
    Slip fit
    Quantity
    Sold individually
    Substrate Material
    Ceramic honeycomb
    Substrate Material
    OEM
    Outlet Quantity
    Two
    Case Material
    Stainless steel
    Inlet Diameter (in.)
    2
    Outlet Diameter (in.)
    2
    Inlet Quantity
    One
    Manufacturer's Part Number:
    94002

    For engines built before 1996, these catalytic converters have stainless steel ribbed bodies that minimize expansion/distortion when the converter heats up. The ribs form a channel that protects pads from direct exposure to exhaust gas, plus they keep the ceramic catalyst aligned. Rigid OE-type heat shields add structural stability, and strong 1/2" lap-joints fuse necks to the body (for best flow, necks don't extend into bodies). .


    Choosing the Correct Catalytic Converter
    1.
    Determine engine size and vehicle weight (there are legal limit regulations).

    2. Determine the type of catalytic converter being replaced:
  • Pre OBD-II converters are for vehicles built before 1996.
  • OBD-II converters must be used on vehicles built in 1996-Up.

    3. If the engine has been changed and is not the same model year as the chassis, proceed as follows:
  • For engines older than the chassis, select the converter based on the chassis model year.
  • For engines newer than the chassis, select the converter according to the engine requirement.

    4. It is necessary to know which type of catalytic converter was originally used on the vehicle: 2-Way, 3-Way, or 3-Way + Air. Required by the EPA, this information (abbreviations listed below) is on the vehicle emission control label in the engine compartment. The label should be visible on the firewall, hood's underside, radiator support, fan shroud, or shock tower.
  • 2-Way (Oxidation) = OC or COC
  • 3-Way (Oxidation Reduction) = TWC or ORC
  • 3-Way + Air (3-Way plus Oxidation) = TWC/OC or ORC/OC


    Note: 49-State Catalytic Converters are not legal for sale, installation, or use on licensed vehicles in the state of California.

  • Does Magnaflow 94002 fit your vehicle?

    Narrow Results

    1986-1987 SUBARU GL

    • CC: 1595
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.6
    • SubModel: BASE
    • EngineType: H4 ( 1.6 L / 1595 CC )

    1989-1990 SUBARU XT

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • SubModel: XT6
    • EngineType: ALL

    1983 SUBARU GL

    • CC: 1781
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.8
    • SubModel: BASE
    • EngineType: H4 ( 1.8 L / 1781 CC )

    1988 SUBARU GL-10

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • SubModel: BASE
    • EngineType: ALL

    1986 SUBARU DL

    • CC: 1781
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.8
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: 4
    • EngineType: H4 ( 1.8 L / 1781 CC )

    1980 SUBARU BRAT

    • CC: 1781
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.8
    • SubModel: DL
    • EngineType: H4 ( 1.8 L / 1781 CC )

    1984-1987 SUBARU GL

    • CC: 1781
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.8
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: 5
    • EngineType: H4 ( 1.8 L / 1781 CC )

    1980 SUBARU STANDARD

    • CC: 1595
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.6
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: 2
    • EngineType: H4 ( 1.6 L / 1595 CC )

    1990 SUBARU LOYALE

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: RS

    1992 SUBARU LEGACY

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: L

    1989 SUBARU GL

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: BASE

    1988 SUBARU GL

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • SubModel: BASE
    • EngineType: ALL

    1984 SUBARU GL

    • CC: 1781
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.8
    • SubModel: BASE
    • EngineType: H4 ( 1.8 L / 1781 CC )

    1992 SUBARU LEGACY

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: L 4X4

    1990-1991 SUBARU LEGACY

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1982 SUBARU DL

    • CC: 1781
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.8
    • SubModel: BASE
    • EngineType: H4 ( 1.8 L / 1781 CC )

    1980 SUBARU DL

    • CC: 1781
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.8
    • SubModel: BASE
    • EngineType: H4 ( 1.8 L / 1781 CC )

    1986 SUBARU DL

    • CC: 1781
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.8
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: 5
    • EngineType: H4 ( 1.8 L / 1781 CC )

    1980 SUBARU BRAT

    • CC: 1595
    • Fitment_Note: Cutting And Welding Required During Installation
    • Liter: 1.6
    • SubModel: GL
    • EngineType: H4 ( 1.6 L / 1595 CC )

    1978-1979 SUBARU BRAT

    • Fitment_Note: Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: DL

    1992 SUBARU LEGACY

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: SPORT

    1986-1987 SUBARU XT

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: GL

    1980 SUBARU BRAT

    • CC: 1595
    • Fitment_Note: Cutting And Welding Required During Installation
    • Liter: 1.6
    • SubModel: DL
    • EngineType: H4 ( 1.6 L / 1595 CC )

    1980 SUBARU BRAT

    • CC: 1781
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.8
    • SubModel: GL
    • EngineType: H4 ( 1.8 L / 1781 CC )

    1989-1991 SUBARU XT

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • SubModel: GL
    • EngineType: ALL

    1986-1987 SUBARU GL

    • CC: 1781
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.8
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: 4
    • EngineType: H4 ( 1.8 L / 1781 CC )

    1988-1989 SUBARU DL

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • SubModel: ALL
    • EngineType: ALL

    1986-1988 SUBARU XT

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: DL

    1986-1987 SUBARU GL

    • CC: 1781
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.8
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: 5
    • EngineType: H4 ( 1.8 L / 1781 CC )

    1987 SUBARU DL

    • CC: 1781
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.8
    • SubModel: BASE
    • EngineType: H4 ( 1.8 L / 1781 CC )

    1984-1987 SUBARU GL

    • CC: 1781
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.8
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: 4
    • EngineType: H4 ( 1.8 L / 1781 CC )

    1992 SUBARU LEGACY

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: LS 4X4

    1990 SUBARU LOYALE

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: BASE

    1993-1994 SUBARU LEGACY

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1987 SUBARU DL

    • CC: 1781
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.8
    • SubModel: BASE
    • EngineType: H4 ( 1.8 L / 1781 CC )

    1980-1982 SUBARU GL

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1980-1982 SUBARU GLF

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1980 SUBARU DL

    • CC: 1595
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.6
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: 2
    • EngineType: H4 ( 1.6 L / 1595 CC )

    1983-1984 SUBARU DL

    • CC: 1595
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.6
    • SubModel: BASE
    • EngineType: H4 ( 1.6 L / 1595 CC )

    1983 SUBARU BRAT

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: DL

    1986-1987 SUBARU XT

    • CC: 1781
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.8
    • Aspiration: T
    • SubModel: GL-10 TURBO
    • Engine Vin: 7
    • EngineType: H4 ( 1.8 L / 1781 CC )

    1985 SUBARU DL

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • SubModel: ALL
    • EngineType: ALL

    1981-1987 SUBARU STANDARD

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1983-1984 SUBARU DL

    • CC: 1781
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.8
    • SubModel: BASE
    • EngineType: H4 ( 1.8 L / 1781 CC )

    1991-1994 SUBARU LOYALE

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1991 SUBARU XT

    • CC: 2672
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 2.7
    • Aspiration: N
    • SubModel: XT6
    • Engine Vin: 8
    • EngineType: H6 ( 2.7 L / 2672 CC )

    1983 SUBARU BRAT

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: GL

    1984-1987 SUBARU BRAT

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1986-1987 SUBARU XT

    • CC: 1781
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.8
    • Aspiration: T
    • SubModel: GL-10 TURBO
    • Engine Vin: 4
    • EngineType: H4 ( 1.8 L / 1781 CC )

    1981 SUBARU DL

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1992 SUBARU LEGACY

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: LSI

    1981-1982 SUBARU BRAT

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: ALL

    1987 SUBARU XT

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: GL-10

    1992 SUBARU LEGACY

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: LS

    1988 SUBARU XT

    • CC: 1781
    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • Liter: 1.8
    • Aspiration: N
    • SubModel: GL
    • Engine Vin: 4
    • EngineType: H4 ( 1.8 L / 1781 CC )

    1985-1987 SUBARU GL-10

    • Fitment_Note: Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
    • EngineType: ALL
    • SubModel: BASE

    Items You Need

    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.

    Tools:

    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.