Proform Distributor Bushing Installer Tool
Proform's Chrysler Bushing Install Tool makes installing the lower distributor drive shaft bushing into the engine block and reaming easy. Because the bushing is soft, and will distort when driven in, a special tool is required for proper installation. This tool fits inside the shaft diameter portion of the bushing, keeping the bushing stiff when pounding it in.
Simply pound the end of the tool to install the bushing, and spin the nut to remove the tool and provide a clean ream upon exit. Thus, preparing the bushing for proper clearance prior to distributor installation. Otherwise, the shaft will not go in as the hole will be too small for it. The distributor shaft should go in, and turn freely, but not be too loose. If it's too tight, repeat the reaming process with tool until proper fit.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.